研究業績

論文

2023

113. 金範埈: 予防医学におけるウェアラブルバイオセンサー：生体分解性マイクロニードルパッチの開発、（特別寄稿論文）、日本情報経営学会誌, Vol. 38, No. 2, pp.33-38, 2023 (Journal of Information and Management, ISSN 1882-2614, Wearable Biosensor for Predictive/Preventive Medicine: Biodegradable Polymer Microneedles Patch)
112. Kai Takeuchi, Junsha Wang, Beomjoon Kim, Tadatomo Suga, and Eiji Higurashi: Room temperature bonding of Au assisted by self-assembled monolayer,Applied Physics Letters, 122, 051603, 2023 (https://doi.org/10.1063/5.0128187)
111. Hai-Tao Deng, Danliang Wen, Jingrui Liu, Xinran Zhang, Yilin Wang, Peng Huang, Beomjoon Kim, Xiaosheng Zhang: Stretchable multifunctional sensor based on porous silver nanowire/silicone rubber conductive film, Nano Research, pp.1-10, 2022 (https://doi.org/10.1007/s12274-023-5400-0)

2022

110. Leilei Bao, Jongho Park, Boyu Qin, and Beomjoon Kim: Anti-SARS-CoV-2 IgM/IgG antibodies detection using a patch sensor containing porous microneedles and a paper-based immunoassay, Scientific Reports, 12:10693, 2022 (https://doi.org/10.1038/s41598-022-14725-6) (C2C Acknow)
109. Xiaobin Wu, Jongho Park, Siu Yu A. Chow, Maria Carmelita Z. Kasuya, Yoshiho Ikeuchi, and Beomjoon Kim: Localised light delivery on melanoma cells using optical microneedles, Biomedical Optics Express, Vol. 13, Issue 2, pp. 1045-1060, 2022 (https://doi.org/10.1364/BOE.450456) (C2C Acknow)
108. Kai Takeuchi, Nobuyuki Takama, Kirti Sharma, Oliver Paul, Patrick Ruther, Tadatomo Suga, Beomjoon Kim: Microfluidic chip connected to porous microneedle array for continuous ISF sampling, Drug Delivery and Translational Research, 12, pp. 435-443, 2022 (https://doi.org/10.1007/s13346-021-01050-0) (C2C Acknow)

2021

107. Leilei Bao, Jongho Park, Gwenael Bonfante, and Beomjoon Kim: Recent advances in porous microneedles: materials, fabrication, and transdermal applications, Drug Delivery and Translational Research, 12, pp. 395-414, 2021(https://doi.org/10.1007/s13346-021-01045-x)　 (C2C Acknow)
106. Libo Wu, Jongho Park, Yuto Kamaki, and Beomjoon Kim: Optimisation of fused deposition modelling based fabrication process for polylactic acid microneedles, Springer Nature, Microsystems & Nanoengineering, 7 (58), 2021 (https://doi.org/10.1038/s41378-021-00284-9)　 (C2C Acknow)
105. Dan-Liang Wen, De-Heng Sun, Peng Huang, Wen Huang, Meng Su, Ya Wang, Meng-Di Han, Beomjoon Kim, Jürgen Brugger, Hai-Xia Zhang, and Xiaosheng Zhang: Recent Progress on Silk Fibroin-Based Flexible Electronics, Microsystems & Nanoengineering, 7, 35, 2021 (https://doi.org/10.1038/s41378-021-00261-2)
104. Hai-Tao Deng, xin-Ran Zhang, Zhi-Yong Wang, Dan-Liang Wen, Yan-Yuan Ba, Beomjoon Kim, Meng-Di Han, Hai-Xia Zhang, Xiao-Sheng Zhang: Super-stretchable multi-sensing triboelectric nanogenerator based on liquid conductive composite, Nano Energy, Vol.83, 105823, 2021 (https://doi.org/10.1016/j.nanoen.2021.105823)

2020

103. D. Decanini, A. Harouri, Y. Mita, B.J. Kim, and G. Hwang: 3D micro fractal pipettes for capillary based robotic liquid handling, Review of Scientific Instruments, 91, 086104, 2020 (C2C Acknow) https://doi.org/10.1063/5.0018456
102. Meng Su, Beomjoon Kim: Fiber substrated high-power wearable triboelectric nanogenerator prepared from electrospinning and electrospray, ACS Applied Nano Materials, 2020 (C2C Acknow)
101. Kai Takeuchi, Nobuyuki Takama, Rie Kinoshita, Teru Okitsu, Beomjoon Kim: Flexible and porous microneedles of PDMS for continuous glucose monitoring, Biomedical Microdevices, 2020
100. Hakjae Lee, Gwenael Bonfante, Yui Sasaki, Nobuyuki Takama, Tsuyoshi Minami and Beomjoon Kim: Porous microneedles on a paper for screening test of prediabetes, Medical Devices and Sensors, Vol.3, Issue 4, e10109, 2020 (C2C Acknow) https://doi.org/10.1002/mds3.10109 (cover page)
99. Gwenaël Bonfante, Hakjae Lee, Leilei Bao, Jongho Park, Nobuyuki Takama, Beomjoon Kim: Comparison of Polymers to enhance mechanical properties of microneedles for bio-medical applications, Micro and Nano Systems Letters, Vol. 8, 13, 2020 (JSPS ack), https://doi.org/10.1186/s40486-020-00113-0
98. Libo Wu, Pranav Shrestha, Martina Iapichino, Yicheng Cai, BeomJoon Kim, Boris Stoeber: Characterization Method for Calculating Diffusion Coefficient of Drug from Microneedles into The Skin, Journal of Drug Delivery Science and Technology, 2020
97. M. Su, J. Brugger, and BJ Kim: Wearable Triboelectric Generator based on a Hybrid Mix of Carbon Nanotube and Polymer Layers, Journal of Physics: Conference Series, vol. 1407, 012047, 2019
96. Meng Su, Juergen Brugger, Beomjoon Kim: Simply structured wearable triboelectric nanogenerator based on a hybrid composition of carbon nanotubes and polymer layer, Int. Journal of Precision Engineering and Manufacturing-Green Technology (IJPEM-GT), https://doi.org/10.1007/s40684-020-00212-8, 2020　(C2C Acknow)

2019

95. Shohei Kaneda, Jiro Kawada, Marie Shinohara, Momoko Kumemura, Ryohei Ueno, Tomoaki Kawamoto, Kenji Suzuki, Beomjoon Kim, Yoshiho Ikeuchi, Yasuyuki Sakai, Dominique Collard, Hiroyuki Fujita, and Teruo Fujii: Boyden chamber-based compartmentalized tumor spheroid culture system to implement localized anticancer drug treatment, AIP Biomicrofluidics, 13, 054111, 2019 (doi: 10.1063/1.5125650)
94. Kensaku Hayashi, Momoko Kumemura, Shohei Kaneda, Vivek Menon, Laurent Jalabert, Saeko Tachikawa, Mehmet C. Tarhan, Teruo Fujii, Beomjoon Kim, and Hiroyuki Fujita: Optimization of Surface Treatment on MEMS Probes for Single-cell Capture and Release, Sensors and Materials, Vol. 31, No 9 (2), pp. 2873-2881, 2019 (https://doi.org/10.18494/SAM.2019.2322)
93. Petra Arany, Eszter Róka, Laurent Mollet, Anthony W. Coleman, Florent Perret, Beomjoon Kim, Renátó Kovács, Adrienn Kazsoki, Romána Zelkó, Rudolf Gesztelyi, Zoltán Ujhelyi, Pálma Fehér, Judit Váradi, Ferenc Fenyvesi, Miklós Vecsernyés and Ildikó Bácskay: Fused Deposition Modeling 3D Printing: Test Platforms for Evaluating Post-Fabrication Chemical Modifications and In-Vitro Biological Properties, Pharmaceutics, 11(6), 277, 2019 (https://doi.org/10.3390/pharmaceutics11060277)
92. Yannick Tauran, José Pedro Cerón-Carrasco, Moez Rhimi, Florent Perret, Beomjoon Kim, Dominique Collard, Anthony W. Coleman, and Horacio Pérez-Sánche: Size and Flexibility Define the Inhibition of the H3N2 Influenza Endonuclease Enzyme by Calix[n]arenes, Antibiotics, 8(2), 73, 2019 (https://doi.org/10.3390/antibiotics8020073)
91. Kai Takeuchi, Nobuyuki Takama, Beomjoon Kim, Kirti Sharma, Oliver Paul, Patrick Ruther: Microfluidic Chip to Interface Porous Microneedles for ISF Collection, Biomedical Microdevices, 21:28, Vol. 28, (10 pges), Springer Open, 2019 (https://doi.org/10.1007/s10544-019-0370-4)

2018

90. Kai Takeuchi and Beomjoon Kim: Funtionalized Microneedles for Continuous glucose Monitoring, Nano Convergence, 5, 28, Springer Open, 2018 (Ackn K29-144) https://doi.org/10.1186/s40580-018-0161-2
89. Jongho Park, Beomjoon Kim: Localized porous silicon structures obtained by using shadow mask-assisted patternable illumination, Microelectronic Engineering, vol. 200, pp. 32-38, 2018
88. 日比柾宏、高間信行、金範埈: 確率共振を用いた低周波振動エネルギーハーベスタによるワイヤレスセンサネットワーク、（特別寄稿論文）、日本情報経営学会誌, Vol. 38, No. 3, pp.1-6, 2018
87. Aleksander Shkurenko, Adina N. Lazar, Dominique Collard, Alda Navaza, Beomjoon Kim, Yannick Tauran, Florent Perret, Catherine Journet-Gautier, Anthony W. Coleman and Kinga Suwinska: The solid-state structures of organic salts formed by calix[4]arene dihydroxyphosphonic acid with nucleic bases cations: adeninium, cytosinium, guaninium and uracilium, Supramolecular Chemistry, Vol. 30, pp 545-559, 2018 (doi.org/10.1080/10610278.2018.1439171)
86. Xiao-Sheng Zhang, Mengdi Han, Beomjoon Kim, Jing-Fu Bao, Juergen Brugger, Haixia Zhang: All-in-One Self-Powered Flexible Microsystems Based on Triboelectric Nanogenerators, Nano Energy, Vol. 47, pp. 410-426, 2018 (https://doi.org/10.1016/j.nanoen.2018.02.046)
85. Yannick Tauran, Mehmet C. Tarhan, Laurent Mollet, Jean Baptiste Gerves, Momoko Kumemura, Laurent Jalabert, Nicolas Lafitte, Ikjoo Byun, Beomjoon Kim, Hiroyuki Fujita, Dominique Collard, Florent Perret, Mikael Desbrosses, Didier Leonard, Christelle Goutaudier, and Anthony W. Coleman: Elucidating the mechanism of the considerable mechanical stiffening of DNA induced by the couple Zn2+/Calix[4]arene-1,3-O-diphosphorous acid, Scientific Reports, 8, 1226, 2018 (doi:10.1038/s41598-018-19712-4)
84. 蘇萌、小林大、高間信行、金範埈: 確率共振を用いたハイブリッド振動エネルギーハーベスタ、電気学会論文誌E, Vol.138, No.5, pp.185-190, 2018 (Meng Su, Dai Kobayashi, Nobuyuki Takama and Beomjoon Kim: Hybrid Vibration Energy Harvester based on Stochastic Resonance, IEEJ Transactions on Sensors and Micromachines, 2018, https://doi.org/10.1541/ieejsmas.138.185).

2017

83. Imed Montasser, Anthony Coleman, Yannick Tauran, Grégoire Perret, Laurent Jalabert, Dominique Collard, Beomjoon Kim, and Mehmet Tarhan: Direct measurement of the mechanism by which Magnesium specifically modifies the mechanical properties of DNA, AIP Biomicrofluidics – fundamentals, Perspectives & Applications (BIOMGB), Vol.11, Issue 5, pp.051102 (4 pages), 2017
82. Xiao-Sheng Zhang, Meng Su, Juergen Brugger, Beomjoon Kim: Pencilling a Triboelectric Nanogenerator on Paper for Autonomous Power MEMS Applications, Nano Energy, Vol. 33, pp. 393-401, Elsevier, 2017
81. Ryohei Ueno, and Beomjoon Kim: Reliable transfer technique of gold micro heater through different affinities of thiol (–SH) and amine (–NH2) groups, Microelectronic Engineering, Vol.171, pp. 6-10, 2017

2016

80-5 金正東、鄭道鉉、金範埈: Droplet-born Air Blowing (DAB)法を用いた生体溶解性マイクロニードルを開発 (Development of dissoluble microneedles by using Droplet-born Air Blowing), 精密工学会誌 Journal of the Japan Society for Precision Engineering, Vol. 82, No.12, pp. 1014-1017, December, 2016
79-4 Mehmet C.Tarhan, Nicolas Lafitte, Yannick Tauran, Laurent Jalabert, Momoko KUmemura,Grégoire Perret, Beomjoon Kim, Anthony W. Coleman, Hiroyuki Fujita & Dominique Collard: A rapid and practical technique for real-time monitoring of biomolecular interactions using mechanical responses of macromolecules, Scientific Reports,6, 28001, (doi:10.1038/srep28001), June, 2016
78-3. Filiz Yesilkoy, Valentin Flauraud, Matthieu Rüegg, Beomjoon Kim, and Jürgen Brugger: 3D nanostructures fabricated by advanced stencil lithography, Nanoscale RSC, Vol.8, pp.4945-4950, 2016 (impact factor:7.394)
77-2. Filiz Yesilkoy, Ryohei Ueno, Benoît Xavier Emmanuel Desbiolles, Marco Grisi, Yasuyuki Sakai, Beomjoon Kim, Juergen Brugger: Highly Efficient and Gentle Trapping of Single Cells in Large Microfluidic Arrays for Time-lapse Experiments, AIP Biomicrofluidics – fundamentals, Perspectives & Applications(BIOMGB), Vol.10,Issue 1, pp.014120, 2016 (impact factor:3.464)
76-1. Jongho Park, and Beomjoon Kim: Fabrication of roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing, Journal of Micromechanics and Microengineering, Vol.26,No.3 , pp.035007(10pp), 2016

2015

75-8. Xia-Sheng Zhang, Juergen Brugger, Beomjoon Kim: A Silk-fibroin-based transparent triboelectric generator suitable for autonomous sensor network, Nano Energy, 20, pp. 37-47, 2016 (doi:10.1016/j.nanoen.2015.11.036, Impact factor 10.355)
74-7. M Kawano, Y Zhang, R Zheng, K Nakano and B Kim: Design and manufacture of perpendicular bi-stable cantilever for vibrational energy harvesting on the basis of stochastic resonance, Journal of Physics: Conference Series 660, 012104, (5 pages), 2015 (doi:10.1088/1742-6596/660/1/012104)
73-6. G. Perret, P. Ginet, M.C. Tarhan, A. Baccouche, T. Lacornerie, M. Kumemura, L. Jalabert, F. Cleri, E.F. Lartigau, B.J. Kim, S.L. Karsten, H. Fujita, Y. Rondelez, T. Fujii, D. Collard: Nano systems and devices for applications in biology and nanotechnology, Solid-State Electronics (An International Journal), Vol. 115, Part B, pp. 66-73, Elsevier, (http://dx.doi.org/10.1016/j.sse.2015.08.019) , January 2016
72-5. Yannick Tauran, Beomjoon Kim, and Anthony W. Coleman FRSC: Bio-applications of Calix[n]arene Capped Silver nanoparticles, Journal of Nanoscience and Nanotechnology, Vol.15, pp. 1-19., 2015
71-4. Yannick Tauran, Anthony W. Coleman FRSC, and Beomjoon Kim: Cellular and in vivo biological activities of the calix[n]arenes, Current Organic Chemistry, Vol. 9, pp.1- , 2015 (DOI: 10.2174/1385272819666150608222114)
70-3. 水野雄貴、辺益周、金範埈、一木正聡: PZT薄膜キャパシタの作製及び自己組織化単分子膜を用いた樹脂基板への転写手法、電気学会論文誌E, Vol.135, No. 9, pp. , 2015 (Yuki Mizuno, Ikjoo Byun, Beomjoon Kim and Masaaki Ichiki: Transfer methods of PZT thin capacitor to flexible polymer by Self-Assembled Monolayers, IEEJ Transactions on Sensors and Micromachines, Vol.135, No. 9, pp. , 2015)
69-2. 上野遼平、フィリスイエスィルコイ、ユルゲンブルガー、金範埈: マイクロ流体デバイスの熱解析のための白金マイクロヒーターの電気特性、電気学会論文誌E, Vol.135, No. 8, pp. , 2015 (Ryohei Ueno, Filiz Yesilköy, Jürgen Brugger, Beomjoon Kim: Electrical property of platinum micro heater for thermal analysis of microfluidic device, IEEJ Transactions on Sensors and Micromachines, Vol.135, No. 8, pp. , 2015)
68-1. 天野佑基、辺益周、金範埈、一木正聡: SAMトランスファー法を用いた薄膜構造体の樹脂基板への転写技術、電気学会論文誌E, 135, No. 4, pp. , 2014 (Yuki Amano, Ikjoo Byun, Beomjoon Kim and Masaaki Ichiki: Fabrication of thin film capacitors embedded in flexible polymer by SAM transfer methods, IEEJ Transactions on Sensors and Micromachines, Vol.135, No. 4, pp.118-121, 2015, April)

2014

67-5. Yannick Tauran, Christophe Anjard, Beomjoon Kim, Moez Rhimi and Anthony W. Coleman: Large negatively charged organic host molecules as inhibitors of endonuclease enzymes, Chemical Communications (Chem. Commun.), Vol.50, Issue 77, pp. 11404-11406, 2014 (DOI: 10.1039/C4CC04805A)
66-4. Ikjoo byun and Beomjoon Kim: Fabrication of three-dimensional PDMS microstructures by selective bonding and cohesive mechanical failure, Microelectronic Engineering, vol. 121, pp.92-95, 2014
65-3. Ikjoo Byun, Ryohei Ueno and Beomjoon Kim: Micro-heaters embedded in PDMS fabricated using dry peel-off process, Microelectronic Engineering, Vol. 121, pp.1-4, 2014 (http://dx.doi.org/10.1016/j.mee.2014.02.029)
64-2. Oya Koc, M. Cagatay Tarhan, Yoshiyuki Kato, Hiroyuki Fujita, and Beomjoon Kim: Drop-on-demand patterning of Microtubules by using a needle type micro dispenser, IEEJ Transactions on Sensors and Micromachines, Vol. 134, No. 5, pp.114-118, 2014 (コチュオヤ、タルハンメフメットチャータイ、加藤好志、藤田博之、金範埈: マイクロニードル式ディスペンサを用いた微小管のオンデマンド型マイクロパターニング技術、電気学会論文誌E)
63-1. Jose Ordonez-Miranda, Laurent Tranchant, Beomjoon Kim, Yann Chalopin, Thomas Antoni, and Sebastian Volz: Effects of anisotropy and size of polar nano thin films on their thermal conductivity due to surface phonon-polaritions, Applied Physics Express, Vol.7, pp.035201, http://dx.doi.org/10.7567/APEX.7.035201, 2014

2013

62-11. Jose Ordonez-Miranda, Laurent Tranchant, Beomjoon Kim, Yann Chalopin, Thomas Antoni, Sebastian Volz: Quantized Thermal Conductance of Nanowires at Room Temperature due to Surface Phonon-Polaritons, Physical Review Letters, 112, 055901 (5 pages), 2014
61-10. Ikjoo Byun, Anthony W. Coleman and Beomjoon Kim: Microcontact printing using a flat metal-embedded stamp fabricated by dry peel-off process, RSC Advanced, Vol. 3, Issue 47, pp. 24872-24876, 2013 (Online publ 2013.10.17, DOI: 10.1039/C3RA44072A, Communication)
60-9. Ikjoo byun, Anthony W. Coleman, and Beomjoon Kim: SAM meets MEMS; Reliable Fabrication of Stable Au patterns Embedded in PDMS Using Dry Peel-off Process, Microsystem Technologies, vol. 20, Issues 10-11, pp.1783-1789, 2014 (DOI 10.1007/s00542-013-1923-8, 2013 published online)
59-8. Yannick Tauran, Arnaud Brioude, Anthony W. Coleman, Moez Rhimi, and Beomjoon Kim: Molecular recognition by gold, silver and copper nanoparticles, Nanoparticle molecular recognition, (ESPS) World Journal of Biological Chemistry (World J biol Chem), Vol. 4, Issue 3, pp. 35-63, 2013
58-7. Samira Boudebbouze, Anthony W. Coleman, Yannick Tauran, Hela Mkaouar, Florent Perret, Alexandrine Garnier, Arnaud Brioude, Beomjoon Kim, Emmanuelle Maguin and Moez Rhimi: Discriminatory antibacterial effects of calix[n]arene capped silver nanoparticles with regard to Gram positive and Gram negative bacteria, Chemical Communications (Chem. Commun.), Vol. 49, Issue 64, pp. 7150 (3 pages), 2013 (DOI: 10.1039/C3CC42838A)
57-6. Whitney Longsine-Parkera, Han Wanga, Chiwan Koo, Jeongyun Kim, Beomjoon Kim, Arul Jayaraman, and Arum Han: Microfluidic Electro-Sonoporation: A Multi-Modal Cell Poration Methodology through Simultaneous Application of Electric Field and Ultrasonic Wave, Lab Chip, Vol.13, Issue 11, pp. 2144-2152, DOI: 10.1039/C3LC40877A, 2013
56-5. Ikjoo Byun, Anthony W. Coleman, and Beomjoon Kim: Transfer of Thin Au films to Polydimethylsiloxane (PDMS) with Reliable Bonding Using (3-Mercaptopropyl)trimethoxysilane (MPTMS) as a Molecular Adhesive, Journal of Micromechanics and Microengineering, Vol. 23, pp. 085016 (10pp), 2013
55-4. Yannick Tauran, Arnaud Brioude, Beomjoon Kim, Florent Perret and Anthony W. Coleman: Anionic calixarene-capped silver nanoparticles show species-dependent binding to Serum Albumins, Molecules, 18 (5), (ISSN 1420-3049, international peer-reviewed Open Access journal published by MDPI), Special Issue “Calixarenes and Resorcinarenes”, pp. 5993-6007, doi:10.3390/molecules18055993, 2013
54-3. Dominique Collard, Soo Hyeon Kim, Toshihisa Osaki, Momoko Kumemura, Beomjoon Kim, Dominique Fourmy, Teruo Fujii, Shoji Takeuchi, Stanislav L. Karsten and Hiroyuki Fujita: Nano bioresearch approach by microtechnology, Drug Discovery Today, http://dx.doi.org/10.1016/j.drudis.2013.02.002, 2013
53-2. J. Ordonez-Miranda, Laurent Tranchant, Takuro Tokunaga, Beomjoon Kim, Bruno Palpant, Yann Chalopin, Thomas Antoni, and Sebastian Volz: Anomalous thermal conductivity by surface phonon-polaritons of polar nano thin films due to their asymmetric surrounding media, Journal of Applied Physics, Vol. 113, pp. 084311-8, 2013
52-1. Beomjoon Kim: 進むバイオとマイクロ・ナノ化学チップの融合, 日本機械学会誌、（解説論文） Vol.116, No. 1130, pp. 47-49, 2013 (Journal of the Japan Society of Mechanical Engineers)

2012

51-10. Laurent Tranchant, Takuro Tokunaga, Beomjoon Kim, Nobuyuki Takama, Yann Chalopin and Sebastian Volz: Surface Phonon Polariton Mediated Thermal Conduction of a Micrometric Glass Waveguide, Journal of Physics, conference series, Vol.395, pp. 012087, 2012 (doi:10.1088/1742-6596/395/1/012087, KAKEN B)
50-9. Takuro Tokunaga, Laurent Tranchant, Nobuyuki Takama, Sebastian Volz and Beomjoon Kim: Experimental Study of Heat Transfer in Micro Glass Tubes Mediated by Surface Phonon Polaritons, Journal of Physics, conference series, Vol.395, pp. 012108, 2012 (doi:10.1088/1742-6596/395/1/012108, KAKEN B)
49-8. Jongho Park, Hiroyuki Fujita and Beomjoon Kim: Fabrication of 3D Micro Structures on Nonplanar Substrates and Its Applications for Roll Micro contact Printing, (Cambridge Journals Online) MRS Online Proceedings Library, Vol. 1436, mrss12-1468-vv05-14, doi:10.1557/opl.2012.1508, 2012
48-7. Yannick Tauran, Moez Rhimi, Ryohei Ueno, Marie Grosso, Arnaud Brioude, Erwann Janneau, Kinga Suwinska, Rima Kassab, Patrick Shahgaldian, Alessandro Cumbo, Bernard Fenet, Beomjoon Kim and Anthony W. Coleman: Cytosine: para-sulphonato-calix[4]arene assemblies: in solution, in the solid-state and on the surface of hybrid silver nanoparticles, Journal of Inclusion Phenomena and Macrocyclic Chemistry (J. Incl. Phenom. Macrocycl. Chem.), Vol. 74, 2012 (DOI: 10.1007/s10847-012-0235-4)
47-6. Florent Perret, Yannick Tauran, Kinga Suwinska, Beomjoon Kim, Cyrielle Chassain-Nely, Maxime Boulet, and Anthony W. Coleman: Molecular recognition and transport of Active Pharmaceutical Ingredients on anionic calix[4]arene capped silver nanoparticles, Journal of Chemistry (Hindawi Publishing Corporation), Vol. 2013, Article ID 191828, 9 pages, 2012 (http://dx.doi.org/10.1155/2013/191828)
46-5. Yannick Tauran, Arnaud Brioude, Patrick Shahgaldian, Alessandro Cumbo, Beomjoon Kim, Florent Perret, Anthony W. Coleman and Imed Montasser: Calix-arene silver nanoparticles interactions with surfactants are charge, size and critical micellar concentration dependent, Chemical Communications (Chem. Commun.) Vol. 48, Issue 76, pp. 9483-9485, 2012
45-4. Jongho Park, Beomjoon Kim: 3D micro patterning on a concave substrate for creating the replica of a cylindrical PDMS stamp, Microelectronic Engineering, Vol. 98, pp. 540-543, Special issue of MNE2011, 2012 (http://dx.doi.org/10.1016/j.mee.2012.07.034)
44-3. Ikjoo Byun, Jongho Park, Joonwon Kim and Beomjoon Kim: Fabrication of PDMS Nano-stamp by Replicating Si Nano-moulds Fabricated by Interference Lithography, Key Engineering Materials, Vol 516, pp. 25-29, 2012
43-2. 朴　鍾淏, 高間信行, 藤田博之，金　範埈: 凹面基板上の三次元マイクロパターニング及び円柱形ポリマースタンプ製作への応用、電気学会論文誌E, Vol. 132, No. 9, pp. 303-308, 2012 (Jongho Park, Nobuyuki Takama, Hiroyuki Fujita, and Beomjoon Kim: Fabrication of 3D Micro Patterns on Concave Substrate and Its Application for the Fabrication of Cylindrical Polymer Stamps, IEEJ Transactions on Sensors and Micromachines, Vol. 132, No.9, pp.303-308, 2012)
42-1. Jongho Park, Jacques Fattaccioli, Hiroyuki Fujita and Beomjoon Kim: Fabrication of Aluminum/Alumina Patterns using Localized Anodization of Aluminum, Int. Journal of Precision Engineering and Manufacturing (IJPEM), Vol.13, No.5, pp. 765-770, May, 2012

2011

41. G. Tortissier, P. Ginet, B. Daunay, L. Jalabert, P. Lambert, B. Kim, H. Fujita and H. Toshiyoshi: CF4 plasma treatment-assisted inkjet printing for color pixel flexible display, Journal of Micromechanics and Microengineering, 21, pp. 105021 (10 pages), 2011 (doi:10.1088/0960-1317/21/10/105021)
40. Patrick Ginet, Kevin Montagne, Sho Akiyama, Ali Rajabpour, Akiyoshi Taniguchi, Teruo Fujii, Yasuyuki Sakai, Beomjoon Kim, Dominique Fourmy and Sebastian Volz: Towards Single Cell Heat Shock Response by Accurate Control on Thermal Confinement with an On-Chip Microwire Electrode, Lab Chip, 11, pp.1513, DOI:10.1039/C0LC00701C, 2011
39. Jongho Park, Hiroyuki Fujita, and Beomjoon Kim: Fabrication of metallic microstructure on curved substrate by optical soft lithography and copper electroplating, Sensors and Actuator A, 168, pp. 105-111, 2011
38. Patrick Ginet, Sho Akiyama, Nobuyuki Takama, Hiroyuki Fujita and Beomjoon Kim: CMOS-compatible fabrication of top-gated field-effect transistor silicon nanowire-based biosensors, Journal of Micromechanics and Microengineering, 21, pp. 065008 (7 pages), 2011 (doi:10.1088/0960-1317/21/6/065008)

2010

37. F. Evenou, S. Couderc, B.J. Kim, T. Fujii, Y. Sakai: Microfibrillated cellulose sheets coating oxygen-permeable PDMS membranes induce rat hepatocyte 3D aggregation into stably-attached hemispheroids, Journal of Biomaterials Science (Polymer edition), DOI:10.1163/092050610X513242, 2010
36. Young Hak Cho and Beomjoon Kim: Single-cell electroporation and gene transfection using MEMS-based microdevice with cantilever-type microelectrode (멤스기반의 캔틸레버 형 전극을 가진 마이크로 디바이스를 이용한 단일세포의Electroporation및 유전자 Transfection), Journal of the Korean Society for Precision Engineering (한국정밀공학회지), Vol.27, No.5, pp. 85-91, 2010 (in Korean)
35. Y. H. Cho, J. Park, H. Park, X. Cheng, B. J. Kim, A. Han: Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing, Microfluidics and Nanofluidics, Vol.9, pp. 163-170, 2010 (published on line 2009,DOI 10.1007/s10404-009-0509-3)

2009

34. Sandrine Couderc, Vincent Blech, and Beomjoon Kim: New Surface Treatment and Microscale / Nanoscale Surface Patterning using Electrostatically Clamped Stencil Mask, Japanese Journal of Applied Physics, Vol. 48, No. 9, 095007 (6 pages), 2009
33. Céline Bottier, Jacques Fattaccioli, Mehmet C. Tarhan, Ryuji Yokokawa, Fabrice O. Morin, Beomjoon Kim, Dominique Collard and Hiroyuki Fujita: Active transport of oil droplets along oriented microtubules by kinesin molecular motors, Lab Chip, 9, 1694 – 1700, (DOI: 10.1039/b822519b), 2009
32. S Couderc, O Ducloux, BJ Kim and T Someya: A mechanical switch device made of a polyimide-coated microfibrillated cellulose sheet, Journal of Micromechanics and Microengineering, Vol. 19, No. 5, 055006 (11pp), May 2009 (doi: 10.1088/0960-1317/19/5/055006)
31. Janggil Kim, Nobuyuki Takama, Beomjoon Kim, Hiroyuki Fujita: Optical-Softlithographic technology for patterning on a curved surface, Journal of Micromechanics and Microengineering, Vol. 19, No. 5, 055017 (8pp), May 2009 (doi: 10.1088/0960-1317/19/5/055017)
30. K.D. Park, S.W. Lee, N. Takama, T. Fujii and B.J. Kim: Arbitrary-shaped nanochannels fabricated by polymeric deformation to achieve single DNA stretching, Microelectronic Engineering, Vol. 86, pp. 1385-1388, Special issue of MNE2008, 2009 (DOI:10.1016/j.mee.2009.02.003)
29. Y.T. Cheng, Y.H. Cho, N. Takama, P. Löw, C. Bergaud, and B.J. Kim: Simple fabrication of Si nanowire and its biological application, Journal of Physics, conference series, Vol.152, 012048 (7pp), 2009 (doi:10.1088/1742-6596/152/1/012048)
28. J.W. Kim, Y. Yamagata, B.J. Kim and T. Higuchi: Direct and dry micro-patterning of nano-particles by electrospray deposition through a micro-stencil mask, Journal of Micromechanics and Microengineering, Vol.19, 025021 (9 pp), 2009 (doi: 10.1088/0960-1317/19/2/025021)

2008

27. Peter Low, Beomjoon Kim, Nobuyuki Takama, and Christian Bergaud : High spatial resolution surface temperature mapping using fluorescent thermometry, Small, 4, No.7, pp. 908-914, 2008 (DOI: 10.1002/smll.200700581)
26. Y.H. Cho, S.W. Lee, T. Fujii and B.J. Kim: Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule, Microelectronic Engineering, Vol. 85/5-6, pp. 1275-1277, 2008 (DOI: 10.1016/j.mee.2008.03.001)
25. B. Samson, L. Aigouy, P. Low, C. Bergaud, B.J. Kim, M. Mortier: AC thermal imaging of nanoheaters using a scanning florescent probe, Applied Physics Letters, 92, 023101 (3 pages), 2008
24. Peter Low, Bruno Le Pioufle, Beomjoon Kim, Christian Bergaud: Assembly of CdSe/ZnS Nanocrystals on Microwires and Nanowires for Temperature Sensing, Sensors and Actuators B, Vol 130/1 pp. 175-180, 2008, (doi:10.1016/j.snb.2007.07.123)

2007

23. M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim: Nanochannels for Manipulation of DNA molecule using Various Fabrication Methods, Journal of Semiconductor Technology and Science (JSTS), Vol. 7, No. 4, pp. 256-261, 2007 (selected as best paper on International SoC Design conference 2007)
22. B. Samson, L. Aigouy, G. Tessier, P. Low, B. J. Kim, C. Bergaud, and M. Mortier: Thermal imaging of nickel wires with a fluorescent nanoprobe, Journal of Physics: Conference Series 92, 012089 (2007).
21, Y.H. Cho, S.W. Lee, B.J. Kim, and T. Fujii; Fabrication of silicon dioxide submicron channels without nanolithography for single biomolecule detection, Nanotechnology, Vol.18, No. 46, 21.Nov. 2007, 465303 (6 pp), 2007 (selected as cover page as well)
20. Janggil Kim, Nobuyuki Takama, Beomjoon Kim: Reprint of “Fabrication of Nano-Structures Using Inverse-μCP Technique with a Flat PDMS Stamp”, Sensors and Actuators A, Vol. 139/1-2, 1, pp. 356-363, 2007)

2006

19. Hideyuki F. Arata, Peter Low, Koji Ishizuka, Christian Bergaud, Beomjoon Kim, Hiroyuki Noji, and Hiroyuki Fujita: Temperature Distribution measurement on Microfabricated Thermodevice for Single biomolecular Observation Using fluorescent dye, Sensors and Actuators B, Vol. 117, pp. 339-345, 2006
18. Vincent Blech, Takama Nobuyuki and Beomjoon Kim: Nano stenciling through a cm2-wide silicon membrane, Journal of Vacuum Science and Technology B, Vol. 24 (1), pp. 55-58, Jan/Feb 2006
17. Younghak Cho, Beomjoon Kim, Seokkwan Hong, Jeongjin Kang: Fabrication and Characterization of Thermally Actuated Bimorph Probe for Living Cell Measurements with Experimental and Numerical Analysis, Journal of Mechanical Science and Technology, (KSME Int. J.) Vol. 20, No.3, pp. 297-309, 2006
16. Y.H. Cho, T. Yamamoto, Y. Sakai, T. Fujii, and B.J. Kim: Development of microfluidic device for electrical/physical characterization of single cell, IEEE Journal of Microelectromechanical Systems (Journal of MEMS), Vol.15, No.2, pp. 287-295, 2006
15. 趙永學、高間信行、山本貴富喜、藤井輝夫、金範ジュン: 生体単一細胞の測定用のMEMSデバイスの開発, 電気学会論文誌E, Vol. 126, No.3, pp. 89-94, 2006 ( Younghak Cho, Nobuyuki Takama, Takatoki Yamamoto, Teruo Fujii, Beomjoon Kim : Development of MEMS device for electrical and physical characterization of single cell, IEEJ Transactions on Sensors and Micromachines, Vol.126, No.3, pp. 89-94, 2006)

～2005

14. Y.H. Cho, D. Collard, L. Buchaillot, F. Conseil, B.J. Kim: Fabrication and optimization of bimorph micro probes for the measurement of individual bio-cells, Microsystem Technologies, Vol 12, Numbers 1-2, Dec. 2005, pp. 30-37, Springer-Verlag GmbH.
13. Janggil Kim, Nobuyuki Takama, Beomjoon Kim, Novel micro contact printing technique for Multipatterning of Self-Assembled Monolayers, Sensors and Materials, Vol.17, No.2, pp. 49-56, 2005
12. Younghak Cho, Tony Kuki, Yamato Fukuda, Hiroyuki Fujita, Beomjoon Kim　: Fabrication of sharp knife-edged micro probe card combined with shadow mask deposition, Sensors and Actuators A, Vol.114, Issues 2-3, pp.327-331, 2004
11. Yasuo Hoshi, Takayoshi Kawagishi, Shigeki Kawai, Dai Kobayashi, Janggil Kim, Younghak Cho, Shoji Takeuchi, Beomjoon Kim and Hideki Kawakatsu: Observation of Self-Assembled Monolayer using the Lateral Resonance of the cantilever in the contact and noncontact regions, Japanese Journal of Applied Physics, Vol.43, No.7B, pp.4533-4536, 2004
10. Tae Mutsuo, Tomonori Nakazawa, Toshiki Niino, Akio Yamamoto, Beomjoon Kim, Yasuo Hoshi, Kokichi Ikeda, Masahiro Michihata and Hideki Kawakatsu : Fabricating Five Atomic Force Microscopes with an Extremely Low Budget – A student project-, Japanese Journal of Applied Physics, Vol.43, No.7B, pp.4615-4618, 2004
9. Gyuman Kim, Beomjoon Kim, and Jurgen Brugger: All-photoplastic microstencil with self-alignment for multiple layer shadow-mask patterning, Sensors and Actuators A, 107, pp.132-136, 2003
8. G.M. Kim, B.J. Kim,E. S. ten Have, F. Segerink, N.F. van Hulst and J. Brugger: Photoplastic near-field optical probe with sub-100-nm aperture made by replication from a nanomold, Journal of Microscopy, Vol.209, Pt 31, pp.267-271, 2003
7. 赤松直樹，鈴木隆文，満渕邦彦，藤田博之，金範ジュン，竹内昌治: 神経電位計測用フレキシブルシリコンプローブアレイ, 電気学会論文誌E部門誌，123巻12号，pp.571-576, 2003
(A silicon Micro Probe Array on a Flexible Substrate for Neural Recording: Naoki Akamatsu, Takafumi Suzuki, Kunihiko Mabuchi, Hiroyuki Fujita, Beomjoon KIM, Shoji Takeuchi, IEEJ Transactions on Sensors and Micromachines, Vol.123, No.12, 2003. pp.571-576, in Japanese)
6. G.M. Kim, B.J. Kim, M. Liebau, J. Huskens, D.N. Reinhoudt and J. Brugger: Surface modification with self-assembled monolayers for nanoscale replication of photoplastic MEMS, IEEE Journal of Microelectromechanical Systems (Journal of MEMS), Vol.11, No.3, pp.175-181, 2002
5. B.J. Kim, J.W. Flamma, E.S. ten Have, M.F. Garcia-Parajo, N.F. van Hulst and J. Brugger: Moulded photoplastic probes for Near-field optical applications, Journal of Microscopy, Vol.202, 1, pp. 16-21, 2001
4. B.J. Kim, M. Liebau, J. Huskens, D.N. Reinhoudt, and J. Brugger: A self-assembled monolayer-assisted surface microfabrication and release technique, Microelectronic Engineering, 57, pp.755-760, 2001
3. B.J. Kim, T. Masuzawa, T. Bourouina: The vibroscanning method for the measurement of micro-hole profiles, Measurement Science and Technology, Vol.10, No.8, pp. 697-705, 1999
2. T. Masuzawa, B.J. Kim, C. Bergaud, M. Fujino: Twin-probe vibroscanning method for dimensional measurement of microholes, Annals of the CIRP, Vol.46, 1, pp.437-440, 1997
1. B.J. Kim, Y. Sawamoto, T. Masuzawa, M. Fujino: Advanced Vibroscanning method for microhole measurement – High speed and stability improvement of measurement technique, International Journal of Electrical Machining, No.1, pp. 41-44, 1996

国際会議

2023

217. Beomjoon Kim: Biomolecular Micro Needling Systems for Medicals, 2023 The 3^rd. PSTC (Predictive Safety Testing Consortium) Japan Safety Biomarker Workshop, Shonan Health Innovation Park, Fujisawa, 20. February 2023 (invited talk)
216. Kai Takeuchi, Junsha Wang, Tadatomo Suga, Beomjoon Kim, and Eiji Higurashi: Protection of activated Au surface using self-assembled monolayer for room temperature bonding, 2023 International Conference on Electronics Packaging (ICEP 2023), Kumamoto City Searshome Yume Hall, April 19-22, 2023.
215. Dominique Decanini, Abdelmounaim Harouri, Ayako Mizushima, Beomjoon Kim, Yoshio Mita, and Gilgueng Hwang : 3D printed miniaturized soft micro swimmer for multimodal 3D air-liquid navigation and manipulation, The 36^th. IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2023), Hybrid Conference, Munich, Germany, Proc. of MEMS 2023, pp. , Jan. 15-19, 2023 (oral presentation, C2C)

2022

214.Dominique Decanini, Abdelmounaim Harouri, Beomjoon Kim, Yoshio Mita, Gilgueng Hwang: Manufacturing of magnetically reconfigurable 3D printed micro fractal pipette array, French symposium on emerging Technologies for Micro-Nanofabrication (JNTE 2022), p. 29, Besancon, France Nov. 28- Dec. 2, 2022 (poster, C2C)
213. Heyi Jing, Boyu Qin, Leilei Bao, Jongho Park and Beomjoon Kim: Porous microneedles integrated paper sensor for cholesterol measurement, The 26^th. International Conference on Miniaturized Systems for Chemistry and Life Sciences, (MicroTAS 2022), Hangzhou China (hybrid), pp. 1133-1134, W150.f, 23-27 October, 2022 (poster)
212. Jongho Park, and Beomjoon Kim: Biotagging method using microneedle arrays for individual identification of animals, The 19^th. International Conference on Precision Engineering (ICPE 2022 in Nara), Nara, Japan, Nov.28-Dec. 2, 2022 (2022/11/29 Oral, C288)
211. Yosuke Koma, Yuko Tsuruma, Jongho Park, Shigenori Aoki, Shinya Takyu, Beomjoon Kim: Development of a simple glucose sensor patch using low melting-point polymer’s porous microneedles for pre-diabetic patients, 11^th. IEEE CPMT Symposium Japan 2022 (ICSJ 2022), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2022 (DOI: ), pp. 115-118, November 9-11, 2022 (oral)
210. Boyu Qin, Jongho Park, Heyi Jing, Leilei Bao, Beomjoon Kim: Porosity control of polylactic acid porous microneedles using microfluidic technology, 11^th. IEEE CPMT Symposium Japan 2022 (ICSJ 2022), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2022 (DOI: ), pp.127-130, November 9-11, 2022 (oral)
209. Beomjoon Kim: Bio molecular Needling System and healthcare, International Conference on Manipulations, Automation and Robotics at Small Scales (MARSS 2022), Toronto, Canada, July 25-29, 2022 (Plenary talk)
208. Xiaobin Wu, Jongho Park, and Beomjoon Kim: An optical Microneedles for Localized Light Therapy on Melanoma cells, The 35^th. IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2022), Hybrid Conference, Tokyo, Japan, Proc. of MEMS 2022, pp. 313-316, Jan. 9-13, 2022 (poster presentation)
207. Kai Takeuchi, Beomjoon Kim, Tadamoto Suga: Prolongation of Surface Activation Effect using a Self-Assembled Monolayer for Low Temperature Bonding of Au, the IEEE 72nd Electronic Components and Technology Conference (ECTC), G01-1631, San Diego, California, USA, May 31st.-June 3^rd., 2022

2021

206. Leilei Bao, Jongho Park, Soojin Shim, Misako Yoneda, Chieko Kai, Beomjoon Kim: A rapid COVID-19 diagnostic device integrating porous microneedles and the paper-based immunoassay biosensor, 10^th. IEEE CPMT Symposium Japan 2021 (ICSJ 2021), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2021 (DOI: 10.1109/ICSJ52620.2021.9648853), pp.164-167, November 10-12, 2021 (oral) (Best paper Awarded)
205. Kotaro Shobayashi, Xiaobin Wu, Jongho Park, Beomjoon Kim: Gold coated optical microneedles lens array for photothermal therapy, 10^th. IEEE CPMT Symposium Japan 2021 (ICSJ 2021), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2021 (DOI: ), pp.160-163, November 10-12, 2021 (oral)
204. Beomjoon Kim: Biomolecular Needling System for Medicals, The 34^th. International Microprocesses and Nanotechnology Conference MNC 2021, Symposium C (biological Phenomena and functions within Micro- and Nanospace), October 26-29, Online and On-Demand conference, 2021 (Oct.28 invited talk)
203. Gilgueng Hwang, Atsushi Toyokura, Akio Higo, Beomjoon Kim, and Yoshio Mita: Miniaturized soft transformable swimmer for environmentally friendly and sustainable fluidic carrier, DTIP 2021(the 23^rd. edition of the Symposium on Design, Test, Integration & Packaging of MEMS and MOEMS), Virtual event, August 25^th-27^th., 2021
202. Beomjoon Kim: Biomolecular Needling System for Medicals, The 16^th IEEE International Conference on Nano/Micro Engineered & Molecular Systems (IEEE-NEMS 2021 / ieee-nems.org/2021), Online Conference, Xiamen, China, April 25-29, 2021 (Keynote speaker)

2020

201. Kai Takeuchi, Fengwen Mu, Yoshiie Matsumoto, Beomjoon Kim, Tadamoto Suga: Surface activated bonding of glass using Aluminum Oxide intermediate layer for microchannel fabrication, ECS PRiME 2020, The Electrochemical Society the joint International meeting of PRiME 2020, G01-1631, October 4-9, 2020 (online oral presentation)

200. Gwenaël Bonfante, Hakjae Lee, Leilei Bao, Jongho Park, Beomjoon Kim: Biodegradable microneedles for bio-sensing application, 2020 NAMIS Marathon Workshop, Online Conference, Taiwan, November 23, 2020

199. Beomjoon Kim: Biomolecular Needling System for Medicals, Nowadays in Japan, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (Nov.,10, invited talk)

198. Gwenaël Bonfante, Hakjae Lee, Leilei Bao, Jongho Park, Nobuyuki Takama, Beomjoon Kim: Fabrication of a Hydrogel Microneedle Array for Glucose Monitoring, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (poster)

197. Martina Iapichino, Mehrsa Raeiszadeh, Libo Wu, Beomjoon Kim, Boris Stoeber: Photolithography-Free Fabrication of High Aspect Ratio Hollow Metallic Microneedles, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (oral presentation)

196. Leilei Bao, Gwenael Bonfante, Hakjae Lee, Nobuyuki Takama, Jongho Park, Beomjoon Kim: Biodegradable Porous Microneedle Patch Fabricated Via PLA Microspheres for Rapid Interstitial Fluid Extraction, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (poster)

195. Kai Takeuchi, Nobuyuki Takama, Beomjoon Kim: Porous PDMS Microneedles Coated with Hyaluronic Acid, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (oral presentation)

194. Xiaobin Wu, Junichiro Kono, Jongho Park, Nobuyuki Takama, and Beomjoon Kim: Optical Biodegradable Microneedles Combined Microlens Patch for Laser Therapy, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (oral presentation)

193. Hakjae Lee, Gwenael Bonfante, Jongho Park, and Beomjoon Kim: In Vitro Liquid Absorption of Porous PLGA Microneedle on Paper Substrate, The 6^th International Conference on Microneedles (Microneedles 2020), Online Conference, Seoul, Korea, November 10-11, 2020 (oral presentation)

192. Kai Takeuchi, Hakjae Lee, Gwenael Bonfante, Jongho Park, Tsuyoshi Minami, and Beomjoon Kim: Biodegradable porous microneedles for painless wearable bio sensors, The 9^th. International Conference of Manufacturing Technology Engineers (ICMTE 2020), October 19-20, 2020, Korea, Inivted talk (online)

191. Beomjoon Kim: Integrated Micro/nano Mechatronic systems between France CNRS and Japan UTokyo(도쿄대학과 프랑스CNRS와의 25년 마이크로메카트로닉스 이분야 국제공동연구의 결실), 2020 KIChE Japan Region Launching Symposium, 2020 KIChE Fall Meeeting International Symposium (e-conference), Oct. 14-16, 2020 (Oct.15^th.), Keynote lecture.

190. Gwenaël Bonfante, Hakjae Lee, Leilei Bao, Nobuyuki Takama, Beomjoon Kim: PLGA Porous Microneedles for Interstitial Fluid Collection Aimed for Continuous Glucose Sensing, The 24^th International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS 2020), On Line, pp. 583-584, W5-531C, October 4-9, 2020 (10/7, poster)

2019

189. A. Samaru, M. Su, B.J. Kim: Hybrid membrane consisting of Carbon Nanotubes and Polymer for sensitive and compact humidity sensor, The 19^th. International Conference on Micro and Nanotechnology for Power Generation and Energy conversion applications (Power MEMS 2019), Technical Digest book, p4-7, Krakow, Poland, 2-6 December, 2019(C2C Acknow, poster)

188. A. Samaru, M. Su, B.J. Kim: Hybrid membrane consisting of Carbon Nanotubes and Polymer for sensitive and compact humidity sensor, The 19^th. International Conference on Micro and Nanotechnology for Power Generation and Energy conversion applications (PowerMEMS 2019), Technical Digest book, p4-7, Krakow, Poland, 2-6 December, 2019(C2C Acknow, poster)
187. LeiLei Bao, Nobuyuki Takama, Beomjoon Kim: A Fabrication of whole-dissolvable microneedles patch in larger area for transdermal drug delivery, IEEE CPMT Symposium Japan 2019 (ICSJ 2019), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2019 (DOI: 10.1109/ICSJ47124.2019.8998676), pp. 35-38, November 18-20, 2019 (oral) (C2C Acknow)
186. Xiaobin Wu, Nobuyuki Takama, and Beomjoon Kim: A biodegradable microneedles – trapezoidal micropatterned patch in the LED therapy, IEEE CPMT Symposium Japan 2019 (ICSJ 2019), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2019 (DOI: 10.1109/ICSJ47124.2019.8998629), pp.123-126, November 18-20, 2019 (oral) (C2C Acknow) (Best paper Awarded)
185. Hakjae Lee, Kai Takeuchi, Yui Sasaki, Nobuyuki Takama, Tsuyoshi Minami, and Beomjoon Kim: Porous microneedle integrated in paper based glucose sensor for fluid channel interface, IEEE CPMT Symposium Japan 2019 (ICSJ 2019), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2019 (DOI: 10.1109/ICSJ47124.2019.8998695), pp.39-42, November 18-20, 2019 (oral) (C2C Acknow)
184. Hakjae Lee, Kai Takeuchi, Yui Sasaki, Nobuyuki Takama, Tsuyoshi Minami, and Beomjoon Kim: Capillary driven porous PDMS microneedle for naked-eye glucose sensor, The 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS 2019), Basel, Switzerland, Proceedings of µTAS 2019, pp. 654-656, 27 – 31 October 2019 (C2C Acknow)
183. Libo Wu, Nobuyuki Takama, and Beomjoon Kim: Fabrication Methodology for Personalised Biodegradable Microneedle Array, The 45^th. International Conference on Micro and Nano Engineering (MNE2019), Rhodes Greece, Abstract book, B6-4, September 23^rd.-26^th., 2019 (9/25 oral)
182. Hakjae Lee, Nobuyuki Takama, and Beomjoon Kim: Porous microneedles on paper substrate for rapid diagnosis of extracted ISF from human epidermis, The 10th Japan-China-Korea Joint Conference on MEMS/NEMS (JCK MEMS/NEMS 2019), Asahikawa, Japan, Abstract book pp. 66-67, July 16-18, 2019 (oral)
181. Kai Takeuchi, and Beomjoon Kim: Dissoluble Microneedle patch for transdermal medical applications – DDS and painless health monitoring, The 14^th. Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2019), FrA2.2 No. 29, pp. 48, Bangkok, Thailand, April 11-14, 2019 (oral/invited)
180. Meng Su, Juergen Brugger, and Beomjoon Kim: Novel wearable triboelectric generator based on a hybrid mix of carbon nanotube and natural polymer, The 32^nd. IEEE International Conference on Micro Electro Mechanical Systems2019 (MEMS 2018), Open poster list, OP-056, Coex, Seoul, Korea, January 28-31, 2019 (poster presentation, 1/30)

2018

179. Yasuhisa Morishita, Kai Takeuchi, Nobuyuki Takama, and Beomjoon Kim: Fabrication of biodegradable porous microneedles of PLGA, IEEE EMBS Micro and Nanotechnology in Medicine Conference 2018 (MNMC 2018), Abstract prorram pp. 36, Grand Hyatt Kauai, Hawaii, USA, December 10-14, 2018 (12/10-11, poster presentation)
178. Kai Takeuchi, Nobuyuki Takama, Kirti Sharma, Patrick Ruther, Oliver Paul, and Beomjoon Kim: Porous microneedles supported by Hyaluronic Acid for ISF collection, IEEE EMBS Micro and Nanotechnology in Medicine Conference 2018 (MNMC 2018), Abstract program pp. 29, Grand Hyatt Kauai, Hawaii, USA, December 10-14, 2018 (12/10-11, poster presentation)<
177. Meng Su, Juergen Brugger, and Beomjoon Kim: Wearable triboelectric generator based on a hybrid mix of carbon nanotube and polymer layers, The 18th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS 2018), Proceedings of Power MEMS 2018, F7A-02 (5 pages), Hilton Daytona Beach Oceanfront Resort, Daytona Beach, FL, USA, December 4-7, 2018 (oral presentation)
176. Junichiro Kono, Nobuyuki Takama, and Beomjoon Kim: Fabrication of painless optical microneedle array for laser therapy, International conference on Energy and Sustainability (ICES 2018), Proceeding ICES 2018, pp. 54, Global convention Plaza, Seoul National University, Korea, October 17-19, 2018 (oral presentation, 10/18, ackn K29-144)
175. Meng Su, Juergen Brugger, and Beomjoon Kim: Biodegradable single-layer based triboelectric power source for wearable electronics, International conference on Energy and Sustainability (ICES 2018), Proceeding ICES 2018, pp. 53, Global convention Plaza, Seoul National University, Korea, October 17-19, 2018 (oral presentation. 10/18, Best Presentation Awarded, “Outstanding Presentation Award”)
174. Beomjoon Kim: Dissoluble Microneedle Patch for Transdermal DDS and Painless Health Monitoring, International conference on Energy and Sustainability (ICES 2018), Proceeding ICES 2018, pp. 46, Global convention Plaza, Seoul National University, Korea, October 17-19, 2018 (10/18, invited talk)
173. Y. Morishita, K. Takeuchi, N. Takama, and B.J. Kim: Fabrication of porous biodegradable microneedles for glucose monitoring sensor, IEEE CPMT Symposium Japan 2018 (ICSJ 2018), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2018 (DOI: 10.1109/ICSJ.2018.8602802), pp. 81-84, November 19-21, 2018 (11/19 oral)
172. Kaifeng Luo, Yutaka Maruoka, Rie Kinoshita, Teru Okitsu, Libo Wu, Nobuyuki Takama, Beomjoon Kim: Modeling of stomatitis in rats and novel treatment using microneedles-based patch, IEEE CPMT Symposium Japan 2018 (ICSJ 2018), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2018 (DOI: 10.1109/ICSJ.2018.8602776), pp. 133-134, November 19-21, 2018 (ECR-07, poster presentation, 11/20)
171. Kai Takeuchi, Nobuyuki Takama, Beomjoon Kim, Kirti Sharma, Patrick Ruther, and Oliver Paul: A porous microneedle array connected to microfluidic system for ISF collection, IEEE CPMT Symposium Japan 2018 (ICSJ 2018), Kyoto Univ. Clock Tower Centennial Hall, Japan, Proceeding of ICSJ 2018, pp. 85-88, November 19-21, 2018 (11/19 oral presentation)
170. Libo Wu, Anthony W. Coleman, and Beomjoon Kim: Investigation on 3D printing assisted methodology for microneedle fabrication, The 5^th. International Conference on Microneedles (Microneedles 2018), Abstract book pp. 64, the University of British Columbia in Vancouver, Canada, May 29-June 1, 2018 (5/30, poster presentation)
169. Kai Takeuchi, Beomjoon Kim, Kirti Sharma, Patrick Ruther, and Oliver Paul: Microfluidic chip for glucose monitoring with biodegradable microneedles, The 5^th. International Conference on Microneedles (Microneedles 2018), Abstract book pp. 101, the University of British Columbia in Vancouver, Canada, May 29-June 1, 2018 (5/31. Poster presentation)
168. Kaifeng Luo, Yutaka Maruoka, Rie Kinoshita, Teru Okitsu, Libo Wu, Nobuyuki Takama, Beomjoon Kim: Study on the use of dissolvable microneedles in the treatment of stomatitis, The International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM 2018), abstract book OP094, Sapporo Convention Center, Sapporo, Japan, 3-7 July, 2018
167. Hakjae Lee, Dai Kobayashi, Nobuyuki Takama, Beomjoon Kim: Enhancement of electric power from new Liquid media-based TEG device, The International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM 2018), abstract book OP035, Sapporo Convention Center, Sapporo, Japan, 3-7 July, 2018 (Best paper Awarded)
166. Nobuyuki Takama, Youngchae Kim, Rie Kinoshita, and Beomjoon Kim: Novel Fabrication of Dissolving Micro-needles Patch Using PDMS Stamp for Drug Delivery System, Nano Korea 2018 Symposium (the 16^th. International Nanotech Symposium & Nano-Convergence Exhibition), TS03, program book pp.64 [I1803_0032], KINTEX, Ilsan, Korea, July 11-13, 2018 (invited talk, 7/11)
165. Beomjoon Kim: 3D printing-assisted fabrication of dissoluble microneedles for DDS, Joint Forum on Emerging Nano/Bio Technilogy and its Perspectives in Big Data Era (the 2^nd. Super-global network on “Seoul National Univ./IIS The Univ. of Tokyo”, Strategic Partnership Program), An 404, IIS, The University of Tokyo, 27^th. February 2018.

2017

164. Jongho Park, Beomjoon Kim, Yasuko Yanagida, Takeshi Hatsuzawa: Localized porous silicon structure by patterned illumination using shadow masks, The 2^nd. International Symposium on Biomedical Engineering, Laboratory for Future Interdisciplinary Research of Science and Technology (FIRST), Institute of Innovative Research (IIR), Tokyo Institute of Technology, 9-10, November, 2017 (poster presentation)

163. Meng Su, Masahiro Hibi, and Beomjoon Kim: High-Performance Hybrid power Generator based on Low Frequency Stochastic Resonance, The 7^th. International conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2017), IVT-002, COEX, Seoul, Korea, 14-17. Nov., 2017 (11/15, Invited talk)

162. Masahiro Hibi, Nobuyuki Takama, and Beomjoon Kim: Wireless sensor network using low frequency vibration energy harvester on the basis of stochastic resonance, Nano Korea 2017, KINTEX, Korea, TS05-08, July 12-14, 2017 (oral, 7/14)

161. Meng Su, Beomjoon Kim: High-performance hybrid power generator based on low frequency stochastic resonance, Nano Korea 2017, JTS05, KINTEX, Korea, July 12-14, 2017 (invited talk, 7/13)
160. Beomjoon Kim: Dissoluble Microneedle patch for transdermal drug delivery systems, Microsystems and Nanoengineering Summit 2017, Dalian, China, July 10-13, 2017 (invited talk)
159. Meng Su and Beomjoon Kim: High-Performance Hybrid Generator based on Low Frequency Stochastic Resonance, The 12^th. Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems 2017, (IEEE-NEMS 2017), UCLA Meyer & Renee Luskin Conference Center, Los Angeles, California, USA, April 9-12, 2017
158. Libo Wu, Nobuyuki Takama, Jongho Park, Jung Dong Kim, Do Hyeon Jeong, and Beomjoon Kim: Shadow mask assisted droplet-born air blowing method for fabrication of dissoluble microneedles, The 12^th. Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems 2017, (IEEE-NEMS 2017), UCLA Meyer & Renee Luskin Conference Center, Los Angeles, California, USA, April 9-12, 2017 (oral presentation)
157. Beomjoon Kim: Energy harvesting Power MEMS device for future IoT and sensor networks, International Seminar LIMMS, FEMTO-ST and Partners, 21^st.-22^nd. February 2017, Besancon, France (2/22 oral presentation)
156. Beomjoon Kim: Low-frequency vibration energy harvester for sensor network using stochastic resonance, The 1^st. Super-global network on “Seoul National Univ.(SNU) / IIS, The Univ. of Tokyo” Joint Symposium on Nano and Micro Systems, An 301-302, IIS, The University of Tokyo, Feb.13., 2017

2016

155-13. Beomjoon Kim: Dissoluble micro needle patch for transdermal drug delivery systems, Workshop on International research leading to innovation and new technology briding academics and societal demands, abstract book, pp.12, Institute of Industrial Science, The University of Tokyo, December 12^th., 2016
154-12. Beomjoon Kim: Revolution of transdermal drug delivery by dissoluble micro needles, International Symposium on Advanced Manufacturing science for Future systems “biomimetics”, Faculty Engineering building No. 2, The Univiersity of Tokyo, Tokyo, 5^th. December, 2016 (invited talk)
153-11. Libo Wu, Nobuyuki Takama, Jongho Park, Jung Dong Kim, Do Hyeon Jeong, and Beomjoon Kim: A Novel Fabrication of Dissoluble Microneedle Patch for Transdermal Drug Delivery, The second Korea-Japan Microneedle Symposium 2016, HJ convention center, Seoul, Korea, 1.Nov., 2016 (invited talk)
152-10. Beomjoon Kim: Energy harvest-Power MEMS devices for wearable bio sensors and new transdermal drug delivery systems, KAIST Bio-IT Healthcare Initiative International Workshop Series, NanoBio: Implantable and Wearbale, Dept. of Bio and Brain Engineeing, KAIST, KAIST CMS Bd. (E16), Dream Hall, 28, September, 2016 (invited talk)
151-9. Nobuhiko Amagata, Ryohei Ueno, Kanako Komaki-Yasuda, Kazuhiko Yano, Shigeyuki Kano, and Beomjoon Kim: Low-cost, Hydrodynamic single cell trapping device for Malaria detection, The 7th Japan-China-Korea Joint Conference on MEMS/NEMS 2016 (JCK MEMS/NEMS 2016), pp. 89-90, 21-23, September 2016, Sapporo, Japan (poster)
150-8. Xu Wang, Nobuyuki Tamaka, Jongho Park, Jung Dong Kim, Do Hyeon Jeong, Beomjoon Kim: A Cost-Efficient Fabrication Method of Dissolvable Micro-needle for Drug Delivery, 42^nd. Micro and Nano Engineering (MNE2016), Vienna, Austria, A4-1-1, September 19-23, 2016 (Oral presentation)
149-7. Libo Wu, Nobuyuki Takama, Jongho Park, Jung Dong Kim, Do Hyeon Jeong, and Beomjoon Kim: A Novel Fabrication of Dissoluble Microneedle Patch for Transdermal Drug Delivery, 42^nd. Micro and Nano Engineering (MNE2016), Vienna, Austria, Thu-A8-66, September 19-23, 2016 (poster)
148-6. Meng Su, and Beomjoon Kim: Energy Harvest-Power MEMS devices for Future Sensor Network Society-Stochastic resonance meets TENG device, IEEE CPMT Symposium Japan 2016 (IEEE Components Packaging and Manufacturing Technology Society, ICSJ 2016), Kyoto Univ. Clock Tower Centennial Hall, November 7-9, 2016 (11/8, invited talk), IEEE#CFP16PWJ-PRT ISBN # 978-1-5090-2036-2, pp.73-75
147-5. Xiaosheng Zhang, Juergen Brugger, and Beomjoon Kim: Penciling a Triboelectric Power on a Paper – Energy Harvest MEMS for a sensor networks, ISGMA 2016 (International Symposium on Green Manufacturing and Applications 2016), June 21-25, Bali Nusa Dua convention center, Indonesia, 2016 (Keynote speaker)
146-4. Yasuhiro Yukawa, Beomjoon Kim, and Yukiko T. Matsungaga: Fabrication of In Vitro Branched-shape microvasculature model, The 8^th. International Conference on Microtechnologies in Medicine and Biology (MMB 2016), Proc. of MMB 2016, pp. 147-148, Seoul National University, Seoul, Korea, April 20 to 22, 2016 (TP1-19, poster)
145-3. Nobuhiko Amagata, Shin-ichi Yuhki, Ryohei Ueno, Kanako Komaki-Yasuda, Kazuhiko Yano, Shigeyuki Kano, and Beomjoon Kim: Simple and low-cost cell trap microfluidic device for detection of Malaria, The 8^th. International Conference on Microtechnologies in Medicine and Biology (MMB 2016), Proc. of MMB 2016, pp. 165-166, Seoul National University, Seoul, Korea, April 20 to 22, 2016 (TP1-29, poster)
144-2. X. Zhang, J. Brugger, and B. Kim: Penciling a Triboelectric Power source on Paper, The 29th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2016), M-232, Proc. Of IEEE-MEMS 2016, pp. , Shanghai International Convention Center, Shanghai, China, 24-28, Jan., 2016 (poster)
143-1. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle (ナノバイオ医療の融合技術の未来展望), 2016 UT 韓日交流国際フォーラム, Abstract book, pp. 2-4, Seoul, Korea, 22 Jan., 2016 (invited speaker)

2015

142-13. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle (Trillion Sensor Universe in Japan), The 4^th. Nano-imprint-Molding-Print Forum (nano-IMP 2015) 2015, Abstract book, pp. 2-3, Seoul, Korea, 11. Feb., 2015 (keynote speaker)
141-12. Yannick Tauran, Anthony W. Coleman FRSC, and Beomjoon Kim: NEMS meets Bio/molecular engineering, Calix[n]arenes for biological applications; there’re plenty of things to do in the middle, The 13th International Nanotech Symposium & Nano-Convergence Expo, NANO KOREA 2015, COEX, Seoul, Korea, July 1-3, 2015 (invited talk)
140-11. Yasuhiro Yukawa, Toshiro Ohashi, Beomjoon Kim, and Yukiko T. Matsunaga: Microscopic and Macroscopic invetigation of in-vitro 3D-microvascular models under shear stress, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, MoB-1-2, (2 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (Oral)
139-10. Ryohei Ueno, Ikjoo Byun, Yuki Mizuno, and Beomjoon Kim: Fabrication of Embedded gold micro electrode with PIin PDMS substrate using modified dry peel-off process, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, MoP-23, (3 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (poster)
138-9. Shin-ichi Yuhki, Filiz Yesilkoy, Ryohei Ueno, and Beomjoon Kim: Detection of Malaria using single cell trap microfluidic device with fast imaging, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, MoP-22, (3 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (poster)
137-8. Xiao-Sheng Zhang, Beomjoon Kim and Juergen Brugger: Future Power powering Future- High-performance Triboelectric Nanogenerator for wearable electronics, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, WeC-3-2, (3 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (oral)
136-7. Michitaka Kawano, Yunshun Zhang, Rencheng Zheng, Kimihiko Nakano, and Beomjoon Kim: Feasibility of energy harvesting using vertical Bi-stable cantilever with tip mass based on stochastic resonance, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, WeB-2-1, (3 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (oral)
135-6. Yuki Mizuno, Michitaka Kawano, Masaaki Ichiki, and Beomjoon Kim: Dry peel-off method of transfer PZT thin capacitor to flexible polymer using SAMs, 2015 JSME-IIP/ASME-ISPS Joint conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proc. of MIPE 2015, MoP-36, (3 pages), Kobe International Conference Center, Japan, June 14-17, 2015 (poster)
134-5. Yannick Tauran, Mehmet C. Tarhan, Nicolas Lafitte, Laurent Jalabert, Beomjoon Kim, Hiroyuki Fujita, Anthony W. Coleman, and Dominique Collard: Silicon Nano Tweezers combined to a Microfluidic device for Monitoring the mechanical effects of Metal cations on DNA, The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Micro TAS 2015), Proc. pp. 1882-1884 (W.540g), Gyeongju, Korea, 25-29, October, 2015 (poster)
133-4. Ryohei Ueno, Beomjoon Kim, Arnaud Brioude, and Anthony W. Coleman FRSC: Thermochromic inks as internal probes of thermal behaviour in micro-fluidic systems, The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Micro TAS 2015), Proc. pp. 1545-1547 (T.422f), Gyeongju, Korea, 25-29, October, 2015 (poster)
132-3. Michitaka Kawano, Yunshun Zhang, Rencheng Zheng, Kimihiko Nakano and Beomjoon Kim: Modelling and Fabrication of perpendicular bi-stable cantilever for vibrational energy harvesting grounded on stochastic resonance, 41^st. Micro and Nano Engineering 2015 (MNE 2015), Program Abstract book, Tue-C-p68, The Hague, The Netherlands, September 21-24, 2015 (22. Sept. poster)
131-2. Ryohei Ueno, Ikjoon Byun, Beomjoon Kim: Embedded gold micro heater in PDMS substrate using modified dry peel-off process, 41^st. Micro and Nano Engineering 2015 (MNE 2015), Program Abstract book, Wed-B-p1, The Hague, The Netherlands, September 21-24, 2015 (23. Sept. poster)
130-1. M Kawano, Y Zhang, R Zheng, K Nakano and B Kim: Design and Manufacturure of perpendicular Bi-stable cantilever for vibrational energy harvesting on the basis of stochastic resonance, The 15^th. International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2015), Program Abstract book, PA-41, Boston, U.S.A, December 1-4, 2015 (2.Dec. poster presentation)

2014

129-16. Yasuhiro Yukawa, Beomjoon Kim, Yukiko T. Matsunaga: In vitro tissue model on chip, Japan-Taiwan Bio-Electronics, Chingjing, 2014. 11. (oral present)
128-15. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, 2014 NAMIS Marathon workshop, National Tsing Hua University, Hsinchu, Taiwan, 19th. -21st. Dec., 2014 (invited lecture on 12/14. 2014)
127-14. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle (Trillion Sensor Universe in Japan), Tech-Biz Korea 2014, Seoul, Korea, 25. Nov., 2014 (Plenary talk)
126-13. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, The Univ of Tokyo and Seoul National University: Symposium on Nano/Bio Mechanical Engineering 2014, pp.10-11, SNU, 19.Nov., 2014 (invited talk)
125-12. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, The 1st. International conference and Exhibition for Nanopia, CECO, Changwon, Korea, 13-14. Nov., 2014 (invited talk)
124-11. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, Revolution of transdermal drug delivery system by using dissoluble microneedle patch, CNiT (Center for Nature-inspired Technology) Symposium, KAIST, Daejeon, Korea, 5. Nov., 2014 (invited talk)
123-10. Yasuhiro Yukawa, Beomjoon Kim, Yukiko T. Matsunaga: Fabrication of perfused culture system for functional microvasculature models, 2014 BMES Annual Meeting (Biomedical Engineering Society), San Antonio, Texas, USA, October 22-25, 2014(24. Oct. 2014, Exhibit Hall A poster presentation)
122-9. Ryohi Ueno, Filiz Yesilkoy, Juergen Brugger, Akiyoshi Taniguchi, Yasuyuki Sakai, and Beomjoon Kim: Localized expression of heat shock protein in cell population by micro heater device, The 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2014), M096, San Antonio, Texas, USA, October 26-30, 2014 (Monday 27. Oct. poster, C2C)
121-8. Ryohei Ueno, Filiz Yesilkoy, Juergen Brugger and Beomjoon Kim: Micro thermal flow rate sensor in minim range of detection with low heater temperature for bio-aaplications, 40th. Micro and Nano Engineering 2014 (MNE 2014), Program Abstract book, pp. 397, Lausanne, Switzerland, September 22-26, 2014 (25. Sept. poster)
120-7. Ikjoo Byun, Beomjoon Kim: Dry pattern transfer technique on polymeric substrates using surface modification by self-assembled monolayers, 40th. Micro and Nano Engineering 2014 (MNE 2014), Program Abstract book, pp. 359, Lausanne, Switzerland, September 22-26, 2014 (invited talk)
119-6. Jose Ordonez-Miranda, Laurent Tranchant, Beomjoon Kim, Yann Chalopin, Thomas Antoni, and Sebastian Volz: Heat Transport along Polar Nanofilms due to Surface Phonon-Polaritons, Procs. of the 15th. International Heat Transfer Conference, IHTC-15, IHTC 15-9664, Kyoto, Japan, August 10-15, 2014 (8/12 Seesion 21, oral Presentation)
118-5. R. Ueno, F. Yesilkoy, J. Brugger and B.J. Kim: Thermal analysis, design and fabrication of microfluidic device with local temperature controls, The 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2014), Proceedings 12-8, pp. 105, June 29-July 2, 2014, EXCO, Daegu, Korea (oral, July 1)
117-4. Anthony W. Coleman, Laurent Mollet, and Beomjoon Kim: Molecular Recognition in the Age of 3D Printers and Micro needle dispenser, 2014 Symposium CMOS Emerging Technologies Research (2014 CMOSETR), Abstract Book (ISBN:978-1-927500-45-3) pp. 33, Minatec, Grenoble, France, July 6-8, 2014(http://www.cmosetr.com/home_page.html)
116-3. M. Ichiki, K. Sueshige, Y. Amano, I. Byun, B.J. Kim and T. Suga: Nano-transfer Technology for the handling process of thin-film capacitor, The International Union of Materials Research Societies – International Conference on Electronic Materials 2014 (IUMRS-ICEM 2014), 10-14 June, Taipei, Taiwan, 2014
115-2. Jose Ordonez-Miranda, Laurent Tranchant, Beomjoon Kim, Thomas Antoni, Yann Chalopin, and Sebastian Volz: Heat Transport along Nanofilms and Nanowires due to Surface Phonon-Polaritons, E-MRS 2014 Spring Meeting, Symposium D, D.11-2, (Abstract ID: OZI2M), Lille, France, May 26-30, 2014 (oral Presentation)
114-1. Ikjoo Byun, Ryohei Ueno, and Beomjoon Kim: Fabrication of Micro-heaters embedded in PDMS using a dry peel-off process, The 27th International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2014), P0961, Hyatt Regency San Francisco, CA, USA, 26-30 January, 2014 (1/27 poster present)

2013

113-11. Beomjoon Kim: MEMS meets Bio-sensing-there’re plenty of things to do in the middle, 7th. International NAMIS autumn school “Bio-inspired MEMS/NEMS”, Seoul National University, Korea, 5. September 2013 (invited)
112-10. Amano Yuki, Ichiki Masaaki, and Kim Beomjoon: Fabrication of High Dielectric Constant Capacitors Embedded in Flexible Polymer by Dry Peel-Off Process, 2013 MRS Fall Meeting & Exhibit, program & exhibit guide pp. 211, December 1-6, Boston, 2013 (3. December, poster, M5.72)
111-9. Ikjoo Byun, Anthony W. Coleman, Masaaki Ichiki, and Beomjoon Kim: Transfer of thin film copper micro-electrodes to flexible PDMS, The 4th Japan-China-Korea Joint Conference on MEMS/NEMS (JCK MEMS/NEMS 2013), Abstract book O-07, Tohoku University, Sendai, Japan, August 22 – 24, 2013 (8/23, Oral)
110-8. Yuki Amano, Ikjoo Byun, Masaaki Ichiki, and Beomjoon Kim: Fabrication of high dielectric constant capacitors embedded in flexible polymer by molecular glue, The 4th Japan-China-Korea Joint Conference on MEMS/NEMS (JCK MEMS/NEMS 2013), Abstract book P-09, Tohoku University, Sendai, Japan, August 22 – 24, 2013 (8/23, poster)
109-7. Ikjoo Byun, Ryohei Ueno, and Beomjoon Kim: Reliable fabrication of stable Au micro-electrodes embedded in poly(dimethylsiloxane) and model applications to micro-heaters, The 39th International Conference on Micro and Nano Engineering (MNE 2013), P-Fab-83, Book of abstract, pp. 327, Imperial College London, 16-19 September, 2013
108-6. Ikjoo Byun and Beomjoon Kim: Fabrication of 3D polydimethylsiloxane microstructures on Si substrate by selective bonding and cohesive mechanical failure, The 39th International Conference on Micro and Nano Engineering (MNE 2013), P-Fab-18, Book of abstract, pp. 262, Imperial College London, 16-19 September, 2013
107-5. Ikjoo Byun, Anthony W. Coleman, and Bemjoon Kim: Microcontact printing with a flat metal-embedded stamp, NANO KOREA 2013 Symposium (the 11th International Nanotech Symposium & Nano-Convergence Expo), O1304-011 Abstract book, COEX, Seoul, Korea, July 10-12, 2013 (7/11, oral)
106-4. Yannick Tauran, Ryohei Ueno, Beomjoon Kim and Anthony W. Coleman: Para-sulphonato-calix[4]arene capped silver nanoparticles as complexing agents of Dopamine and Epinephrine, ICNT 2013 (Third Euro-India International Conference on Nanomedicine and Tissue Engineering 2013), August 9-11, Kottayam, India, 2013 (poster)
105-3. Beomjoon Kim: NMEMS meets Bio/molecular sensing, 2013 Symposium CMOS Emerging Technologies Research (2013 CMOSET), Book of Abstracts, pp. 16, Hilton Whistler Resort and Spa, Whistler, BC Canada, July 17-19, 2013 (invited talk, http://www.cmosetr.com/home_page.html)
104-2. Jose Ordonez-Miranda, Laurent Tranchant, Takuro Tokunaga, Beomjoon Kim, Thomas Antoni, Yann Chalopin, Sebastian Volz: Thermal Conductivity Enhancement of Amorphous Nano-sized Thin Films and Tubes Due to Surface Phonon-polariton, 2013 MRS Spring Meeting & Exhibit, April 1-5, California, 2013 (4. April, poster presentation, II9.21)
103-1. Beomjoon Kim: SAM meets NMEMS, NMEMS for Bio-sensing, 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST 2013), Book of Abstract, pp. 56, Berlin, 21 – 24 April, 2013 (23, April, invited talk)

2012

102-18. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, The 5th. IEEE International Nanoelectronics Conference (IEEE INEC 2013), Abstract book pp. 54, Proceeding of 2013 IEEE 5th. International Nanoelectronics conference (INEC 2013), DOI: 10.1109/INEC.2013.6466033, pp. 313-315, Singapore, 2-4. January 2013 (invited)
101-17. Beomjoon Kim: NEMS meets Bio-sensing; there’re plenty of things to do in the middle, 2012 IEEE Nanotechnology Material and Devices Conference (IEEE-NMDC 2012), October 16-19, 2012, Waikiki Beach, Hawaii, USA, abstract book pp. 22, 2012 (invited)
100-16. Beomjoon Kim: NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, The Bio & Health symposium of the 2012 Korean-ethnic Scientists and Engineers Academic conference, (Bio/Bioengineering & Health session), abstract book KOFST p. 71-73, 4-6. July, KOEX, Seoul, Korea, 2012 (invited) (http://www.sciencetimes.co.kr/article.do?todo=view&atidx=0000063875)
99-15. M. Ichiki, S. Makino, and B.J. Kim: Fabrication of the High Density Capacitors for the Embedded Substrate using the Hydrophobic and Hydrophilic Properties of SAM, The 25th. International Microprocesses and Nanotechnology Conference (MNC 2012), Kobe Meriken Park Oriental Hotel, Kobe, Japan, October 30-November 2, 2012 (2P-11-49, poster)
98-14. Laurent Tranchant, Takuro Tokunaga, Beomjoon Kim, Sebastian Volz: Dispersion Relation of a Surface Phonon Polariton Propagating in a Cylindrical Micrometric Glass Waveguide, The Third International Forum on Heat Transfer (IFHT2012), Poster No. 164, Nagasaki, November 13-15, 2012
97-13. Maurizio R. Gullo, Ryohei Ueno, Yuan Pang, Nobuyuki Takama, Yasuyuki Sakai, Beomjoon Kim and Jürgen Brugger: Towards Single cell level heat shock protein expression by means of hydrodynamic trapping and local heating, MFHS-2012 conference (1st. International conference on MicroFluidic Handling Systems), Enschede, The Netherlands, pp. 174-177, 10-12 Oct., 2012 (poster, BEST poster awarded)
96-12. Oya Koc, Mehmet C. Tarhan, Yslam Orazov, Hiroyuki Fujita and Beomjoon Kim: Utilizing PDMS stamping for mass production of microtubule functionalized detection devices, The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2012), Proceedings of MicroTAS 2012, pp. 1864-1866,Okinawa, Japan, 0ct. 28-Nov.1, 2012 (poster)
95-11. Beomjoon Kim and Kyungduck Park: New nanofluidic device to achieve a length dependent mobility of long DNA molecules and a separation, The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2012), Proceedings of MicroTAS 2012, pp. 1750-1752, Okinawa, Japan, 0ct. 28-Nov.1, 2012 (poster)
94-10. Yannick Tauran, Momoko Kumemura, Nicolas Lafitte, Ryohei Ueno, Laurent Jalabert, Yuki Takayama, Dominique Collard, Hiroyuki Fujita, Anthony W. Coleman, and Beomjoon Kim: Mechanical effect of Calix[n]arene capped silver nanoparticles on DNA measured with silicon nano tweezers, The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2012), Proceedings of MicroTAS 2012, pp. 1882-1884, Okinawa, Japan, 0ct. 28-Nov.1, 2012 (poster)
93-9. Ryohei Ueno, Yuka Ogata, Nobuyuki Takama, Yasuyuki Sakai, Beomjoon Kim: Microfluidic system with fast, local temperature control to study celluar response in microenvironmental stimuli, RSC (Royal Society of Chemistry) Tokyo International Conference, – Micro/Nano Technologies for Analysis of Human Health and Diagnostics -International Session, (JASIS Conference), Makuhari Messe, Chiba, September 6-7, A084, p-42, 2012 (poster)
92-8. Beomjoon Kim, Kyungduck Park, Akihide Hibara: Pressure driven nanoslit device to achieve length-dependent separation of long DNA molecules, RSC (Royal Society of Chemistry) Tokyo International Conference, – Micro/Nano Technologies for Analysis of Human Health and Diagnostics -International Session, (JASIS Conference), Makuhari Messe, Chiba, September 6-7, A042, p-21, 2012 (poster)
91-7. Ikjoo Byun, Beomjoon Kim, and Hiroyo Segawa: Highly Ordered Laminated Nanoporous Alumina by AC Anodization, The 6th International Conference on the Science and Technology for Advanced Ceramics (STAC-6), June 26 – 28, 2012, 1P-G-P72, Yokohama, Japan, 2012 (poster)
90-6. Ikjoo Byun, Jongho Park and Beomjoon Kim: Microcontact printing using flexible flat PDMS stamps with metal embedment, 2012 IEEE Nanotechnology Material and Devices Conference (IEEE-NMDC 2012), October 16-19, 2012, Waikiki Beach, Hawaii, USA, abstract book pp.14, Proceedings of IEEE NMDC 2012, pp. 30-33, 2012 (oral present)
89-5. Takuro Tokunaga, Ikjoo Byun, Nobuyuki Takama, Sebastian Volz and Beomjoon Kim: Experimental Study of Heat Transfer in Micro Glass Tubes Mediated by Surface Phonon Polaritons, 6th European Thermal Sciences Conference (Eurotherm 2012), 4-7, September, 2012, Poitiers, France, Book of Abstracts, pp. 182, 2012 (poster, kaken acq)
88-4. Laurent Tranchant, Takuro Tokunaga, Beomjoon Kim, Nobuyuki Takama, Yann Chalopin, Sebastian Volz: Surface Phonon Polariton Mediated thermal conduction of a micrometric glass waveguide, 6th European Thermal Sciences Conference (Eurotherm 2012), 4-7, September, 2012, Poitiers, France, Book of Abstracts, pp. 155, 2012 (oral presentation, kaken acq)
87-3. Jongho Park, Nobuyuki Takama, Hiroyuki Fujita and Beomjoon Kim: Fabrication of 3D Micro Structures on Nonplanar Substrates and Its Applications for Roll Micro-Contact Printing, 2012 MRS Spring Meeting & Exhibit, April 9-13, California, 2012 (11.April, oral presentation/1272128, K4.2)
86-2. Sebastian Volz, Takuro Tokunaga, Nobuyuki Takama, and Beomjoon Kim: Novel investigation of thermal nanostructures for guided surface phonon polaritons, 2012 MRS Spring Meeting & Exhibit, April 9-13, California, 2012 (10.April, oral presentation/1271873, JJ1.8)
85-1. Kyungduck Park, Beomjoon Kim: Size-dependent electrophoretic behavior of long DNA molecules under pressure gradient in nanoslit, 2012 MRS Spring Meeting & Exhibit, April 9-13, California, 2012 (10.April, oral presentation/1269295, NN3.4)

2011

84-10. Jongho Park, Sho Makino, Hiroyuki Fujita, and Beomjoon Kim: Roll-to-roll microcontact printing using PDMS roller stamp fabricated by novel mold/casting method, The 1^st. Nano Imprint Molding Print Forum (n-IMP 2012), Proceeding Book, pp. 67-68, Jeju, Korea, 24-25. Feb. 2012 (poster, KIMM acqk)
83-9. Sho Makino, Jongho Park, Nobuyuki Takama, Beomjoon Kim: Roll to Roll microcontact printing with roller stamp fabricated by optical soft lithography, IEEE-NEMS 2012 (The IEEE International Conference on Nano/Micro Engineered and Molecular Systems 2012), pp.648-649, March 5-8, Kyoto, Japan, 2012 (T4B-6L, 6. March, oral presentation, KIMM acq)
82-8. Yannick Tauran, Ryohei Ueno, Anthony W. Coleman and Beomjoon Kim: Temperature effects on calixarene capped silver nanoparticle sensing of nucleotides, IEEE-NEMS 2012 (The IEEE International Conference on Nano/Micro Engineered and Molecular Systems 2012), pp. 648-649, March 5-8, Kyoto, Japan, 2012 (Th3D-3L, 8. March, oral presentation)
81-7. T. Tokunaga, I. Byun, P. Ginet, N. Takama, S. Volz, and B.J. Kim: Thermal conductivity of Tapered Micro Glass Tubes in Vacuum condition, 2012 International Conference on Electronics, Information and Communication (ICEIC 2012), Proceeding ICEIC 2012 CD, pp. 120-121, February 1-3, 2012, The High1 Resort, Jeongseon, Korea, 2012 (oral, Feb.2.)
80-6. Beomjoon KIM: Single-Cell heat-shock protein synthesis triggered by micro/nano wire heaters, 2011 Asia Micro Mechatronics Forum, The Daegu Mechatronics Materials Institute (DMI), Daegu, Korea, 25-Oct. 2011 (invited talk) (http://www.dmi.re.kr/2011_mechaforum.htm 韓国毎日新聞 2011年10月24日記事)
79-5. G Tortissier, P. Ginet, B. Kim, H. Fujita, H. Toshiyoshi: Enhanced CF4 Plasma Treated Polymer Film for Flexible Display Application, IEEE International Conference on Optical MEMS and Nanophotonics, Aug. 8-11, 2011, Istanbul, Turkey, 2011
78-4. Jongho Park, Hiroyuki Fujita, and Beomjoon Kim: Micro patterning on nonplanar substrates using unconventional photolithographic technique with flexible photomask, 24th International Microprocesses and Nanotechnology Conference (MNC 2011), 26P-7-3, October 24-27, 2011, ANA Hotel Kyoto, Kyoto, Japan (poster)
77-3. Ikjoo Byun, Jongho Park, Joonwon Kim and Beomjoon Kim: Fabrication of PDMS Nano Stamp and Si Nano Mold with Superhydrophobic Surfaces by Various Nano Structures, The 4th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2011), pp.76 (abstract book) Hongkong, 16-18, Nov., 2011 (poster)
76-2. Jongho Park, Nobuyuki Takama, and Beomjoon Kim: 3D Micro patterning on a concave substrate for the replica of PDMS cylindrical stamp, The 37^th. International Conference on Micro & Nano Engineering (MNE 2011), Program Guide abstract book, pp. 412, Berlin, Germany, 19 – 23 September 2011 (oral presentation)
75-1. Ryohei Ueno, Patrick Ginet, Kenta Yamada, Kevin Montagne, Yasuyuki Sakai, Dominique Fourmy, Teruo Fujii, Sebastian Volz and Beomjoon Kim: Fast local heating with Nano/micro wires for single cell heat shock response, AsiaSense 2011, The 5th International Conference on Sensors, TuD1-3, 23-26.Oct. 2011, Jeju, Korea (Oral present)

2010

74. Kenta Yamada, Patrick Ginet, Sebastian Volz, Kevin Montagne, Yasuyuki Sakai, Dominique Fourmy, Ali Rajabpour and Beomjoon Kim: Gold microheater for investigation of thermo-mechanism of heat shock proteins in a single cell, The 36th. International Conference on Micro & Nano Engineering (MNE 2010), Program Guide abstract book, pp.43, O-LIFE-21, Genoa, Italy, 19-22 September 2010
73. Patrick Ginet, Kevin Montagne, Sho Akiyama, Yasuyuki Sakai, Teruo Fujii, Dominique Fourmy, Sebastian Volz and Beomjoon Kim: Heat-Shock Protein synthesis in animal cells induced by gold microheaters, The 14th. International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS 2010), pp. 977-979, Groningen, The Netherlands, 3-7 October 2010. (poster presentation)
72. J.H. Park, H. Fujita, and B.J. Kim: Fabrication of high aspect ratio metallic structure on the curved substrate using flexible mask and copper electroplating, The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2010), FT9 Technical Digest, pp. 61, (Oral present, on 7th. July), Perth, Western Australia, July 6-9, 2010
71. K.D. Park, N. Takama, T. Fujii, H. Fujita and B.J. Kim: Entropic Trapping Migration of DNA Molecules in Silicon-based Nanofluidic Channels Fabricated by Shadow Evaporation and Wet Anisotropic Etching in KOH Solution, The 13th International Meeting on Chemical Sensors (IMCS-13), Technical Digest, pp. 319, Perth, Western Australia, July 11-14, 2010. (the Student Prize for best poster presentation at IMCS-13 (with AUD$500 prize))

2009

70. Jukyung Lee, Beomjoon Kim, Nobuyuki Takama, Hiromitus Gotoh, Naotake Mohri, and Takahisa Masuzawa: Study on the characteristics of peeling tool by Micro-Electrical Discharge Machining, ASPEN2009 (International Conference of Asian Society for Precision Engineering and Nanotechnology), 1C-7_2174p, Kitakyushu, Japan, 11. Nov. 2009 (Oral)
69. Jongho Park, Jacques Fataccioli, Nobuyuki Takama, Hiroyuki Fujita, and Beomjoon Kim: Localized Anodization of Aluminum for the Formation of High Aspect Ratio Aluminum/Alumina Patterns, ASPEN2009, 2P6-5p, 11. Nov. 2009 (poster)
68. Patrick Ginet, Akiyama Sho, Hiroyuki Fujita and Beomjoon Kim: Non conventional fabrication of field effect transistor silicon nanowire based biosensors, ASPEN2009, 2E-8_2021p, 12. Nov. 2009 (Oral)
67. C. Bottier, J. Fattaccioli, M.C. Tarhan, R. Yokokawa, B.J. Kim, D. Collard and H. Fujita: Kinesin-driven oil droplets used as carriers for transportation of solid particles, MicroTAS 2009, jeju, Korea, pp. 1521-1523, 2009 (poster)
66. K.D. Park, N. Takama, T. Fujii, H. Fujita and B.J. Kim: Fabrication of Zigzag-shaped nanochannels with shadow evaporation of photoresist pattern for study of DNA molecule behavior in the curved confinement, MicroTAS 2009, jeju, Korea, pp.842-844, 2009 (poster)
65. Y.H. Cho, J. Par, H. Park, X. Cheng, B.J. Kim, A. Han: Fabrication of High-Aspect-Ratio Nanochannels using Novel Nanoscale Silicon Mold and Solvent Assisted Sealing, Nanotech Conference & Expo 2009, May 3-7, 2009, Houston, Texas, TU81.215, 2009 (poster)
64.Y. H. Cho, H. S. Kim, B. J. Kim, and A. Han: Nanochannel Fabrication for Single DNA Analysis, The 26th Annual Houston Conference on Biomedical Engineering Research (HSEMB), 19-20 March 2009, Houston, Texas, 2009 (Oral)
63. J. Fattaccioli, A. Ikeda, J.G. Kim, N. Takama and B.J. Kim: Visual observation of PDMS tip in liquid microcontact printing, 22nd. IEEE International Conference on Micro Electro Mechanical Systems MEMS 2009, Sorrento, Italy, Proc. of the IEEE Int. Conf. on MEMS 2009, pp.681-684, 2009 (poster presentation)
62. S. Couderc, B.J. Kim, and T. Someya : Cellulose-based composite as a raw material for flexible and ultra-lightweight mechanical switch devices, 22nd. IEEE International Conference on Micro Electro Mechanical Systems MEMS 2009, Sorrento, Italy, Proc. of the IEEE Int. Conf. on MEMS 2009, pp.646-649, 2009 (poster presentation)
61. S. Akiyama, Y. T. Cheng, J. Fattaccioli, N. Takama, P. Löw, C. Bergaud and B. J. Kim: Surface-temperature control of silicon nanowires in dry and liquid conditions, 22nd. IEEE International Conference on Micro Electro Mechanical Systems MEMS 2009, Sorrento, Italy, Proc. of the IEEE Int. Conf. on MEMS 2009, pp.567-570, 2009 (poster presentation)

2008

60.Y.T. Cheng, J. Fattaccioli, S. Akiyama, N. Takama, Y. Akagi, S.J. Cho, P. Low, C. Bergaud, and B.J. Kim: Surface-temperature mapping on suspended silicon nanowire using fluorescent thermometry under dry and liquid conditions, 34th. International conference on Micro and Nano engineering 2008 (MNE2008), Athens, Greece, Abstract book, pp.127, 15-18 September, 2008 (oral presentation)
59. K.D. Park, J. H. Kim, S.W. Lee, N. Takama, T. Fujii, and B. J. Kim: Arbitrary shapes of nano spatial channels fabricated using Polymeric deformation for single biomolecule detection, 34th. International conference on Micro and Nano engineering 2008 (MNE2008),Athens, Greece, Abstract book, pp.324, 15-18 September, 2008
58. Y.T. Cheng, Y.H. Cho, N. Takama, and B.J. Kim: Simple fabrication of Si nanowire and its biological application as nanoscale heat source, MRS International Materials Research Conference, Chongqing, China, Abstract book, pp.170, June 9-12, 2008 (oral presentation)
57. J.G. Kim, N.Takama, B.J. Kim and H. Fujita: Optical-softlithographic technology for patterning on a curved surface, Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT2008), Tainan, Taiwan, Abstract book, pp.124, June 22-25, 2008 (Oral presentation)
56. Benjamin Samson, Elika Saidi, Lionel Aigouy, Peter Low, Beomjoon Kim, Christian Bergaud, Michel Mortier: Scanning thermal microscopy with a fluorescent nanoprobe, 2008 APS (American Physical Society) March Meeting, New Orieans, Louisiana, USA, March 10-14, V36.00011, 2008 (oral presentation)
55. C. Bottier, M.C. Tarhan, J. Fattaccioli, F.O. Morin, B.J. Kim and H. Fujita: Direct transportation and electrofusion of oil droplets in a microfluidic device, 21st. IEEE International Conference on Micro Electro Mechanical Systems MEMS 2008, Tucson, USA, Proc. of the IEEE Int. Conf. on MEMS 2008, pp. 563-566, 2008

2007

54. Y H Cho, S W Lee, M T Hwang, T Fujii and B J Kim: Fabrication of Silicon dioxide nanochannel arrays without nanolithography for single DNA detection, MNE2007 (33rd International Conference on Micro- and Nano-Engineering), Copenhagen, Denmark, 23-26.Sept.2007 (poster presentation), Abstract book pp.331-332, 2007
53. Peter Löw, Nobuyuki Takama, Beomjoon Kim and Christian Bergaud: High spatial resolution thermometry using fluorescent nanoprobes in dry and liquid media, 7th France-Japan Workshop on Nanosciences and Nanomaterials, Bischoffsheim, Strasbourg, France, 24-26, Oct. 2007 (poster presentation)
52. M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim: Nanochannels for Single DNA Analysis Using Various Fabrication Methods, Proc. of ISOCC2007 (International SoC Design conference), Seoul, Korea, 15-16.Oct. 2007, pp.347-350, 2007, (Best paper awarded)
51. B. Samson, L. Aigouy, G. Tessier, P. Low, B. Kim, C.Bergaud, M. Mortier: Thermal imaging of nickel wires with a fluorescent nanoprobe, 12th International Conference on Phonon Scattering in Condensed Matter (Phonons 2007), Paris, July 15-20, pp.173-174, 2007
50. Y.H. Cho, S.W. Lee, B.Le Pioufle, N. Takama, S. Takeuchi, T. Fujii and B.J. Kim: High-throughput single-cell electroporation microchip with three dimensional Si microelectrodes for gene transfection, The 14th. International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers ‘07 – Lyon), Lyon, France, 10-14, June, 2007, Digest of Technical papers, Vol. 1, pp. 939-942, 2007
49. Peter Löw, Nobuyuki Takama, Beomjoon Kim, and Christian Bergaud: Using dried Rhodamine B fluorescence for temperature characterization of sub-micron scale devices, The 14th. International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers ’07 – Lyon), Lyon, France, 10-14, June, 2007, Digest of Technical papers, Vol. 1, pp. 1055-1058, 2007

2006

48. Hak-Min Wang, Hyung-Man Kim, Nobuyuki Takama and Beomjoon Kim: Analysis of gas flow in Micro channels for high performance of Micro fuel Cell, 2nd International Conference on Cooling and heating Technologies, Dalian, China, 26-30 July, pp. 58-64, 2006
47. Janggil Kim, Nobuyuki Takama, and Beomjoon Kim: Patterning of micro metal electrodes onto the flexible 3-D polymer structures, The Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT2006), June 25-28, pp.294, 2006 (poster)
46. Janggil Kim, Nobuyuki Takama, and Beomjoon Kim: Fabrication of nano-structures in a large area through µCP using flat PDMS stamp, The Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT2006), June 25-28, pp.148, 2006 (oral)
45. Peter Low, Nobuyuki Takama, Beomjoon Kim, Christian Bergaud: Measurement of the temperature distribution on resistively heated nanowires using CdSe/ZnS nanocrystals, 2006 MRS (Materials Research Society) Fall meeting, Boston, USA, 27.Nov.- 1.Dec., 2006 (poster presentation, M3-1)
44. Jeroen Steen, Robert Kerkhofs, Vincent Blech, Juergen Brugger, and Beomjoon Kim: Novel full platinum nanoprobes suitable for biological SPM experiments, Proceedings of 2006 International Conference on Microtechnologies in Medicine and Biology (MMB2006), May 9-12, pp.288-291, 2006
43. Younghak Cho, Bruno Le Pioufle, Nobuyuki Takama, and Beomjoon Kim: A silicon-based single cell electroporation microchip for gene transfer, Proceedings of 2006 International Conference on Microtechnologies in Medicine and Biology (MMB2006), May 9-12, pp. 195-197, 2006
42. P. Low, B. le Pioufle, B.J. Kim, C. Bergaud: Electric field assembly of quantum dots on nanowires for temperature sensing, The 11th International Meeting on Chemical Sensor (IMCS11), June 16-19, Brescia, Italy, pp. 35, 2006

～2005

41. V. Blech, N. Takama and B.J. Kim: Single-step Sub-microscale Patterning of cm2-scale Surfaces, The 49th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN), May 31 – June 3, JW Marriott Orlando, Grande Lakes, Orlando, Florida, pp. 453-454, 2005
40. Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii and B.J. Kim: Characterization of Single Red Blood Cell using Twin Microcantilever Type Sensor Array, The 13th. International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers ’05 – Seoul), COEX, Seoul, Korea, 5-9. June, Digest of Technical papers, Vol.2, pp. 1692-1695, 2005
39. J.G. Kim, N. Takama, B.J. Kim: Novel Pattern Transfer Technique on Flexible Polymer Structure for Advanced Microfluidic Systems, The 13th. International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers ’05 – Seoul), COEX, Seoul, Korea, 5-9. June, Digest of Technical papers, Vol.2, pp. 1424-1428, 2005
38. Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii and B.J. Kim: MEMS-based Bio-chip for the Characterization of Single Red Blood Cell, The 3rd. Annual IEEE EMBS Special Topic Conference on Microtechnologies in Medicine and Biology, Turtle Bay resort, Oahu, Hawaii, 12-14. May, pp.60-63, 2005
37. A.K. Rissanen, S. Ostrovidov, E. Lennon, V. Senez, J. Kim, B. Kim, K. Sakai Furukawa, T. Ushida, Y. Sakai, and T. Fujii: Monitoring Capillary Endothelial Cell Culture and Capillary Formation in a Microdevice by Impedance Spectroscopy Measurements, The 3rd. Annual IEEE EMBS Special Topic Conference on Microtechnologies in Medicine and Biology, Turtle Bay resort, Oahu, Hawaii, 12-14. May, pp.201-204, 2005
36. Peter Löw, Nobuyuki Takama, Beomjoon Kim: Electrodeposition combined with Microjet Flow-Fabrication of Metal Microtubes, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2005), 24-28, July, Monterey, USA, pp. 546 – 550, 2005
35. N.Masuda, S.Sakakihara, H. Noji, and B.J. Kim: Direct Patterning of Active Proteins Using Micro Contact Printing, The First International Conference on Complex Medical Engineering-CME2005, Takamatsu, Japan, 15-18. May, pp.112-115, 2005
34. Joon-Wan Kim, Yutaka Yamagata, Beomjoon Kim and Toshiro Higuchi : Micro Patterning of Fluorescent Nanoparticles by Atomizers Combined with Electrostatic Deposition and Stencil Mask, 17th IEEE International Conference on Micro Electro Mechanical Systems MEMS 2004, Maastricht, The Netherlands, Proc. of the IEEE Int. Conf. on MEMS 2004, pp.625-628, 2004
33. Younghak Cho, Nobuyuki Takama, Hiroyuki Fujita, Beomjoon Kim: Twin microcantilever array for measurement of red blood cell deformability and electrical impedance, International Conference on Electrical Engineering (ICEE2004), Joint Conf. with Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT MNT 2004), Conference Proceedings, Vol. 3-1, pp. 263-266 July 4-8, 2004
32. Y.H. Cho, N. Takama, and B.J. Kim: A twin microcantilever array for measurement of red blood cell deformability and electrical impedance, The 10th International Meeting on Chemical Sensors (10-IMCS), Technical Digest of 10-IMCS, Chemical Sensors, Vol. 20 supplement B (2004), pp. 346-347, July 11-14, 2004, Tsukuba, Japan
31. Y.H. CHO, D. Collard, L. Buchaillot, B.Legand, and B.J. KIM: Characterization of individual bio-cells with thermally actuated probe arrays, Proceedings of Symposium of Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2004), 12-14, May, Montreux, Switzerlands, pp.425-429, 2004
30. Kenzo Karasaki, Janggil Kim, and Beomjoon Kim: Inkjet printing of Self-Assembled Monolayers, Proceedings of Symposium of Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2004), 12-14, May, Montreux, Switzerlands, pp.473-476, 2004
29. D. Grogg, M.A.F. v/d Boogaart, H. Kawakatsu, J. Brugger, BJ. Kim: Fabrication and characterization of metal nanolevers made by shadow mask technology, The 48th. International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN 2004), pp. 111-112, San Diego, CA, USA, 1-4 June 2004.
28. Younghak Cho, Nobuyuki Takama, Beomjoon Kim: Fabrication of Twin microcantilever array for measurement of red blood cell deformability and electrical impedance, Proceedings on the 21st. Sensor Symposium on Sensors, Micromachines and Applied Systems, pp. 521-524, 2004.
(趙永学、高間信行、金　範ジュン、赤血球の変形と電気的特性の測定用のツインマイクロカンチレバーアレーの製作：第21回　センサ・マイクロマシンと応用システム　シンポジウム　講演概要集, pp.125)
27. Peter Low, Nobuyuki Takama, Beomjoon Kim: Fabrication of out-of-plane metal microtubes using electrochemical deposition, The International SoC Design Conference (ISOCC2004), Seoul, October 25-26, pp.37-40, 2004
26. Janggil Kim, Nobuyuki Takama, Vincent Blech and Beomjoon Kim: Nano-patterning of Multiple Self-Assembled Monolayers for Bio-MEMS, 2004 MRS (Material Research Society) Fall Meeting, November 29 – December 3, Boston, MA, United States (poster presentation, GG6-6), 2004
25. J.G. Kim, N. Takama, V. Blech and B.J. Kim: Nano Scale Surface Patterning by Micro Contact Printing using a Novel Type of PDMS Stamp, The 2nd International Symposium on Nanomanufacturing (ISNM2004), November 3-5, 2004, KAIST, Daejeon, Korea, Proceeding, pp. 308-311, 2004 (Best paper Award)
24. Beomjoon KIM, Dominique Collard, Matthieu Lagouge, Francois Conseil, Bernard Legrand, Lionel Buchaillot: Thermally actuated probe arrays for manipulation and characterization of individual bio-cell, Proc. of the 12th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’03), June 8-12, Boston, USA, Vol.2, 3E22.P, pp.1255-1258, 2003
23. Younghak Cho, Tony Kuki, Yamato Fukuta, Hiroyuki Fujita, and Beomjoon KIM: Si-based micro probe card with sharp knife-edged tips combined metal deposition, Proc. of the 12th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’03), June 8-12, Boston, USA, Vol.1, 2E94.P, pp.774-777, 2003
22. N. Akamatsu, T. Suzuki, K. Mabuchi, H. Fujita, B. J. Kim, and S. Takeuchi: Fabrication and Evaluation of A Silicon Probe Array on a Flexible Substrate for Neural Recording, Proc. of 25th. AnnualInternational Conference of the IEEE Engineering in Medicine and Biology Society (EMBS), 17 – 21 September 2003, Fiesta Americana Grand Coral Beach, Cancún, México, pp. 3802-3805, 2003
21. J.W. Kim, Y. Yamagata, B.J. Kim, S. Takeuchi, T. Higuchi: Biosensor based on SU-8 cantilever by Using the Electrospray Deposition of Proteins, Proc. of The 7th International Conference on Miniaturized Chemical and BioChemical Analysis Systems (Micro TAS2003), Vol.1, pp. 399-402, October 5-9, Squaw Valley, California USA, 2003
20. K. Yamada, Y.H. Cho, B.J. Kim: Fabrication of Nano-structures using Novel Nano/Micro Contact Printing Technique, The 2nd. International Conference on NNT (Nanoimprint and Nanoprint Technology), Boston, Massachusetts, United States. 3-5, Dec. 2003
19. T. Mutsuo, T. Nakazawa, T. Niino, A. Yamamoto, B. Kim, Y. Hoshi, K. Ikeda, and H. Kawakatsu: Making Five Atomic Force Microscopes for 200,000 yen each – A Student Project -, in Proc. of The 11th International Colloquium on Scanning Probe Microscopy. p.107, December 11-13, Atagawa Hights, Shizuoka, Japan, 2003
18. Y. Hoshi, S. Kawai, D. Kobayashi, J.-G. Kim, Y.-H. Cho, S. Takeuchi, B.-J. Kim, and H. Kawakatsu: Observation of Self-Assembled Monolayer by Using Lateral Resonance of the Cantilever, in Proc. of The 11th International Colloquium on Scanning Probe Microscopy. p.105, December 11-13, Atagawa Hights, Shizuoka, Japan, 2003
17. G. M. Kim, E. ten Have, F. Segerink, B.J. Kim, N. F. van Hulst, and J. Brugger: Polymer NFO probe made by a nanomolding method, Proc of NFO7, pp.43, 2002
16. B.J.Kim, G.M. Kim, S.T. Lathika and J. Brugger: Micro/Nano Patterning Method by Mix and Match of Shadow-mask patterning and Micro-Contact Printing, First Int. Conference on Nanoimprint Nanoprint Technology(NNT), Proc. of NNT, (poster presentation), San Francisco, USA, Dec., 2002
15. Gyuman Kim, Beomjoon Kim and Juergen Brugger: Photoplastic shadow-masks for rapid resistless multi-layer micropatterning, The 11th. Int. conf. on Solid-State Sensors and Actuators (Transducers’01) and Eurosensors XV, June, Germany, pp.1632-1635, 2001
14. B.J. Kim, G.M. Kim, M. Liebau, J. Huskens, D.N. Reinhoudt and J. Brugger: SAMs meet MEMS- surface modification with self-assembled monolayers for the dry-demolding of photoplastic MEMS/NEMS, Proc. of the IEEE Int. workshop on MEMS 2001, Jan. 2001, Interlaken, Swiss. pp. 106-109, 2001
13. G.M. Kim, B.J. Kim, M. Liebau, J. Huskens, D.N. Reinhoudt, and J. Brugger: Nanoscale replication of MEMS/NEMS by surface functionalisation with self-assembled monolayers, TOKYO2001, (Scanning Probe Microscopy, Sensors and Nanostructures), May, Makuhari, Japan, 2001
12. D. Collard, H. Fujita, J.P. Gouy, H. Kawakatsu, T. Masuzawa, B. Kim, H. Toshiyoshi: International Collaboration in MEMS, Proc. of The sixth International Micromachine Symposium, Tokyo, Nov 9-10, pp11-18, 2000
11. Beomjoon Kim, Niek van Hulst, Juergen Brugger: Micromolded SNOM Probes, SXM4, 4th International Conference on the Development and Technological Application of Scanning Probe Methods, 2000
10. B.J. Kim, M. Liebau, J. Huskens, D. Reinhoudt and J. Brugger: A self-assembled monolayer-assisted surface microfabrication and release technique, Int. Conf. Micro and Nano-Engineering 2000, 20-22 September, Germany, pp.135-136, 2000
9. B. Kim, B. Otter, J. Sanderink, M. Smithers and J. Brugger: Dry lift-off” patterning on fragile surfaces using MEMS shadow masks, Eurosensors XIV, The 14th. European conf. on Solid-State Transducers, August, Denmark, pp. 619-621, 2000
8. B.J. Kim, N. van Hulst, J.P. Brugger: Photoplastic probes for near-field optical applications, Int. Conf. on NFO6, August,Twente, 2000
7. Juergen Brugger, Beomjoon Kim and Niek van Hulst: Photoplastic SU-8 probes for near-field optical applications, Optical MEMS 2000, August, Hawai, pp.135-136, 2000
6. Kim B., Otter B., Sanderink J., Smithers M., Brugger J.: Sub-100nm resistless patterning by shadow evaporation through MEMS nanostencils, Heidelberg 2000, (Scanning Probe Microscopy, Cantilever Sensors and Nanostructures) EMBL conference, May, Germany. pp.8, 2000
5. B.J. Kim, M. Hoummady, J.M. Friedt, C. Bonjour: Development of double Scanning Probe Microscope combined with monolithic 2D nanoscanner, Transducer’99, June, pp.1844-1847, 1999
4. M. Hoummady, J.M. Friedt, B.J. Kim, C. Bonjour: Integrated miniature Scanning Probe Microscope using MEMS technology, Proc. of EuSPEN’99 (1st. International Conference & general meeting of European Society for Precision Engineering and Nanotechnology), May, Germany, pp. 138-141, 1999
3. B.J. Kim, T. Masuzawa, H. Fujita, A. Tominaga: Dimensional measurement of microholes with silicon-based micro twin probes, Proc. of the IEEE Int. workshop on MEMS, Heidelberg, Germany. pp. 334-339, 1998
2. B.J. Kim, T. Masuzawa, M. Fujino, H. Fujita: Realisation of silicon-based microprobe and Development of dimensional measurement of microholes, Proc. of International Conference on Precision Engineering, Vol.2, Taipei, Taiwan. pp. 761-765, 1997
1. C. Bergaud, B.J. Kim, T. Masuzawa: Realisation of silicon-based twin microstylus for 3 dimensional characterisation of deep microholes, 3rd France-Japan Congress & 1st European-Asian Congress on mechatronics, Vol.3, pp. 640-643, 1996

国内会議

2022

204. 工藤光太，朴鍾淏，比嘉雅彦，古関文，安井文彦，小原道法,　金範埈：ワクシニアウイルスベクターを用いた新型コロナウイルスワクチン用マイクロニードルパッチの開発、第13回マイクロ・ナノ工学シンポジウム、日本機械学会第13回マイクロ・ナノ工学シンポジウム予稿集15P2-PN-5, 徳島市、アスティとくしま、2022年11月14日−16日 (poster　発表)
203. 金範埈: マイクロニードルパッチ：DDSと予防医学、第４回使えるセンサ・シンポジウム 2022, 大阪　マイドームおおさか、7月20日2022年　（招待講演）
202. 荊　賀怡，鮑　蕾蕾，秦　博語，朴　鍾淏，金　範埈:多孔質マイクロニードルパッチを用いたコレステロールセンサの開発, 2022年度精密工学会春季大会、2022年度精密工学会春季大会学術講演会講演論文集, G31, pp 536-537, 2022年3月15日−3月17日、東京工業大学(オンライン開催), 2022　(Best Presentation Awarded)

2021

201.　早川清崇、朴　鍾淏、金　範埈: 医療用マイクロニードルの形状による刺さりやすさの機械的評, Future Technologies from HIMEJI ONLINE: ＣＨＥＭＩＮＡＳ２０２１(化学とマイクロ・ナノシステム学会第44回研究会), 1P-20, 2021年11月9日-11月11日、2021
200. Beomjoon Kim: Biomolecular Needling Systems for Medicals, Digital Integrative Arts Therapy Association 1^st. International Conference, 디지털통합예술치료학회, Nov. 6^th., 2021 (invited talk, online conference)
199. 西田昂平、朴　鍾淏、金　範埈：経皮通電治療を目的としたイオントフォレシスを用いたヒアルロン酸マイクロニードルデバイスの製作、2021年度精密工学会秋季大会、2021年度精密工学会秋季大会学術講演会講演論文集, D03, pp 253-254, 2021年9月21日−9月27日、神戸大学 (オンライン開催), 2021 (9/8　proc公開、9/21発表)
198. 釜木優人、呉　力波、朴　鍾淏、金　範埈：FDM方式3Dプリンタによるメッシュ状マイクロニードルパッチの作製、2021年度精密工学会秋季大会、2021年度精密工学会秋季大会学術講演会講演論文集, D04, pp255-256, 2021年9月21日−9月27日、神戸大学 (オンライン開催), 2021　(9/21発表)
197. 金範埈:未来の生体センシング“マイクロニードル”技術について、第二回METイノベーションサミット, METイノベーション国際推進機構主催、ホテルフクラシア大阪ベイ 1F講堂、8月20日2021年　（招待講演）
（令和3年8月25日新聞記事　河内新聞紹介）
196. Libo Wu, Jongho Park, Yuto Kamaki, and Beomjoon Kim: Fabrication of polylactic acid microneedles by 3D deposition, (三次元積層法を利用したポリ乳酸マイクロニードルの製作) Vol. 73, No.3, pp. 171-174, SEISAN-KENKYU, 生産研究、2021 (https://doi.org/10.11188/seisankenkyu.73.171)
195. Leilei Bao, Jongho Park, Gwenael Bonfante, Hakjae Lee, and Beomjoon Kim: Biodegradable porous microneedles via PLA microspheres for rapid ISF extraction and diagnosis, (生体適合性多孔質ポリ乳酸マイクロニードルを用いた細胞間質液の迅速採取と診断) Vol. 73, No.3, pp. 167-170, SEISAN-KENKYU, 生産研究、2021 (https://doi.org/10.11188/seisankenkyu.73.167)
194. Beomjoon Kim and BJ Kim lab. all members:Biomolecular Needling Systems for Medicals, Online Workshop between MESA+ and IIS 2021, March 24-25, 2021
193. Leilei Bao, Jongho Park, Gwenael Bonfante, Hakjae Lee, Beomjoon Kim: Biodegradable porous microneedles via PLA microspheres for rapid ISF extraction, 2021年度精密工学会春季大会、2021年度精密工学会春季大会学術講演会講演論文集, G0102, pp 731-732, 2021年3月16日−3月22日オンライン開催, 2021
192. Jongho Park, Seung Hwan choi, Young Jin Kim, Jong Seung Lee, and Beomjoon Kim: Dissolvable Microneedles embedded with microdroplets for sustained drug releasing, 2021年度精密工学会春季大会、2021年度精密工学会春季大会学術講演会講演論文集,　G0103, pp 733-734, 2021年3月16日−3月22日オンライン開催, 2021
191. Kotaro Shobayashi, Xiaobin Wu, Jongho Park, Nobuyuki Takama, Beomjoon Kim: A Study on optical microneedles lens for Telangiectasia, 2021年度精密工学会春季大会、2021年度精密工学会春季大会学術講演会講演論文集,　G0101, pp 729-730, 2021年3月16日−3月22日オンライン開催, 2021
190. 金範埈:痛くないマイクロニードルパッチ型センサーの開発、第39回　ナノ茶論（ナノサロン）：2020年度第1回医療MEMS研究会　(SSN研究会WG5)-医薬品事業におけるCAEの活用事例と予防医学への応用研究、一般財団法人マイクロマシンセンター主催、オンラインセミナー、3月3日2021年　（招待講演）

2020

189. 金範埈:生体分解性マイクロニードルを用いた新規DDSとグルコースセンサーへの応用、第39回　マイクロナノ先端技術研究会：2020年度第1回医療MEMS研究会　(SSN研究会WG5)-医薬品事業におけるCAEの活用事例と予防医学への応用研究、一般財団法人マイクロマシンセンター主催、オンラインセミナー、10月22日、2020　（招待講演）　http://www.nanomicro.biz/mems/2020/11/post-52aff6.html （記事；開催報告）
188. Xiaobin Wu, Jongho Park, Nobuyuki Takama, Beomjoon Kim: A study on biodegradable microneedles patch for the light therapy – 2^nd. Report Optical transmission analysis of microneedles for LED therapy-, Proceedings of JSPE Semestrial Meeting (The Japan Society for Precision Engineering) (吴　小玢, 朴鍾淏, 高間信行, 金　範埈: 光治療におけるマイクロニードルパッチの製作-第２報 LED光源を用いるマイクロニードル光転送分析)，精密工学会2020年度秋季大会、2020年度精密工学会秋季大会学術講演会講演論文集,　G0108, pp 434-435, 2020年9月1日−9月3日オンライン開催, 2020 (Best Presentation Awards　受賞)
187. Leilei Bao, Gwenael Bonfante, Hakjae Lee, Jongho Park, Nobuyuki Takama, Beomjoon Kim: Biodegradable porous Microneedles via PLA microspheres for rapid ISF extraction, 精密工学会2020年度秋季大会、2020年度精密工学会秋季大会学術講演会講演論文集,　G0107, pp. 432-433, 2020年9月1日−9月3日オンライン開催, 2020
186．Xiaobin Wu, Junichiro Kono, Nobuyuki Takama, Beomjoon Kim: 光治療におけるマイクロニードルパッチの製作-第1報 LED光源を用いるマイクロニードル光治療 (A study on biodegradable microneedles patch in the light therapy-1^st report Microneedles combining LED therapy), 精密工学会2020年度春季大会、2020年度精密工学会春季大会学術講演会講演論文, C28, pp. 178-179, 東京農工大学, 3月17−19日（開催中止）, 2020年　（2020年3月1日CD公開）

2019

185. 金範埈: EUJO-LIMMS/SMMiL-Eの活動について, Vol. 71, No. 3, pp. 304-308, SEISAN-KENKYU, 生産研究、2019
184. Yasuhisa Morishita, Nobuyuki Takama and Beomjoon Kim: Fabrication of biodegradable porous microneedles for ISF extraction, (ISF採取のための生分解性多孔質マイクロニードルの作製, 森下靖久, 高間信行, 金範埈) Vol. 71, No.4, pp. 763-768, SEISAN-KENKYU, 生産研究、2019 (cover figure) https://doi.org/10.11188/seisankenkyu.71.763
183．Xinyu Xu, Taichi Ito, Seiichi Ohta, Yoshihide Asano, Satoshi Toyama, Teru Okitsu, Libo Wu, Nobuyuki Takama, Beomjoon Kim: Biodegradable Imatinib Mesylate Microneedle Patches for Treatment of Localized Scleroderma, 精密工学会2019年度秋季大会、2019年度精密工学会秋季大会学術講演会講演論文, pp. 196-197, 静岡大学浜松キャンパス, 9月4-6日, 2019年
182. Leilei Bao, Nobuyuki Takama, Beomjoon Kim: Fabrication of whole-dissolvable microneedles patch in large area for transdermal drug delivery, 精密工学会2019年度秋季大会、2019年度精密工学会秋季大会学術講演会講演論文, pp. 198-199, 静岡大学浜松キャンパス, 9月4-6日, 2019年

2019

181. L. Bao, N. Takama, B. Kim: Fabrication of Whole-dissolvable Microneedles Patch for Efficient Transdermal Drug Delivery, BIO UT (2019) (第19回東京大学生命科学シンポジウム), 東京大学､ Japan, 20^th, April, 2019 （Poster）
180. 朴鍾淏, 金範埈: シャドーマスクを用いた光の制御による多孔質パターン基板の製作,平成30年度生体医歯工学共同研究拠点成果報告会, 平成30年度生体医歯工学共同研究拠点成果報告書, pp. , 東京医科歯科大学 M&Dタワー, 2019年3月8日(poster)
179. 河野淳一郎, 吴　小玢, 高間信行, 金　範埈: 鋼球から作製した集光レンズを用いたOptical microneedle arrayの作製および評価, 精密工学会2019年度春季大会、2019年度精密工学会春季大会学術講演会講演論文, D45, pp. 357-358, 東京電機大学東京千住キャンパス, 3月13-15日, 2019年
178. Xiaobin Wu, Junichiro Kono, Nobuyuki Takama, Beomjoon Kim: Development of Optical Microlens-Microneedle Array for Phototherapy, 精密工学会2019年度春季大会、2019年度精密工学会春季大会学術講演会講演論文, D44, pp. 355-356, 東京電機大学東京千住キャンパス, 3月13-15日, 2019年
177. Leilei Bao, Nobuyuki Takama, Beomjoon Kim: Fabrication of Dissolvable Coated Thin-film Mask with Biodegradable Microneedles by Drawing Lithography for Efficient Transdermal Drug Delivery, 精密工学会2019年度春季大会、2019年度精密工学会春季大会学術講演会講演論文, D43, pp. 353-354, 東京電機大学東京千住キャンパス, 3月13-15日, 2019年

2018

176. Leilei Bao, Anthony W. Coleman, Nobuyuki Takama, Beomjoon Kim: Fabrication of diisolvable microneedles by utilizing 3D-printed PMMA microstamp for transdermal drug delivery, 精密工学会2018年度秋季大会、2018年度精密工学会秋季大会学術講演会講演論文, 2A(T)84, pp. 89, 函館市函館アリーナ, 9月5-7日, 2018年 (9/6 poster)
175. 中石光紀,　高間信行, 金範埈：先尖型マイクロニードルを用いた広面積パッチのためのSiウェーハモールド作製と評価、精密工学会2018年度秋季大会、2018年度精密工学会秋季大会学術講演会講演論文, 2A(T)83, pp. 89, 函館市函館アリーナ, 9月5-7日, 2018年 (9/6 poster)
174.　森下靖久,　高間信行, 金範埈：生分解性多孔質マイクロニードルの開発、精密工学会2018年度秋季大会、2018年度精密工学会秋季大会学術講演会講演論文, 2A(T)82, pp. 89, 函館市函館アリーナ, 9月5-7日, 2018年 (9/6 poster)
173. 林謙作、久米村百子、金田祥平、藤井輝夫、金範埈、藤田博之:　シリコン製ナノピンセットにおける細胞の把持・解放のためのプローブ表面改良（Surface modification on probes of Silicon nanotweezers for cell trapping and releasing）, Vol. 70, No.3, pp. 215-218, SEISAN-KENKYU, 生産研究、2018
172. 黒川祥太郎、高間信行、金範埈: 血液検査パッチを目的とした採血用マイクロニードルの開発 (Development of blood extracting microneedle for blood multidiagnostic chip), Vol. 70, No.3, pp. 71-74, SEISAN-KENKYU, 生産研究、2018 (cover figure，展開研究謝辞)
171. 木下梨恵、橋詰侑也、高間信行、金範埈: OCTによる生体分解性マイクロニードルパッチの皮膚透過性の評価(Evaluation for skin permeability of biodegradable microneedles patch by OCT), Vol. 70, No.3, pp. 61-64, SEISAN-KENKYU, 生産研究、2018(展開研究謝辞)
170. Anthony W. Coleman, Laurent Mollet, Libo Wu, Nobuyuki Takama, and Beomjoon Kim: When Bottom-up Meets Top-down: Etching as A Post-Fabrication Methodology in 3D printing、精密工学会2018年度春季大会、2018年度精密工学会春季大会学術講演会講演論文, H61, pp. 517-518, 中央大学後楽園キャンパス、3月15-17日、2018年 (3/17 Keynote speaker)
169. 木下梨恵, 橋詰侑也, 高間信行, 金範埈: OCTによる生体分解性マイクロニードルパッチの皮膚透過性の評価、精密工学会2018年度春季大会、2018年度精密工学会春季大会学術講演会講演論文集, H64, pp. 521-522, 中央大学後楽園キャンパス、3月15-17日、2018年 (3/17 Oral)
168. 黒川祥太郎, 高間信行, 金範埈: 血液検査パッチを目的とした採血用マイクロニードルの開発(第２報)、精密工学会2018年度春季大会、2018年度精密工学会春季大会学術講演会講演論文集, H67, pp. 525-526, 中央大学後楽園キャンパス、3月15-17日、2018年 (3/17 Oral)
167. Libo Wu, Anthony W. Coleman, Momoko Kumemura, Nobuyuki Takama, and Beomjoon Kim: 3D printing assisted method for dissolving microneedle fabrication、精密工学会2018年度春季大会、2018年度精密工学会春季大会学術講演会講演論文集, H66, pp. 523-524, 中央大学後楽園キャンパス、3月15-17日、2018年 (3/17 Oral)
166. 高間信行, 羅凱峰, 興津輝，丸岡豊, 金範埈:　PDMS stampによる生体溶解性のマイクロニードルパッチの製作に関する研究—第２報　円柱型スタンプを使用してのマイクロにードルの製作, 精密工学会2018年度春季大会、2018年度精密工学会春季大会学術講演会講演論文集, H63, pp. 519-520, 中央大学後楽園キャンパス、3月15-17日、2018年 (3/17 Oral)
165. 金範埈, 興津輝，丸岡豊: 経皮薬物送達のための生体分解性マイクロニードルパッチの製造と応用, メディカルジャパン 2018 大阪（第4回日本医療･介護総合EXPO展）　アカデミックフォーラム，インテックス大阪, 2018年2月21日-23日（展示会）、展示及び口頭発表
164. 朴鍾淏, 金範埈: 二重タンクセルと光の制御を用いた多孔質パターン基板の製作,平成29年度生体医歯工学共同研究拠点成果報告会, 東京工業大学すずかけ台キャンパス, 2018年3月9日(poster)

2017

163. Su Meng, Beomjoon Kim: High-Performance Hybrid Generator based on Low Frequency Stochastic Resonance, LIMMS Energy Harvesting Workshop, RCAST (Building 3, M2 floor), The University of Tokyo, Nov. 13^th., 2017 (invited talk)
162. 黒川祥太郎, 高間信行，金範埈: 全血での血液検査パッチを目的とした採血用マイクロニードルの開発、第34回「センサ・マイクロマシンと応用システム」シンポジウム, 広島国際会議場、01pm4-PLN-14, 10月31日-11月2日、2017年 (11/1 poster)
161. 呉力波, 高間信行, 金正東, 金範埈: A Novel Fabrication of Dissoluble Microneedle Patch for Transdermal Drug Delivery (The 2^nd. Report) (経皮薬物送達のための生体分解性マイクロニードルの新規制作方法の開発, 第2報)、精密工学会2017年度秋季大会、2017年度精密工学会秋季大会学術講演会講演論文集、N70, pp 945-946, 大阪大学、9月20-22日、2017年 (9/22 Oral)
160.　高間信行, 丸岡豊, 金範埈: PDMS stampによる生体溶解性のマイクロニードルパッチの製作に関する研究 (Study on fabrication of dissoluble microneedle patch by PDMS stamp)、精密工学会2017年度秋季大会、2017年度精密工学会秋季大会学術講演会講演論文集、N40, pp 927-928, 大阪大学、9月20-22日、2017年 (9/21 Oral)
159. 黒川祥太郎, 金範埈: 全血での血液検査パッチを目的とした採血用マイクロニードルの開発(Development of blood extracting microneedle for blood multidiagnostic chip)、精密工学会2017年度秋季大会、2017年度精密工学会秋季大会学術講演会講演論文集、N69, pp 943-944, 大阪大学、9月20-22日、2017年 (9/22 Oral)
158. 李學哉, 日比柾宏, 小林大, 高間信行, 金範埈: 新規のTEGによる電力供給システムの構築 (Construction of power supply system with new TEG)、精密工学会2017年度秋季大会、2017年度精密工学会秋季大会学術講演会講演論文集、E39, pp 333-334, 大阪大学、9月20-22日、2017年 (9/21 Oral)
157. 日比柾宏, 高間信行, 金範埈:　確率共振を利用した低周波振動エネルギーハーベスタによって駆動されるワイヤレスセンサネットワーク, 平成２９年度電気学会センサ・マイクロマシン(E)部門総合研究会, 兵庫県姫路市, 2017年6月29日-30日, 口頭発表(6/30)
156. 蘇萌, 小林大, 高間信行, 金範ジュン: 確率共振を用いたハイブリッド振動エネルギーハーベスタ, 平成２９年度電気学会センサ・マイクロマシン(E)部門総合研究会、兵庫県姫路市, 2017年6月29日-30日,口頭発表(6/30)
155. 金範埈, 朴鍾淏: 機能性ポーラスシリコン膜を用いた生体分子検出チップの開発,平成２８年度生体医歯工学共同研究拠点成果報告会, 東京医科歯科大学３号館２階講義室１, ３月２４日、2017　（poster）
154. 王旭、高間信行、金範埈: A Cost-Efficient Fabrication Method of Micro-Needle Based on Rod-Assisted Dispenser（マイクロロッド式ディスペンサを用いた生体溶解性マイクロニードルパッチの製作に関する研究）、精密工学会2017年度春季大会、2017年度精密工学会春期大会学術講演会講演論文集、E05, pp　, 慶應義塾大学、3月13-15日、2017年 (3/13 Oral)
153. 呉力波、高間信行、金正東、金範埈: A Novel Fabrication of Dissoluble Microneedle Patch for Transdermal Drug Delivery(経皮薬物送達のための生体分解性マイクロニードルの新規制作方法の開発)、精密工学会2017年度春季大会、2017年度精密工学会春期大会学術講演会講演論文集、E06, pp　, 慶應義塾大学、3月13-15日、2017年 (3/13 Oral)
152. 金範埈: バイオセンサー等の将来と医療、情報、新エネルギ・安全社会の分野における応用展開, 日本情報経営学会(JSIM) 主催　「スマート･モバイル研究プロジェクト研究会」，東京理科大学　神楽坂キャンパス富士見校舎、2017年3月3日 (invited talk)

2016

151-7. 金範埈: Energy harvest device for Trillion sensor network, 「第4次産業革命　対応現状と課題」　韓日産業技術協力フォーラム (Korea-Japan Industrial Technology Forum),　Sheraton Seoul Palace Hotel, ソウル市,　韓国, 2016年12月22日
150-6. 金範埈: 摩擦帯電と確立共振を用いたエネルギーハーベストデバイス, 平成28年度東大精研会ビジネス研究会,　東京大学本郷キャンパス工学部14号館 1階 141講義室, 2016年12月13日
149-5. 金範埈: マイクロニードルパッチ型ドラッグデリバリーシステムの開発, 平成28年度第1回奨励会特別研究委員会,　東京大学生産技術研究所 An棟401-402, 2016年7月21日
148-4. 金範埈: LIMMs, Micro and Nano Devices for Advanced MEMS, BioMEMS, and Nanotechnology, 日仏国際共同研究テクノロジー・ショーケース「Technology Showcase form French Japanese joint research laboratories in Japan」,　JST東京本部B1大会議室, 2016年6月15日
147-3. 湯川泰弘,金範埈,松永行子: 灌流可能な3次元 in vitro微小血管デバイスの開発, 化学とマイクロ・ナノシステム学会第33回研究会（33rd CHEMINAS）, 東京大学生産技術研究所, 1P05, 2016年4月25−26日 (4/25 poster presentation)
146-2. 湯川泰弘、大橋俊郎、金範埈、松永行子: 灌流可能な In vitro 微小血管デバイスにおける細胞挙動の観察、第15回日本再生医療学会総会、(The 15^th. Congress of the Japanese Society for Regenerative Medicine)、10413, 2016年3月17日—19日、大坂国際会議場　(3/17, poster presentation)
145-1. 金範埈, 河野通隆, XiaoSheng ZHANG: 未来センサーネットワークのためのマイクロ環境発電、精密工学会2016年度春季大会、東京理科大学、抄録集 pp , 3月15-17日、2016年 (3/17, keynote speaker)

2015

144-8. Beomjoon Kim: 溶解性マイクロニードルパッチ, バイオ・MEMS実践セミナー、文部科学省ナノテクノロジープラットフォーム事業、微細加工プラットフォーム、東京大学生産技術研究所E棟501/502室、2015.Dec.11. (Invited talk)
143-7. Beomjoon Kim: MEMS Energy Harvest for Trillion Sensors Network, 日韓未来創造フォーラムー未来志向の日韓関係構築へ・先端科学技術と新ビジネス展開—(Creative Future Forum: New Cooperation in leading technology), 25, Nov. 2015, Sokairou Hall, GRIPS (政策研究大学院大学、想海樓ホール)、日本内閣庁と韓国未来創造科学部主催、(invited talk)
142-6. Beomjoon Kim: New energy harvesters for micro sensor networks, The 2^nd. Korea-Japan Joint workshopn on Micro/Nano-Mechatronics and Production Technology, E3-314, Kyungpook National University, Korea, 28. Oct., 2015 (invited talk)
141-5. Nathalie Frances, Beomjoon Kim, Hiroyuki Fujita, Eric Lartigau, Teruo Fujii and Dominique Collard: Seeding Microsystems in Medicine in Lille-European Japanese Tehcnologies against Cancer A blank is missing (SMMiL-E), Vol.67, No.5, pp 513-516, SEISAN-KENKYU (生産研究), 2015
140-4. 湯川泰弘、藤澤佳乃子、金範埈、松永行子: シェアストレス負荷条件下におけるin vitro三次元微小血管内の血管内皮細胞の挙動観察 (Observation of Endothelial Cell behavior within in vitro 3D Microvasculature under shear stress), Vol. 67, No.3, pp. 251-253, SEISAN-KENKYU, 生産研究、2015 (cover figure)
139-3. 金範埈: Biomolecular recognition by calixarene capped Ag nanoparticles, Korea-Japan Joint Workshop on Micro Needles (マイクロニードル日韓ワークショップ2015), 東京大学生産技術研究所Ａｎ棟コンベンションセンター, June 29, 2015 (Oral and general Chair)
138-2. 結城真一, イエスィルコイフィリス, 上野遼平, 金　範埈: 単一細胞トラッピングデバイスを用いたマラリアの画像検出システムの開発, 平成27年度電気学会センサ・マイクロマシン部門総合研究会バイオ・マイクロシステム研究会(BMS), The Papers of Technical Meeting on Bio Micro Systems 2015, IEE Japan, pp.53-56 (BMS-15-47), 九州大学医学部百年講堂, 2015年7月2日 (oral)
137-1. 金範埈: 安心・安全・健康な社会を目指すトリリオン・マイクロセンサー、第84回日本寄生虫学会大会,シンポジウム〜異分野融合若手研究者の集い、杏林大学三鷹キャンパス、抄録集 pp.46, 3月21-22日、2015年 (invited)

2014

136-8. 水野雄貴, 邊益周, 金範埈, 一木正総: PZT薄膜キャパシタの自己組織化単分子膜を用いた樹脂基板転写手法, 第31回「センサ・マイクロマシンと応用システム」シンポジウム, Proceedings 21am2-G1, 4 pages, くにびきメッセ, 島根県、2014年10月20日～22日 (Oral presesntation)
135-7. Ikjoo Byun, Yuku Mizuno, Ryohei Ueno, and Beomjoon Kim: Pattern Transfer Technique on Polymeric Substrates Using Dry Peel-Off Process for Flexible Electronic Device, 第31回「センサ・マイクロマシンと応用システム」シンポジウム, くにびきメッセ, 島根県、2014年10月20日～22日 (20.Oct., 2014, poster)
134-6. 上野遼平, フィリスイエスィルコイ, ユルゲン　ブルガー, 金範埈: マイクロ流体デバイスの熱解析のための白金マイクロヒーターの電気特性, 21pm3-ps12, 第31回「センサ・マイクロマシンと応用システム」シンポジウム, くにびきメッセ, 島根県、2014年10月20日～22日 (21.Oct., 2014 poster)
133-5. 金範埈: 分散自立型センサーによる安全・安心・健康社会の実現、電子情報通信学会主催、次世代ナノ技術に関する時限研究専門委員会、材料デバイスサマーミーティング「ナノ・マイクロ加工技術のバイオ・医療応用最前線」講演、機械振興会館、6月20日、2014年 (invited)
132-4. 上野遼平, Filiz Yesilkoy, Juergen Brugger, and 金範埈: 局所温度制御機能付きマイクロ流体デバイスの熱解析、設計、製作, Vol. 66, No.3, pp. 281-284, 生産研究、2014 (cover figure)
131-3. 金範埈: 環境に優しいナノ電気機械システム(Green NEMS)、電子実装工学研究所IMSI委員会講演、東京大学農学部弥生講堂セイホクギャラリー、1月21日、2014年 (invited)
130-2. 湯川泰弘，朴鍾淏，新田英之，金範埈: ナノスリット中の長いDNA分子に対する電気泳動及び流体圧力の印加に関する研究, 2014年度精密工学会春季大会, 学術講演会講演論文集，pp.731-732, 東京大学本郷キャンパス、3月18日−20日、2014年
129-1. 天野佑基，一木正聡，金範埈: 高容量密度薄膜キャパシタの作製と自己組織化単分子膜によるハンドリング手法の検討, 2014年度精密工学会春季大会, 学術講演会講演論文集, pp.347-348, 東京大学本郷キャンパス、3月18日−20日、2014年

2013

128-12. Beomjoon Kim: Investigation of Long DNA molecules behavior in nano-slit with electrophoresis and pressure gradient, SMMIL-E Workshop on BioMEMS technologies against Cancer, 東大生研 An 301-302, 9-10. Dec., 2013
127-11. 湯川泰弘，朴耕徳，朴鍾淏, 新田英之, 金範埈: ナノスリット中の長いDNA分子に対する電気泳動と圧力勾配の同時印加に関する研究、化学とマイクロ・ナノシステム学会第２８回研究会 (28th. CHEMINAS)、平成２５年１２月５−６日、イーグレ姫路あいめっせホール、2P11, 2013.
126-10. Ikjoo Byun, Ryohei Ueno, and Beomjoon Kim: Transfer of thin film metal micro-electrodes to polymer for flexible electronics, SEISAN-KENKYU, Vol. 65, No. 6, pp. 121-124, 2013 (邊　益周, 上野遼平, 金範埈: フレキシブルエレクトロニクスデバイスを実現する薄膜電極の新規転写技術, 生産研究, Vol. 65, No. 6, pp. 121-124, 2013)
125-9. 天野佑基，辺益周, 一木正聡，金範埈: SAMトランスファー法を用いた薄膜キャパシタ構造の樹脂への転写技術の確立, 電気学会センサ・マイクロマシン部門, 第30回「センサ・マイクロマシンと応用システム」シンポジウム, 仙台国際センター、2013年11月5日～7日 (11月5日、5PM1-F-5, 4 pages, Oral)
124-8. 湯川泰弘，朴耕徳，金範埈: 電気泳動と圧力勾配の同時印加に対するナノスリット内のDNA分子挙動の解析, 電気学会センサ・マイクロマシン部門, 第30回「センサ・マイクロマシンと応用システム」シンポジウム, 仙台国際センター、2013年11月5日～7日（11月6日、6PM3-PSS-106, 4 pages, poster）
123-7. 湯川泰弘，朴耕徳，朴鍾淏, 新田　英之, 金範埈: ナノスリット中の長いDNA分子に対する電気泳動と圧力勾配の同時印加に関する研究, BMS-13-040, 平成25年度電気学会センサ・マイクロマシン部門バイオ・マイクロシステム研究会(BMS)テーマ「革新的バイオデバイス」, The Papers of Technical Meeting on Bio Micro Systems, IEE Japan, pp. 27-31, 東京大学生産技術研究所、2013年10月8日（oral）
122-6. Oya Koc, M. Cagatay Tarhan, Yoshiyuki Kato, Hiroyuki Fujita, Beomjoon Kim: Drop-on-demand Patterning of Microtubules for Bio-material Functionalized Diagnostic Devices, BMS-13-34, 平成25年度電気学会センサ・マイクロマシン部門総合研究会バイオ・マイクロシステム研究会(BMS), The Papers of Technical Meeting on Bio Micro Systems, IEE Japan, pp. 51-56,東京工科大学蒲田キャンパス, 2013年8月9日 (oral) (微小管のオンデマンド型マイクロパターニング技術と生体分子修飾した診断チップの開発)
121-5. 金範埈: 日本ものづくりの魂- From Nano science to Nano technology, 日本新電気電子産業技術展望, invited lecture, 海東日本技術情報センター, Seoul National University, Seoul, Korea, 27. May 2013.
120-4. 金範埈: Green Tech-Power of NEMS, Seoul National University Nano IP Enterprise Program (NIP The 7^th. Class), invited lecture, Seoul National University, Seoul, Korea, 22. May 2013.（6/23．Non-official Wonkwang University School of Medicine, invited lecture, Iksan, Korea）
119-3. 金範埈: HARMNST 2013学会報告、有機機能材料のリソグラフィ加工コンソーシアム第８回定例会、京都大学・桂キャンパス　桂インテックセンター　3Ｆ／桂ラウンジ、(invited talk), 2013年6月7日
118-2. 金範埈: “NEMS meets Bio-sensing: Calixarene capped Ag nanoparticles for sensing”、H25年度東大生研　第１回奨励会特別研究委員会（バイオ･マイクロ･ナノテク研究会）、東京大学生産技術研究所　Ew501/502, 2013年5月10日
117-1. 金範埈: “NEMS meets Bio/molecular engineering – there are plenty of things to do in the middle”、国立国際医療研究センター研究所との「連携・協力の推進に関する協定」締結記念シンポジウム、東京大学生産技術研究所An棟コンベンションホール、2013年3月13日

2012

116-4. Beomjoon Kim, “생산제조기술의 최전선”, Journal of Korean Society of Manufacturing Technology engineers (KSMTE), Vol. 21, No. 4, pp. 3-8, 2012 (In Korean, Interview article)
115-3. 金範埈: “NEMS meets Bio-sensing, ナノヒーターのバイオ応用と自己組織化のNEMS応用”、東京大学グローバルＣＯＥプログラム機械システム・イノベーション国際拠点(GMSI)、拡張ナノ空間実践演習講義、6月28日(2012)
114-2. 金範埈, 朴耕徳: ナノスリットにおける圧力勾配と電気泳動を用いた長いDNA単分子の迅速分離, 第25回　化学とマイクロ・ナノシステム研究会, 平成24年5月17日−18日, 崇城大学, 熊本市, poster 3P26, (2012)
113-1. Beomjoon Kim and Kyungduck Park: A separation method with length-dependent mobility of long DNA molecules in nanofluidic device, SEISAN-KENKYU, Vol. 64, No.3, pp. 307-311, 2012 (金範埈, 朴耕徳: ナノ流路デバイスにおける長いDNA単分子の分離法の開発, 生産研究, Vol. 64, No. 3, pp. 307-311, (2012)

2011

112-12. Ikjoo Byun, Jongho Park, Joonwon Kim and Beomjoon Kim: Fabrication of PDMS Nano Stamp and Si Nano Mold with Extremely Low Surface Energy by Various Nano Structures, 東京大学グローバルＣＯＥプログラム機械システム・イノベーション国際拠点 第４回GMSI国際シンポジウム、No. 67, 東京大学福武ホール、2012.3.2. (Poster presentation)
111-11. 牧野翔，朴鍾淏, 高間信行, 金範ジュン：マイクロ・コンタクト・プリンティングのロール・ツー・ロールへの応用、日本機械学会関東支部第18期総会講演会, 講演論文集, No.120-1, pp. 515-516, 日本大学生産工学部　津田沼キャンパス, 2012.3.9-10. (３月１０日No.1725. Oral)
110-10. 牧野翔，金範埈：オプティカル・ソフト・リソグラフィーにおける自己組織化単分子膜の接着層･分離層としての利用、2012年春季第59回応用物理学関係連合講演会、講演予稿集CD, pp. 22-001, 早稲田大学早稲田キャンパス、2012年3月15日（木）～18日（日） (No.15p-GP3-1, poster)
109-9. Jongho Park, Hiroyuki Fujita and Beomjoon Kim: Fabrication of metallic structures on curved substrate using optical softlithography and electroplating, 東京大学グローバルＣＯＥプログラム機械システム・イノベーション国際拠点第3回GMSI国際シンポジウム、東京大学福武ホール、2011.3.3. (Best Poster Presentation)
108-8. 金範埈：NEMS meets Bio sensing in single cell/DNA level (ナノ加工とバイオセンシングへの応用デバイス), 東京大学「疾患分子工学」研究連携ユニット講演会, 東京大学医科学研究所, 2011.11.9.
107-7. 李珠瓊, 金範埈, 毛利尚武, 増沢隆久: ピーリング工具を用いた微細加工（第１報—複合異種材料の加工特性—), 2011年精密工学会秋季大会学術講演会講演論文集（L61）, pp.713-714, 20-22. September, 石川県金沢大学, 2011年9月22日
106-6. G. Tortissier, P. Ginet, L. Jalabert, B. Kim, H. Fujita, and H. Toshiyoshi: Inkjet printed optical color filter for flexible display applications, 電気学会センサ・マイクロマシン部門主催第28回「センサ・マイクロマシンと応用システム」シンポジウム, 2011年9月26日（poster), 東京　タワーホール船堀（The 2８th. Sensor Symposium on Sensors, Micromachines and Applied systems)、Book of Abstracts, pp. 117, P2-9, Tokyo, Japan, 26, Sept. 2011. [電気学会センサ・マイクロマシン部門主催　第28回センサ・マイクロマシンと応用システムシンポジウム論文集(2011,東京) pp.510-513]
105-5. 朴　鍾淏, 高間信行, 金　範埈: 凹面基板上のマイクロパターニングと円筒形ポリマースタンプ製作への応用, 電気学会センサ・マイクロマシン部門主催第28回「センサ・マイクロマシンと応用システム」シンポジウム, 2011年9月27日（Oral）, 東京　タワーホール船堀（The 2８th. Sensor Symposium on Sensors, Micromachines and Applied systems), Book of Abstracts, pp. 73, C4-2, Tokyo, Japan, 27, Sept. 2011. [電気学会センサ・マイクロマシン部門主催　第28回センサ・マイクロマシンと応用システムシンポジウム論文集(2011,東京) pp.315-318]
104-4. 金範埈：ミリ秒応答・局所温度制御による熱ショックタンパク質の発現メカニズムを解明に向けて、第3回マイクロ・ナノ多機能デバイス研究ネットワーク－マイクロ・ナノデバイスのバイオ分野への応用－, 慶應義塾大学　新川崎Ｋスクエア(K2)タウンキャンパス　K²ハウス（厚生棟）会議室, 2011.7.4.
103-3. 山田健太、ジネパトリック、ボルツセバスチャン、モンターニュケビン、酒井康行、フォーミードミニク、ラジャブプールアリ、金範埈: 単一細胞レベルでの熱ショックタンパク質の発現メカニズム解明にむけたマイクロヒーターデバイスの開発、生産研究, Vol.63, No.3, pp. 345-349, (2011) (Kenta Yamada, Patrick Ginet, Sebastian Volz, Kevin Montagne, Yasuyuki Sakai, Dominique Fourmy, Ali Rajabpour and Beomjoon Kim, Development of gold microheater array devices for investigation of thermo-mechanism of heat shock proteins at single cell level, SEISAN-KENKYU, Vol. 63, No.3, pp. 345-349, 2011)
102-2. 金範埈：熱ショックタンパク質の発現メカニズム解明に向けたマイクロヒーターデバイスの開発、H23年度東大生研　第１回奨励会特別研究委員会(マイクロマシン技術の応用を探る研究会)、東京大学生産技術研究所　Dw601, 2011.5月12日．
101-1. Jongho Park, Ikjoo Byun, Hiroyuki Fujita, Beomjoon Kim: Fabrication of metallic microstructure on curved substrate by optical softlithography and copper electroplating, Proceedings of The 13th. Korean MEMS conference, Jeju, Korea, 7-9 April, pp. 219-220, (FP-2-34), 2011 (poster presentation)

2010

100-15. 金範埈：ナノ加工とバイオセンシングへの応用デバイス、第２回マイクロ・ナノ多機能デバイス研究ネットワーク, 東京大学武田ホール, 2010.12.24
99-14. 山田健太、パトリックジネ、セバスチャンボルツ、ケビンモンターニュ、酒井康行、ドミニクフォーミー、アリラジャブプール、金範埈: Auマイクロヒーターデバイスの製作及び生物細胞の局所加熱、 「細胞を創る」研究会3.0, pp. 46, ２０１０年１１月１２日、東京大学生産技術研究所
98-13. 山田健太、パトリックジネ、セバスチャンボルツ、ケビンモンターニュ、酒井康行、ドミニクフォーミー、アリラジャブプール、金範埈：細胞集団の局所加熱と熱ショック応答の計測のためのマイクロヒーターデバイス、第２２回化学とマイクロ・ナノシステム研究会 (22nd. CHEMINAS)講演要旨集、CS68, pp. 74, ２０１０年１１月１７−１８日、名古屋大学医学部付属病院中央診療棟、2010
97-12. 新田英之、朴耕徳、高間信行、藤田博之、金範埈：PDMSナノチャネルを用いたDNA配列チップーハイスループット蛋白質一分子計測システムを目指して、第２２回化学とマイクロ・ナノシステム研究会(22nd. CHEMINAS)講演要旨集、CS29, pp. 33, ２０１０年１１月１７−１８日、名古屋大学医学部付属病院中央診療棟、2010
96-11. Kyungduck Park, Nobuyuki Takama, Teruo Fujii, Hiroyuki Fujita, and Beomjoon Kim (朴耕徳、藤井輝夫、藤田博之、金範埈) ： Novel Fabrication of Nanofluidic Channel and Behavior of Single DNA Molecules Induced by Nanoconfining Environment (ナノチャネル製作及びナノスケール環境内でのＤＮＡ単分子挙動特性)、第２７回センサ・マイクロマシンと応用システムシンポジウム（The 27th. Sensor Symposium on Sensors, Micromachines, and Applied systems), Book of Abstracts, pp. 131, A3-3, Shimane, Japan, 14-15, Oct. 2010. (優秀論文賞受賞) 電気学会センサ・マイクロマシン部門主催　第27回センサ・マイクロマシンと応用システムシンポジウム論文集(2010,島根) pp.532-536. (acknowledgment of KIMM)
95-10. 金範埈：シリコンナノワイヤを用いたバイオセンシング、H22年度東大生研　第１回奨励会特別研究委員会（バイオ･マイクロ･ナノテク研究会), 東京大学生産技術研究所　Dw404, 2010.7月22日．
94-9. 金範埈：新規ナノチャネルの製作及びＤＮＡ分子分離への応用、H22年度東大生研　第１回奨励会特別研究委員会(マイクロマシン技術の応用を探る研究会)、東京大学生産技術研究所　An301-302, 2010.5月20日．
93-8. 金範埈：ナノ加工とバイオセンシングへの応用デバイス、次世代センサ協議会　第58回研究会, 東京大学生産技術研究所　大セミナー室(Dｗ601), 2010.6.4.
92-7. 朴耕徳、藤井輝夫、藤田博之、金範埈：新規ナノチャネルの製作及びＤＮＡ分子分離への応用、第１０回東京大学生命科学シンポジウム (Todai BIO 2010)、東京大学本郷キャンパス工学部2号館フォーラム、2010.5.1. （ポスター発表）
91-6. 朴耕徳、高間信行、藤井輝夫、藤田博之、金範埈：熱蒸着及びKOH溶液エッチングを用いたナノスケール流路製作及びDNA分子挙動特性観察への応用 (Fabrication of nanofluidic channels using shadow mask evaporation evaporation and KOH solution etching for the study of DNA molecule behavior), IEEJ Technical Meeting on Sensors and Micromachines 2010, The Papers of Technical Meeting on Bio Micro Systems, 日本電気学会センサ・マイクロマシン（E）部門総合研究会資料，（バイオ・マイクロシステム研究会）, pp. 79-83, BMS-10-023, 平成22年6月17-18日、東京大学生産技術研究所、2010 (KIMM acknowledgment)
90-5. K.D. Park, N. Takama, T. Fujii, H. Fujita, B.J. Kim: Fabrication of Nanofluidic Channel with Novel Shapes by Shadow Evaporation and Wet Anisotropic Etching in KOH Solution, 工学とバイオ研究グループ研究交流会、東京大学生産技術研究所、2010年3月30日, (poster発表)
89-4. 金範埈：ナノ加工とバイオセンシングへの応用デバイス、精密の日2010講演会、東京大学精密機械工学専攻、東京大学武田ホール（武田先端知ビル５階）、pp. 8-14, 2010年4月6日、2010
88-3. 穐山翔、パトリックジネ、鄭一東、高間信行、金範埈：MEMS技術を用いたナノワイヤの製作およびバイオ物質センシングへの応用, 生産研究, Vol.62, No.3, pp. 249-254, (2010) (Sho AKIYAMA, Patrick GINET, Yi-Tung CHENG, Nobuyuki TAKAMA, and Beomjoon KIM, Fabrication of nanowire by conventional MEMS process and application for sensing bio-species, SEISAN-KENKYU, Vol. 62, No.3, pp. 249-254, 2010)
87-2. 李珠瓊, 齋治男, 金範埈, 後藤啓光, 毛利尚武, 増沢隆久: ホルダ付きピーリング複合工具の加工特性, 2010年精密工学会春季大会学術講演会講演論文集（G39), pp.573-574, 16-18. March, 埼玉大学, 東京, 17.March, 2010
86-1. Kyungduck Park, Nobuyuki Takama, Teruo Fujii, Hiroyuki Fujita, Beom Joon Kim: Fabrication of Nanofluidic Channel with Novel Shapes by Shadow Evaporation and Wet Anisotropic Etching in KOH Solution, Proceedings of The 12nd. Korean MEMS conference, Pusan, Korea, 1-3 April, pp. 355-356, (SP-3-33), 2010 (poster presentation)

2009

85-8. 池田晃、金長吉、ジャックファタチオリ、高間信行、金範埈：液中マイクロコンタクトプリンティングにおけるPDMSチップの観察, 生産研究, Vol. 61, No. 6, pp. 993-996, (2009) (Akira IKEDA, Janggil KIM, Jacques FATTACCIOLI, Nobuyuki TAKAMA, and Beomjoon KIM, Visual observation of PDMS tips in liquid micro contact printing, SEISAN-KENKYU, Vol. 61, No. 6, pp. 993-996, 2009)
84-7. Beomjoon Kim: NEMS and MEMS for bio-applications (Surface temperature control of silicon nanowires in dry and liquid condition), Journée GDR Thermique des Nanosystèmes et Nanomatériaux, ESPCI, Paris, 12 March, 2009
83-6. Kyungduck Park, Sangwook Lee, Nobuyuki Takama, Teruo Fujii, and Beomjoon KIM: Confinement of single DNA molecule in nanochannel fabricated by PDMS deformation, SEISAN-KENKYU, Vol. 61, No.2, pp. 130-134, 2009 (cover page)(PDMS変形を用いたナノチャナル内での単分子DNAの挙動特性、生産研究, Vol.61, No.2, pp.130-134, 2009)
82-5. 上杉賢一、金長吉、高間信行、金範埈：生体電位計測用フレキシブル電極の開発、2009年精密工学会春季大会学術講演会講演論文集(K09), pp.773-774, 11-13. March, 中央大学, 東京, 2009
81-4. S. Akiyama, Y. T. Cheng, J. Fattaccioli, N. Takama, P. Löw, C. Bergaud and B. J. Kim: Surface-temperature control of silicon nanowires in dry and liquid condition, The first Kangwon National Univ –Univ of Tokyo Joint workshop on Micromechatronics, IIS, The Univ of Tokyo, 25.Feb., 2009
80-3. A. Ikeda, J. Fattaccioli, J.G. Kim, N. Takama and B.J. Kim: Visual observation of PDMS tip in liquid micro contact printing, The first Kangwon National Univ –Univ of Tokyo Joint workshop on Micromechatronics, IIS, The Univ of Tokyo, 25.Feb., 2009
79-2. Janggil Kim, Jongho Park, Nobuyuki Takama, Beomjoon Kim:A study on development of softlithographic technology for micro patterning on non-planar surfaces, The first Kangwon National Univ –Univ of Tokyo Joint workshop on Micromechatronics, IIS, The Univ of Tokyo, 25.Feb., 2009
78-1. K.D. Park, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim: Arbitrary shape of nano spatial channels fabricated using polymeric deformation for single DNA stretching, The first Kangwon National Univ –Univ of Tokyo Joint workshop on Micromechatronics, IIS, The Univ of Tokyo, 25.Feb., 2009

2008

77-7. Beomjoon Kim: Si Nanowire FET sensors and temperature mapping, The 1st. Korea-Japan Joint workshop of MEMS/NEMS for YG, IIS, The Univ of Tokyo, August, 1, pp.129-149, 2008 (organized by BJ Kim, CIRMM)
76-6. J.G. Kim, N. Takama, B.J. Kim and H. Fujita: Optical Softlithographic Technology for Patterning on Curved Surfaces, The 6th. Nano and Micro Systems (NAMIS) Workshop on “NEMS and Optical MEMS”, 26-27 September, Shonan Village, Japan, 2008
75-5. N. Steidle, N. Takama, B.J. Kim: Fast fabrication of micro tools with WEDG in deionized water, Proceedings of The 10th. Korean MEMS conference, Jeju Island, Korea, 3-5 April, pp. 105-106, 2008 (poster presentation)
74-4. Beomjoon Kim: Micro components and systems for nano/molecular Eng. (BJ Kim lab.), LIMMS/CNRS-IIS UMI 2820 Activity report (Jan.2004-Dec.2007), IIS, The University of Tokyo, 24.Jan., pp. 23-24, 2008
73-3. Jacques Fattaccioli, Nobuyui Takama, Beomjoon Kim: Advanced applications of nanowires and nanoporous membranes, LIMMS/CNRS-IIS UMI 2820 Activity report (Jan.2004-Dec.2007), IIS, The University of Tokyo, 24.Jan., pp. 77-78, 2008
72-2. Peter Low, Nobuyuki Takama, Beomjoon Kim, Christian Bergaud: High spatial resolution surface temperature mapping using fluorescent thermometry, LIMMS/CNRS-IIS UMI 2820 Activity report (Jan.2004-Dec.2007), IIS, The University of Tokyo, 24.Jan., pp. 65-66, 2008
71-1. Y.T. Cheng, Y.H. Cho, K.Nakagawa, N. Takama, H. Kawakatu, S.J. Cho, Y. Akagi, B.J. Kim: Novel Fabrication of Si nanowire and its biosensor application (Si ナノワイヤーの製作及びバイオセンサーへの応用), Extended Abstracts (The 55th. Spring Meeting, 2008) The Japan Society of Applied Physics and related societies
(2008年春期第５５回応用物理学関係連合講演会、講演予稿集), 2008年3月27日–30日, 日本大学理工学部船橋キャンパス, No.3, pp.1414 (28p-ZM-18), 2008 (口頭発表)

2007

70-10. Beomjoon Kim: Fabrication of multi-scale hybrid pattern master, The 4th. International Symposium for Nanoscale Mechatronics and Manufacturing, Seoul Kyoyuk Munhwa Hoekwan, Korea, 13-14, December, 2007
69-9. Beomjoon Kim: High spatial resolution fluorescent thermometry using Rhodamine B, Taiwan-Japan Bilateral Symposium on Research and Education of Nanotechnology, the National Cheng Kung University, Proc. of Symposium pp. 46-67, Tainan, Taiwan, 3-4, December, 2007
68-8. Peter Löw, Nobuyuki Takama, Beomjoon Kim, and Christian Bergaud: Measurement of the temperature distribution of resistively heated nanowires using CdSe/ZnS nanocrystals, SEISAN-KENKYU, Vol.59, No.6, pp.510-513, 2007
(金属ナノワイヤーと量子ドットを用いた局部温度センサーの製作（第一報）、生産研究, Vol.59, No.6, pp.510-513, 2007)
67-7. 齊藤毅、ローペーター、高間信行、金範埈：マイクロ水流を用いた電気めっきによるマイクロチューブの製作（第2報）、生産研究, Vol.59, No.2, pp. 101-105, 2007
(Takeshi Saito, Peter Low, Nobuyuki Takama, Beomjoon Kim: Fabrication of microtubes by electroplating combined with micro fluidics, SEISAN-KENKYU, Vol.59, No.2, pp. 101-105, 2007)
66-6. 金長吉，高間信行，金範埈: 自己組織化単分子膜を用いたマイクロ・ナノパターニング技術, 東京大学産学連携フォーラム２００７, 2007年1月22日、ポスター発表
65-5. Beomjoon Kim: Soft and probe lithography for bio-applications, LIMMS Workshop on Micro Nano Bio Integration, 27 Feb., Maison des Arts et Metiers, Paris, 2007
64-4. 왕학민, 조영학, 다카마 노부유키, 최갑승, 김형만, 김범준: 소형연료전지의 성능향상을 위한 채널의 설계, 내부 유동해석및 제작, (Hak-Min Wang, Younghak Cho, Takama Nobuyuki, Kap-Seung Choi, Hyung-Man Kim, and Beomjoon Kim: Design, Numerical Analysis of Channel Flow and Fabrication of Flow Channels for High Performance of Micro Fuel Cells), Proceedings of The 9th. Korean MEMS conference, Jeju Island, Korea, 5-7 April, pp. 398-401, 2007 (poster, in Korean)
63-3. Dong-Soo Kim, Sung-Woo Bae, Jun-Woo Kim, Kyoung-Yong Park and Beomjoon Kim: A Study on fabrication of protein array and cell culture using the ESD micro/nano patterning technology, Proceedings of The 9th. Korean MEMS conference, Jeju Island, Korea, 5-7 April, pp. 105-109, 2007 (poster)
62-2. 黄文泰, 李相旭, 趙永学, 高間信行, 藤井輝夫, 金範埈: Fabrication of nanochannels with electrode for analysis of single DNA molecule, IEEJ Technical Meeting on Sensors and Micromachines 2007, The Papers of Technical Meeting on Bio Micro Systems, 日本電気学会センサ・マイクロマシン（E）部門総合研究会資料，（バイオ・マイクロシステム研究会）BMS-07-15, pp.37-40, 平成19年7月2-3日、筑波大学　大学会館, 2007
61-1. 斉藤喬, 金長吉, 朴鍾淏, 高間信行, 金範埈: DNA分子の電気的特性を計測するPDMSナノチャンネルの製作に関する研究（第一報）, IEEJ Technical Meeting on Sensors and Micromachines 2007, The Papers of Technical Meeting on Bio Micro Systems, 日本電気学会センサ・マイクロマシン（E）部門総合研究会資料，（バイオ・マイクロシステム研究会）BMS-07-17, pp.45-48, 平成19年7月2-3日、筑波大学　大学会館, 2007

2006

60-12. 趙永學, 李相旭, B.L. Pioufle, 高間信行, 藤井輝夫, 金範埈: 単一細胞のエレクトロポレーション用マイクロチップの開発と分析, 東京大学生命科学研究ネットワーク・シンポジウム抄録集, pp.89, 11月25日, 2006 (poster presentation)
59-11.J.G. Kim, N. Takama, B.J. Kim: Large Area Hybrid Nano Contact Printing in Liquid, 5th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology, Oct.16-18, IIS-UT Tokyo and Karuizawa, pp. 17-21, 2006
58-10. B.J. Kim: Electric Field Assembly of Quantum Dots on Nanowires for Temperature Sensing, 5th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology, Oct.16-18, IIS-UT Tokyo and Karuizawa, pp. 115-118, 2006
57-9. 齊藤毅、ローペーター、高間信行、金範埈：マイクロ水流を用いた電気めっきによるマイクロチューブの製作(第2報)、日本機械学会第6回生産加工・工作機械部門講演会講演論文集(No.06-34), pp.203-204, 11月24-25日, 2006
56-8. 齊藤毅、ローペーター、高間信行、金範埈：マイクロ水流を用いた電気めっきによるマイクロチューブの製作、生産研究, Vol.58, No.2, pp. 129-132, 2006
(Takeshi Saito, Peter Low, Nobuyuki Takama, Beomjoon Kim: Fabrication of microtube by electroplating combined with micro fluidics, SEISAN-KENKYU, Vol. 58, No.2, pp. 129-132, 2006)
55-7. 益田直樹、金長吉、榊原昇一、野地博行、高間信行、金範埈：マイクロコンタクトプリンティングを用いたタンパク質のマイクロパターニング技術の開発、応用、生産研究, Vol.58, No.2, pp. 133-137, 2006
(Naoki Masuda, Janggil Kim, Shoichi Sakakihara, Hiroyuki Noji, Nobuyuki Takama and Beomjoon Kim : Direct patterning of active proteins using nano/micro contact printing technique, SEISAN-KENKYU, Vol. 58, No.2, pp. 133-137, 2006)
54-6. Janggil Kim, Nobuyuki Takama and Beomjoon Kim: Characterization and optimization of Liquid Microcontact Printing technique for nano-patterning in a large area, Proceedings of The 8th. Korean MEMS conference, Jeju Island, Korea, 7-8 April, pp. 657-662, 2006 (oral)
53-5. Moontae Hwang, Doosun Choi, Yeongeun Yoo, Nobuyuki Takama and Beomjoon Kim: Fabrication of 70 nm level master for Nanoimprinting using E-beam lithography, Proceedings of The 8th. Korean MEMS conference, Jeju Island, Korea, 7-8 April, pp. 617-620, 2006 (poster)
52-4. Dong-Soo Kim, Won-Hee Lee, Hyuneui Lim, Beom-Joon Kim, Young-Doo Park, and Kyu-Back Lee: Fabrication of Protein microarrays for cell culture using Electrospray Deposition method, Proceedings of The 8th. Korean MEMS conference, Jeju Island, Korea, 7-8 April, pp. 51-54, 2006 (poster)
51-3. Peter Low, Beomjoon Kim, Christian Bergaud: Nanoscale heating devices for single molecule studies, LIMMS Activity Report (Mid-term evaluation), April2004-March2006, pp.65-66, 2006
50-2. V. Blech, N. Takama and B.J. Kim: Silicon stencil mask-stress management and bio-applications, LIMMS Activity Report (Mid-term evaluation), April2004-March2006, pp.82-83, 2006
49-1. Beomjoon Kim: Unconventional Nano/Micro patterning technologies in large area with low cost, LIMMS Activity Report (Mid-term evaluation), April2004-March2006, pp.84-85, 2006

〜 2005

48-8. Younghak Cho, Teruo Fujii, Hiroyuki Fujita and Beomjoon Kim: Impedance measurement of single bio-cell, 4th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology (Seiken Symposium no.41), Oct.18, EPFL, Swiss, 2005
47-7. 斉藤　毅、LOW Peter、高間信行、金　範埈：マイクロ層流を用いた電気メッキによるマイクロチューブの製作、電気加工学会全国大会　講演論文集, 17-18.November, 新潟県長岡市, pp. 129-132, 2005
46-6. 金長吉、Vincent　Blech、高間信行、金範埈：マイクロコンタクトプリンティングを用いた自己組織化単分子膜の多重パターニング技術、東京大学生産技術研究所学術講演会・産学連携フォーラム合同講演会「教育と産学連携を通じた大学の社会貢献」、27.Jan. 2005 (poster)
45-5. Vincent Blech, Takama Nobuyuki and Beomjoon Kim: Nano stenciling through a cm2-wide silicon membrane, Proceedings of The 7th. Korean MEMS conference, Jeju Island, Korea, 7-9 April, pp. 451-454, 2005 (poster)
44-4. Won-Hee Lee, Hyuneui Lim, Dong-Soo Kim, Beom-Joon Kim, Ji-Yun Kim, Young-Doo Park, and Kyu-Back Lee: Electrospray Deposition as a Technique for the High Speed and Large Area Production of Protein Microarrays for Cell Culture, Proceedings of The 7th. Korean MEMS conference, Jeju Island, Korea, 7-9 April, pp. 285-288, 2005 (poster)
43-3. 金長吉、高間信行、金範埈：トップダウンとボトムアップ技術を用いた広面積マイクロ・ナノパターニング、社）日本印刷学会　第１１４回春期研究発表会講演予稿集, Tsukuba Univ., 3 June, pp. 153-158, 2005
42-2. V. Blech, N. Takama and B.J. Kim: Single-step sub-microscale patterning of cm2-scale surfaces, LIMMS Scientific Committee Report 2004-2005, pp.83-87, 2005
(http://www.cnrs.fr/STIC/Actus1erePage/2005/FrancJaponNano/index.htm#programme)
41-1. Beomjoon Kim: Exhibition “Zoom sur les micro et nano systemes”, the 7 March 2005- 7. April 2005: MEMS Shadow mask and PDMS stamp for Unconventional micro/nano patterning, (http://www.cnrs.fr/STIC/Actus1erePage/2005/ZOOM/index.html), 2005
40-8. D. Grogg, M.A.F. van den Boogaart, H. Kawakatsu , J. Brugger, B.J. Kim: Resistless Fabrication and Characterisation of Metal Nanolevers Arrays, TNT 2004 “Trends in Nanotechnology”, 13-17 Sept., Segovia, Spain, 2004
39-7. 赤松直樹，高野奈央，藤田博之，金範埈, Juergen Brugger: 層流を用いた電気めっき法によるマイクロ構造の製作”, 電気学会マイクロマシン･センサシステム研究会，pp.13-16, Feb., 2004
(Naoki Akamatsu, Nao Takano, Hiroyuki Fujita, Beomjoon Kim, Juergen Brugger: Replication of Microstructure by electrochemical deposition with micro fluid, The papers of Techinical Meeting on Micromachine and Sensor System, IEE Japan, MSS-04-4, pp.13-16, 27. Feb. 2004)
38-6. Younghak Cho, Seokkwan Hong, Jeongjin Kang and Beomjoon Kim: Characterization of Thermally Actuated Bimorph Probe for Single Cell Measurements Using Numerical Analysis, Proceedings of The 6th Korean MEMS Conference, Jeju, Korea, 4-8 April (in Korean, poster presentation) pp.125-130, 2004
37-5. Janggil Kim, Nobuyuki Takama, Beomjoon Kim: Novel Micro Contact Printing Technique for Multi-Patterning of Self-Assembled Monolayers, Proceedings of The 6th. Korean MEMS Conference, Jeju, Korea, 4-8 April, (Oral presentation) pp.14-18, 2004
36-4. Tae Mutsuo, Tomonori Nakazawa, Toshiki Niino, Akio Yamamoto, Beomjoon Kim, Yasuo Hoshi, Kokichi Ikeda, Masahiro Michihata and Hideki Kawakatsu: Making Five Atomic Force microscope for 200,000 yen each, SEISAN-KENKYU, Vol.56, No.1, pp.121-123, 2004
35-3. B.J. Kim, Y.H. Cho, D. Collard, F. Conseil, L. Buchaillot: Charactrization of individual bio-cells with thermally actuated probe arrays, CIRMM-CNRS Activity report (March 2003-Februray 2004), pp. 33-37, CIRMM 2004 scientific committee Tokyo, Japan, 2004
34-2. Janggil Kim, Nobuyuki Takama, Vincent Blech and Beomjoon Kim: SAM meets MEMS (II), The 4th Joint Workshop KIMM-EPFL-IIS on Micro/Nano System and Process Development, Seoul, Korea, October 11-12, pp.51-58, 2004
33-1. 寄稿：Beomjoon Kim, 스텐실마스크를 이용한 다기능 마이크로/나노 패터닝 기술의 개발, 기계와재료, 16권, 제1호, 통권59호, (한국기계연구원) pp.50-59, 2004 (ISSN 1226-9077, in Korean)
32-17. 赤松　直樹，鈴木　隆文，満渕　邦彦，藤田　博之, 金　範埈，竹内　昌治: 神経電位計測用フレキシブルシリコンプローブアレイ, 生産研究, Vol.55, No.2, pp.158-162, 2003
(Naoki Akamatsu, Takafumi Suzuki, Kunihiko Mabuchi, Hiroyuki Fujita, Beomjoon KIM, and Shoji Takeuchi: A silicon micro probe array on a flexible substrate for neural recording, SEISAN-KENKYU, Vol. 55, No. 2, pp.158-162, 2003)
31-16. 金長吉、唐崎兼三、高間信行、ユルゲンブルガ、金範埈: 機能性自己組織化単分子膜を用いたナノパターニング, 生産研究 Vol. 55, No.6, pp.483-488, 2003
(Janggil Kim, Kenzo Karasaki, Nobuyuki Takama, Juergen Brugger, and Beomjoon KIM: SAM meets MEMS: for micro/nano patterning, SEISAN-KENKYU, Vol. 55, No. 6, pp.483-488, 2003)
30-15. 六尾妙、中澤友則、新野俊樹、山本晃生、金範埈、星泰雄、池田耕吉、川勝英樹: 20万円で作る原子間力顕微鏡による結晶格子の観察, 生産研究, vol.55, No.6, pp.471-437, 2003
29-14. 趙永學、高間信行、藤田博之、金範埈：シャドウマスクを利用した鋭利な尖端を持つシリコンマイクロプローブカードの製作, 精密工学会　第8回「知能メカトロニクス」ワークショップ講演論文集、平成15 年8 月21 -22 日, 立命館大学理工学部, pp. 51-56, 2003
28-13. 赤松直樹, 鈴木隆文, 満渕邦彦, 藤田博之, 金範埈, 竹内昌治: 神経電位計測用フレキシブル剣山型プローブアレイ, 社団法人日本機械学会ロボティクス・メカトロニクス部門主催 [ロボティクス・メカトロニクス講演会’03], Hakoate, Hokkaido, 23-25 May, 2P1-3F-G7(1-2), 2003
(Akamatsu N, Suzuki T, Mabuchi K, Fujita H, Kim B.J., Takeuchi S.: A Probe Array on a Flexible Substrate for Neural Recording, JSME ROBOMEC 2003 Conference)
27-12. 金俊完、樋口俊郎、山形豊、竹内昌治、金範埈：静電スプレーによるタンパク質薄膜とSU8 カンチレバーを用いたバイオセンサの研究、2003年精密工学会秋季大会学術講演会、2-4.Oct., 富山大学, I32, 2003
26-11. 金俊完、山形豊、金範埈、竹内昌治、樋口俊郎：静電スプレーによるタンパク質薄膜とSU-8カンチレバーを用いた新しいバイオセンサ、日本機械学会2003年度年次大会, 5-8. August, 徳島大学, 2003
25-10. 金長吉、高間信行、金範埈: 機能性自己組織単分子膜を用いたマイクロ・ナノコンタクトプリンティング、第8回化学とマイクロ・ナノシステム研究会講演要旨集, P2-12, pp.49, Nov.18-19, Tokyo, 2003 (poster発表)
24-9. 金長吉、高間信行、金範埈: 機能性自己組織単分子膜を用いたナノパターニング、電気加工学会全国大会　講演論文集, 4-5.December, 京都市平安会館, pp. 91-94, 2003
23-8. K. Yamada, J.G. Kim, Y.H. Cho and B.J.Kim: Fabrication of nanostructures using novel nano patterning method combined with micro contact printing, The 8th. PNU-IIS Joint workshop on Production technologies, 15-16 Dec., pp. 53-57, 2003
22-7. N. Akamatsu, N. Takano, A. Bertsch, S. Metz, Ph. Renaud, B.J. Kim and J. Brugger: Replication of Micro/Nano-structure by Electrochemical Deposition using Micro Fluid Flows, The Second IIS-EPFL Joint Workshop on “Micro/Nano mechatronics and Production Technology”, 20th. Oct., Lausanne, Swiss, 2003
21-6. B.J. Kim: Nano fabrication using Self-Assembled Monolayers, The Second IIS-EPFL Joint Workshop on “Micro/Nano mechatronics and Production Technology”, pp.1-5, 20th. Oct., Lausanne, Swiss, 2003
20-5. S. Gopakumar, G. Kim, J. Brugger, B.J. Kim: Mix-and-Match patterning using micro/nanostencil and contact printing, Research review 2002, Institute of Microelectronics and Microsystems, pp.45, 2003
19-4. 金範埈: 単分子を見る、単細胞を触る－SAMを用いたMEMSデバイス製作, 生研セミナー「バイオ材料を使用したマイクロデバイスの設計・製造・計測法, 生研セミナーテキスト, 12月11日、pp.23-54, 2003
18-3. Beomjoon Kim: Presentation “Micro-Actuator for cell handling”, March 10-11, Ecole Nationale Superieure des Telecommunications, Paris, LIMMS/CIRMM scientific committee, CIRMM-CNRS Activity report (November 2000-Februray 2003), 2003
17-2. Beomjoon Kim: Presentation, SEIKEN Seminar, 生産技術研究奨励会生研セミナー“マイクロンメカトロニクス・マイクロマシンの最近の展開”, 「ﾏｲｸﾛ・ﾅﾉﾏｼﾆﾝｸﾞとﾊﾞｲｵMEMSに関するヨーロッパとの共同研究」講演, Feb., 28, 生研セミナーテキスト, pp.91-102, 2003
16-1. 星泰雄、川井茂樹、小林大、金長吉、趙永学、竹内昌治、金範埈、川勝英樹: カンチレバーのねじれ固有振動を用いた自己組織化単分子膜の観察, 第64回応用物理学会学術講演会講演予稿集, August 30-September 2, 福岡大学, No.2, p.606, 2003
15-7. Beomjoon KIM, Gyuman Kim and Juergen Brugger: Microstructures and microfabrication using thick photoresist, SEISAN-KENKU, Vol.54, No.2, pp.125-128, 2002
14-6. Beomjoon Kim, Gyuman Kim and Juergen Brugger: 自己組織化単分子膜のマイクロマシニングへの応用, SEISAN-KENKU, Vol.54, No.3, pp.198-203, 2002
13-5. Beomjoon Kim: Micro components system – SAM meets MEMS, Proc. of Seiken Symposium on Micro/Nano Mechatronics, No.30, pp.139-141, 2002
12-4. J. Brugger, G.M.Kim, B.J.Kim, J.Holleman, J.Huskens, E.ten Have, A.Kovalgin, M.Liebau, D.N. Reinhoudt, N.F. van Hulst: Tying Topdown to bottomup :Nano-engineering between molecular and µm-scale, Proc. of Seiken Symposium on Micro/Nano Mechatronics, No.30, pp.59-65, 2002
11-3. G.M.Kim, B.J.Kim, J.Holleman, J.Huskens, E.ten Have, A.Kovalgin, M.Liebau, D.N. Reinhoudt, N.F. van Hulst, and J. Brugger: TopDown meets BottomUp : Nano-engineering for link between nm- and mm-scale, Proc. of The 3rd. Korea-Switzerland Joint Symposium, June 19-20, pp.71-78, 2002
10-2. N. Akamatsu, T. Suzuki, K. Mabuchi, H. Fujita, B. Kim, S. Takeuchi: Design and Fabrication of a Flexible Micro Probe Arrays, 日本ロボット学会創立20周年記念学術講演会　論文集, Oct., 2002
9-1. B.J. Kim: SAM for micro/nano Pattern, The First EPFL-IIS joint workshop on Micro/Nano Mechatronics and Production Technology, pp.51-57, Oct. 2002
8. B.J. Kim, T. Masuzawa, M. Fujino: Dimensional measurement of small holes by Vibroscanning method (3rd Report) – Development of Twin-probe vibroscanning method, SEISAN-KENKU, Vol.48, No.4, pp.253-255, 1996 (in Japanese)
7. M. Hoummady, B.J. Kim, C. Bonjour, J-M. Friedt: Developpement de Microscopes a sondes locales miniatures, Rapport Scientifique CNRS/ LPMO (1997-1998), pp.74-75, 1998
6. B.J. Kim, T. Masuzawa, M. Fujino: Development of optical vibroscanning Method (1st Report) – Feasibility tests, Proc. of the Autumn Assembly of JSPE, pp.528, 1998 (in Japanese)
5. B.J. Kim, T. Masuzawa, M. Fujino: Development of Twin-probe vibroscanning Method (2nd Report) – Measurement of inside profile of microhole, Proc. of the Autumn Assembly of JSPE, pp.242, 1997 (in Japanese)
4. B.J. Kim, T. Masuzawa, H. Fujita: Measurement of the inside profile of microhole with micro-twin probe, Technical Digest of the 15th Sensor Symposium, pp. 72, 1997 (in Japanese)
3. B.J. Kim, C. Bergaud, S. Konishi, T. Masuzawa, H. Fujita: Fabrication of micro twin probe for dimensional measurement of microholes, 1996 Proc. of the Assembly of IEEJ, Vol. 3, pp.162-163, 1996
2. T. Masuzawa, B.J. Kim, M. Fujino: Development of Twin-probe vibroscanning Method (1st Report) – Feasibility tests using macro-model prototype, Proc. of the Autumn Assembly of JSPE, pp.291-292, 1995 (in Japanese)
1. B.J. Kim, T. Masuzawa, M. Fujino: Improvement of precision in Vibroscanning method (1st Report) – Influence of probe vibration, Proc. of the Autumn Assembly of JSPE, pp.737-738, 1994 (in Japanese)

その他

News (記事)

“A small temperature probe with a bright future”, March 2008 (Microscopy Focus, introduced on “Photonics Spectra”)
http://www.photonics.com/content/spectra/2008/March/microscopy/90838.aspx
“Low-cost chip stretches single molecules”, January 22, 2008 (“Nanotechweb.org” – Technology update)
http://nanotechweb.org/cws/article/tech/32436
INTRODUCTION TO LABORATORY”, January 11, 2007 (“JAPAN NANONET BULLETIN” – 87th Issue)
http://utsusemi.nims.go.jp/english/mailmag/2007/087b.html
“研究室紹介” Japan NanoNet Bulletin (第112号2006年5月10日)
http://www.nanonet.go.jp/japanese/mailmag/2006/112b.html
韓国　“電子新聞(ETNEWS, 2006年8月22日)” interview
http://www.etnews.co.kr/news/detail.html?id=200608210110
東京大学　超微細リソグラフィー・ナノ計測拠点　ウェブ内
http://nanotechnet.t.u-tokyo.ac.jp/result.html
EPFL visiting (invited) 2011. 7. 7~ 2011.8.4. Group of Prof. J. Brugger (EPFL STI IMT LMIS-1)
News “Flash”http://medias.epfl.ch/flash-newspaper
Korea News paper: (2012, 3,24)
http://news.donga.com/Society/New/3/03/20120324/45006629/1
http://japan.donga.com/srv/service.php3?biid=2012032420708
(Science Times: 2012, 7.6. 韓国科総講演記事)　
http://www.sciencetimes.co.kr/?news=%ED%95%B4%EC%99%B8-%ED%95%9C%EC%9D%B8%EA%B3%BC%ED%95%99%EC%9E%90-%EC%B2%A8%EB%8B%A8-%EB%B0%94%EC%9D%B4%EC%98%A4%EB%A5%BC-%EB%85%BC%ED%95%98%EB%8B%A4
(Chosun newspaper: 東大国際化 2013.9.3.)
http://news.chosun.com/site/data/html_dir/2013/09/02/2013090200111.html?Dep0=twitter
民団新聞紹介：2014.4.9.
http://www.mindan.org/kr/front/newsDetail.php?category=3&newsid=13834
http://www.mindan.org/front/newsDetail.php?category=3&newsid=18803
韓国産業放送局、チャネルi, “特集開局プログラム：大韓民国工学、道を尋ねる”2014.7.3. & 7.10.
http://www.chi.or.kr/program/vod_list.asp?currentPage=1&srchKey=&srchString=&code=100&menu1=N&menu2=
KIMM MOU 2014. July 18:
http://amenews.kr/atc/n.view.asp?P_INDEX=20993(신소재뉴스)
http://www.edaily.co.kr/news/NewsRead.edy?SCD=JE41&DCD=A00505&newsid=02364886606155832(이데일리뉴스)
http://m.mt.co.kr/new/view.html?no=2014071814470496896(머니투데이)
http://www.ggilbo.com/news/articleView.html?idxno=187520(금강일보)
http://www.dt.co.kr/contents.html?article_no=2014071802109976731002(디지탈 타임스)
http://www.hellodd.com/news/article.html?no=49544(대덕넷)
http://eto.co.kr/news/view.asp?Code=20140718161302430(경제투데이)
http://economy.hankooki.com/lpage/society/201407/e20140718150127120410.htm(서울경제)
http://www.kimm.re.kr/cyber/news_v.php?bm_seq=701&bo_seq=80(기계연구원뉴스)
展示会の出品：
『 Bio Japan 2014 』（10/15・16・17 パシフィコ横浜）小間番号：D-201
ＤＮＡ・細胞溶液・バイオ試薬の微少量を、０．０１〜１ピコリットルでディスペンス・分注できる『ニードル式ディスペンサ』を出展。
http://www.ics-expo.jp/biojapan/main/
韓国電子新聞　2014. 8.11. (interview for sensor network)
http://www.etnews.com/20140808000194
Korea, Tech-Biz Korea 2014 plenary talk:
http://www.etnews.com/20141107000160
http://www.etnews.com/20141125000224
http://www.etnews.com/20141125000328
http://m.news.naver.com/read.nhn?mode=LSD&mid=sec&sid1=105&oid=030&aid=0002321457 (photo)
http://www.etnews.com/20141125000229 (photo mine)
2015.６月２４日　“健康食品新聞”　　
東京大学生産技術研究所「マイクロニードル日韓ワークショップ」開催へ　告知記事。
2016. Jan.17. EPFL NEWS “Mediacom” Cover news” Producing electrical power with cardboard, tape, and a pencil”
http://www.epfl.ch/
http://actu.epfl.ch/news/producing-electrical-power-with-cardboard-tape-and/
Exhibition: The third edition of the Lausanne Technologies and Innovation Exhibition (STIL2016), Lausanne, Switzerland, March 16, 2016
雑誌 文藝春秋社Sports Graphic Number 976号、　April, 2019 スポーツ仕事人　“バイオセンサーの研究” Vol.123, pp.93　（2019.4．15）　https://number.bunshun.jp/articles/-/839049
日経産業新聞、2020年8月３１日付け　“貼るシートで血糖値測定”　記事
東大生研のプレスリリース，2020年9月14日　
http://www.iis.u-tokyo.ac.jp/ja/news/3339/
https://news.mynavi.jp/article/20201207-1545530/ (My Navi news)
https://www.techbriefs.com/component/content/article/tb/pub/techbriefs/bio-medical/38345
https://www.eurekalert.org/pub_releases/2020-09/iois-ppp091320.php
And interview: https://tectales.com/wearables-sensors/microoneedles-nano-sized-huge-impact.html　　
２０２１年３月２３日　テレビ朝日「グッドモーニング」
2021年4月28日　BS-TBS テレビ　「報道1930」
新型コロナワクチン開発
https://youtu.be/OldHBWBpuYg
https://www.youtube.com/watch?v=9TkPyF5zSRQ (工学とバイオ：金研紹介)
https://jp.ambafrance.org/Visite-de-l-ambassadeur-au-LIMMS-laboratoire-international-de-recherche-du-CNRS-au-Japon
2021年１０月１８日　共同通信、　東京新聞等、
https://nordot.app/822612918691479552
東京ＭＸ-ＴＶ：「医師専門サイト「MedPeer」内「MEDICAL NEWS LINE」の取材を受けました.
“微細な針で抗体検査痛みから解放” (2021年11月3日)
2022年7月1日Scientic Reports 論文登載：
https://www.nature.com/articles/s41598-022-14725-6
(以下、News in Engligh)
https://www.labpulse.com/index.aspx?sec=ser&sub=def&pag=dis&ItemID=803161
https://www.studyfinds.org/covid-test-3-minutes-no-blood/
https://theprint.in/world/novel-antibody-test-detects-covid-without-blood-sample/1020312/
https://www.eurekalert.org/news-releases/957544?language=japanese
https://www.news-medical.net/news/20220701/New-antibody-based-method-for-SARS-CoV-2-detection-does-not-require-a-blood-sample.aspx
https://news.abplive.com/health/new-patch-test-can-detect-covid-antibodies-within-3-minutes-report-1540335
https://ommcomnews.com/science-tech/new-patch-test-can-detect-covid-antibodies-within-3-minutes
https://publicnewstime.com/health-news/team-develops-new-covid-19-antibody-detection-method-that-does-not-require-a-blood-sample/
https://genprotocols.genengnews.com/primers/rapid-detection-of-diverse-infectious-agents-in-skin-interstitial-fluid-/30
https://www.genengnews.com/topics/translational-medicine/infectious-diseases/skin-patch-test-detects-covid-19-in-under-three-minutes/
https://www.iis.u-tokyo.ac.jp/ja/news/3908/
https://www.nikkei.com/article/DGXZRSP635633_Q2A630C2000000/
http://www.qlifepro.com/news/20220705/173925.html
https://research-er.jp/articles/view/112265
https://www.chosun.com/economy/science/2022/07/06/SCBZA4S7QFH5NP734ZZN26I6VA/
https://bio.nikkeibp.co.jp/atcl/release/22/07/04/13872/
https://dm-rg.net/news/a80e4825-043c-4f39-9f1d-17bb2bafda37
https://www.mapion.co.jp/news/column/cobs2442049-1-all/
https://www.technologyreview.jp/n/2022/07/06/280098/
https://www.excite.co.jp/news/article/Cobs_2442049/
https://news.biglobe.ne.jp/it/0706/mnn_220706_2220918817.html

Patent (特許)

特願2008-94463（整理番号：A001807，東大知的財産部管理番号30B07Y008-1）
出願２００８年４月１日
発明名称：円筒状コイル、円筒型マイクロモータ及び円筒状コイルの製造方法
発明者：中村一也1、園部忠1、藤田博之、金範ジュン、ジャックファタチオーリ（１．並木精密宝石株式会社）
特願2008-114261（整理番号：08J01881，東大知的財産部管理番号30B084002-1）
知的財産部受理日２００８年４月１８日
発明名称：ナノ構造体を用いたセンサ素子、分析チップ、分析装置、センサ素子の製造方法、分析方法
発明者：赤木与志郎1、曺勝鎮1、金範ジュン、川勝英樹（１．シャープ株式会社バイオセンシングシステム研究所）
(韓国)　特許10-2009-0105662号　(韓国特許Ref. No. P090718) 登録決定 2012年3月8日（公開特許10-2011-0048913）
発明名称：ナノチャネルの形成方法
発明者：：金範ジュン、박재원, 조영학, 한아름
(韓国)特許出願番号10-2016-0168011号（東京大学管理番号:30B168011-1）公開番号：KR10-2018-0066787
(国立大学法人東京大学/ジェネラルソーラー株式会社,出願日2016年12月9日)
発明名称：確率共振を通じた振動エネルギー収穫器及びこれを用いた振動エネルギー収穫システム　
発明者：金範埈、河野通隆、中野公彦、青木英嗣¹（１．ジェネラルソーラー株式会社）
国際出願　出願番号: PCT/JP2017/002192 (2017年1月23日　日本特許庁)
PG10-9001WO: (国際公開番号：WO/2018/105132)
確率共振を通じた振動エネルギーハーベスタ及びこれを用いた振動エネルギーハーベスティングシステム
(韓国)特許出願番号10-2016-0061903号 (株式会社ラパス,　出願日2016年5月20日, 2017年12月29日登録)
発明名称：マイクロニードル製造方法　
発明者：金正東¹、鄭道鉉¹、金範埈、金Hong Kee¹（１．株式会社ラパス）
(韓国)特許出願番号10-2016-0061909号 (株式会社ラパス,　出願日2016年5月20日，2017年9月14日登録)
発明名称：マイクロニードル製造用粘性物質供給装置　　　
発明者：金正東¹、鄭道鉉¹、金範埈、金Hong Kee¹（１．株式会社ラパス）
PCT 特許（米国） 2018.March 9^th. (from Raphas) – “METHOD FOR MANUFACTURING MICRONEEDLE”, inventors; Jungdong Kim, Do Hyeon Jeong, Beom joon Kim, Hong Kee Kim.
新規米国仮出願: マイクロニードル-(東大整理番号：30B183001-1)，出願日：2018年3月16日、出願番号：62/643,761
特許出願　（知的財産部管理番号30B183001-1、発明届出書提出日：２０１８年２月２３日、東大知的財産部受理日：２０１８年３月１日）―新規口腔粘膜炎治療用の溶解性マイクロ構造体のドラグデリバリーパッチの開発及び新規製造方法
発明者：金範埈、興津輝、高間信行、COLEMAN Anthony、木下梨恵、丸岡豊
PCT/JP2018/035899, (日本国内移行)特願2020-506118 (2020年9月14日)
特許出願　（知的財産部管理番号30B184002-1、発明届出書提出日：２０１８年4月24日、東大知的財産部受理日：２０１８年4月27日）―生体分解性マイクロニードルを用いた低侵襲・持続自己血糖計測用センサーパッチの開発
発明者：金範埈、高間信行
国際出願　（PCT/JP2018/020224, 2018, June 15） :検査チップ及び検査装置、発明者：金範埈、高間信行
日本国内移行　特願2020-506108 (2020年6月24日)
韓国特許公開　出願10-2020-7027592　(2018年5月25日)　公開番号2020-132889 (2020年11月25日)
中国特許公開　出願 201880091114.8 (2018年5月25日) 公開番号11836582 (2020年10月27日)
米国特許　出願　17/020，226　（移行2020年9月14日）　基礎出願番号 62/642,761
特許出願（知的財産部管理番号30B196001-1、発明届出書提出日：20１9年5月31日、東大知的財産部受理日：2019年6月5日）―硬球から作製した集光レンズを用いた皮膚中への効率的な光照射のためのOptical microneedle arrayの開発
発明者：金範埈、高間信行、河野淳一郎
発明の名称：マイクロレンズアレイおよび製造方法、並びにマイクロニードルデバイス
特許出願　特願2020-027282 (提出日：2020年２月２０日)
特許出願　特願2020-180910 (出願日2020年10月28日)
強皮症または瘢痕を治療するためのＨＧＦアプタマーを含む医薬組成物
発明者：伊藤大知、浅野善英、佐藤伸一、金範ジュン、山東信介、太田誠一、戚　蟠、植木亮介
特許出願　発明届出書提出日：2021年3月28日知的財産部管理番号30B214006-1, 知的財産契約・管理部受理日(2021年4月14日)
多孔質マイクロニードルを備えるパッチ型体液採取及び検査システム、及び当該マイクロニードルを製造する方法
（旧：複数生体指標測定のための紙基板センサ上に作製されたマイクロニードル）
発明者：金範埈、Bao Leilei, 高間信行、竹内魁(4,1,2,3)
国際出願 PCT/JP2021/030456 (2021年8月19日)
特許出願（特願2021-152537） :2021年9月17日 (PCT出願・台湾優先権主張出願)
マイクロニードルパッチ及びマイクロニードル構造体
発明者：金範ジュン、朴チョンホ、高麗洋佑(リンテック社)
国際特許PCT/JP2022/026226 (2022年6月30日)；マイクロニードルパッチ

BOOK (著書)

木村啓志，竹内昌治，金範埈，酒井康行，藤井輝夫，藤田博之,”Medical Bio” Ohmsha, 連載　細胞操作技術の最前線-第3回：細胞選択技術, 2009, July, pp. 8-10
金範埈、“MEMS/NEMS工学全集”テクノシステム（株）、2009年4月22日発刊、第3章　自己組織化単分子膜（表面修飾）のマイクロデバイス製作への応用、(桑野博喜　他共著、部分執筆), pp. 464-472, 2009
金範埈、“超微細パターニング技術―次世代のナノ・マイクロパターニングプロセス－”、サイエンス＆テクノロジー（株）、2006年2月28日発行、第5章トップダウンとボトムアップ技術を用いた広面積マイクロ･ナノパターニング、pp.37-45 (高原　淳　他共著、部分執筆), 2006
金範埈、“接着耐久性の向上と評価：劣化対策・長寿命化・信頼性向上のための技術ノウハウ”、情報機構（株）、2012年9月21日発行、（部分執筆、第２章第１節６項、第４章第２節３項, pp. 79-92, pp. 310-316）
金範埈、“バイオチップの基礎と応用-原理から最新の研究･開発動向まで：MEMS技術を用いた血液診断チップ”、シーエムシー出版、2015年10月15日発行、（部分執筆、第2 編第4 章6節 pp. 247-255. ISBN978-4-7813-1079-4）
金範埈、“センサ医工学-最新医療センシングの研究開発：マイクロニードルパッチ型センサー”、シーエムシー出版、2022年5月31日発行、（部分執筆、第3編第5章pp. 242-248. ISBN978-4-7813-1670-3）

Invited talk (招待講演)

国内

日本ものづくりの魂- From Nano science to Nano technology, 日本新電気電子産業技術展望, invited lecture, 海東日本技術情報センター, Seoul National University, Seoul, Korea, 27. May 2013.
Green Tech-Power of NEMS, Seoul National University Nano IP Enterprise Program (NIP The 7^th. Class), invited lecture, Seoul National University, Seoul, Korea, 22. May 2013. （6/23．Non-official Wonkwang University School of Medicine, invited lecture, Iksan, Korea）
HARMNST 2013学会報告、有機機能材料のリソグラフィ加工コンソーシアム第８回定例会、京都大学・桂キャンパス　桂インテックセンター　3Ｆ／桂ラウンジ、(invited talk), 2013年6月7日
NEMS meets Bio-sensing: Calixarene capped Ag nanoparticles for sensing、H25年度東大生研　第１回奨励会特別研究委員会（バイオ･マイクロ･ナノテク研究会）、東京大学生産技術研究所　Ew501/502, 2013年５月１０日
NEMS meets Bio/molecular engineering – there are plenty of things to do in the middle、国立国際医療研究センター研究所との「連携・協力の推進に関する協定」締結記念シンポジウム、東京大学生産技術研究所An棟コンベンションホール、2013年3月13日
NEMS meets Bio-sensing, ナノヒータのバイオ応用と自己組織化のNEMS応用, 東京大学機械システム・イノベーション国際拠点(GMSI), H24年度拡張ナノ空間実践演習(講義),　2012年6月28日
NEMS and Nano fabrication for bio-applications, 第３回在日韓国科学技術者協会碩学招請セミナー、2011年11月26−27日、熱海金城館温泉ホテル
マイクロメカトロニクスの現状と将来、第2回在日韓国科学技術協会合同分科会、四谷、韓国文化院、2011年2月26日
Micro components and systems for nano/molecular Engineering、2010年度　第２回在日碩学招請セミナー、熱海ホテル池田、2010年10月23日
高機能化、高集積化バイオセンサーチップの実現を目指して、大阪商工会議所主催、医療・バイオ機器の開発促進事業「次世代医療システム産業化フォーラム２００９」、大阪、10月27日、2009
ソフトリソグラフィー、自己組織化とそのＭＥＭＳへの応用、電子実装工学研究所IMSI総会および特別講演会、東京大学山上会館大講堂、５月２１日、2009
合同セミナー、東京大学外国人留学生の定着モデル、2009年2月3日、東京大学武田先端知ビル、武田ホール、東京大学国際連携本部 (教育)
生体単一細胞の測定用のMEMSデバイスの開発、電気学会第7回マルチセンシングマイクロ物理センサ調査専門委員会セミナー, 11月18日, 2005

海外

NMEMS meets Bio/molecular sensing, 2013 Symposium CMOS Emerging Technologies Research (2013 CMOSET), Hilton Whistler Resort and Spa, Whistler, BC Canada, July 17-19, 2013
SAM meets NMEMS, NMEMS for Bio-sensing, 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST 2013), Berlin, 21 – 24 April, 2013
Beomjoon Kim, Ryohei Ueno and Yasuhiro Yukawa: NMEMS meet Bio, molecular engineering, Université Claude Bernard Lyon 1 (University of Lyon 1), Laboratoire des Multimateriaux et Interfaces, UMR CNRS 5615, 18, February, Lyon, France, 2013 (Invited talk)
NEMS meets Bio/molecular engineering; there’re plenty of things to do in the middle, The 5^th. IEEE International Nanoelectronics Conference (IEEE INEC 2013), Singapore, 2-4. January 2013
NEMS meets Bio-sensing; there’re plenty of things to do in the middle, 2012 IEEE Nanotechnology Material and Devices Conference (IEEE-NMDC 2012), October 16-19, 2012, Waikiki Beach, Hawaii, USA, abstract book pp. 22, 2012
NEMS meets Bio-sensing; there’re plenty of things to do in the middle, 2012 Korean-ethnic Scientists and Engineers Academic Conference, (Bio/Bioengineering & Health session), abstract book KOFST p. 71-73, 4-6. July, KOEX, Seoul, Korea, 2012
NEMS meets Bio-sensing; there’re plenty of things to do in the middle, Yonsei University, Mechanical Eng., Seoul, Korea, 7. July, 2012
NEMS meets Bio-sensing-Nano fabrication techniques & applications for Personalized Diagnostics, Yonsei University, Seoul, Korea, 6. December, 2011
C-MOS Compatible Fabrication of Top-Gated Field Effect Transistor Silicon Nanowire Based Biosensors, Visiting professor Seminar, STI-IMT-LMIS, EPFL, Swiss, 20.July, 2011
Single-Cell heat-shock protein synthesis triggered by micro/nano wire heaters, Asia Mechatronics Forum 2011, Daegu, Korea, 25-Oct. 2011 (invited talk)
Micro Components & Systems for Nano/Molecular engineering: SEOUL SEMICONDUCTOR/SEOUL OPTODEVICE Central R&D Center，Ansan-si, Korea, 29.March, 2011
Micro Components & Systems for Nano/Molecular engineering: NEMS meets Bio-Sensing at the molecular level, Département de Chimie de l’École normale supérieure (ENS-Paris), France, 25. Feb., 2010. (http://www.chimie.ens.fr/seminaire/25_02_10.php)
Bio-MEMS for ICT, JST-ANR Workshop 2009 (French-Japanese Workshop in the field of Information and Communication Science and Technologies), Paris, France, 19-20. Nov., 2009.
Micro Components & Systems for Nano/Molecular engineering, 2nd. GIST Information and Mechatronics Week 2009, International Workshop on Nano-Photonics, Information and Communication, Medical Mechatronics, Plenary Talk, GIST, Gwangju, Korea, 24-25. September, 2009
Micro Components & Systems for Nano/Molecular engineering–SAM meets NEMS, School of Mechanical Engineering, Sungkyunkwan University, Invited seminar, 23.Jan-24.Jan.2007 (http://mech.skku.ac.kr/), 2007
Micro Components & Systems for Nano/Molecular engineering–SAM meets NEMS, KAIST, Korea, Invited seminar, 8.Feb.2007
NEMS meets bio-sensing in singular level, IT-SoC Fusion Conference 2007 (IT-SoC Fair 2007- Future on Chips), Invited seminar, 25-26.Oct., Proceeding on presentation materials pp. 203-227, Vanue COEX Jangbogo Hall, Seoul, Korea, 2007
NEMS device for bio-sensing in singular level, Department of Mechanical Engineering, Pohang University of Science and Technology, Korea, Invited seminar, 2.Nov.2007
NEMS meets Bio sensing in Singular level, ASPEN2007 (Asian Symposium for Precision Engineering and Nanotechnology 2007), 6-9.Nov.2007, Gwangju Institute of Science and Technology, Gwangju, Korea, pp. 634-637, 2007
MEMS to “BiPolyNa”, International SoC Design Conference (ISOCC 2006), Seoul, Korea, 26-27.Oct., pp.4-7, 2006
NEMS meets bio-sensing in singular level, The 5th East Asian Biophysics Symposium & the 44th Annual Meeting of the Biophysical Society of Japan (EABS & BSJ2006), Meeting program supplement 2, Vol.46, pp.S-106, November 12-16, 2006
Advanced NEMS-Unconventional nano patterning for biological applications, Yonsei NanoMedical National Core Research Center Invited Seminar, 10 April, Yonsei University, Korea, 2006
(http://nanomed.yonsei.ac.kr/community/notice.asp?code=notice&Func=view&num=35)
Top-down and bottom-up approaches for unconventional micro/nano patterning, The 2nd. International Workshop on Nanoscale Semiconductor Devices, June 2-3, Daegu Exco, Korea, pp. 425-445, 2005
Micro Components & Systems for Nano/Molecular engineering – SAM meets NEMS, International symposium on Bio Micro & Nanosystems, June 10, 2005, KIST-Seoul, Korea, pp. 151-173, 2005
SAM meets MEMS/NEMS, Proceeding on the 9th. PNU-IIS joint workshop on Production Technology, 13-14.Dec., pp.69-73, 2004
Micro Components and Systems for nano/molecular engineering, Workshop on Phase 1 research results and International Symposium on Micro Thermofluidic Devices, pp.67-84, 24 June, Seoul, Korea, 2004
Micro components and systems for NEMS – Micromachined tools for investigation of nanoworld, lecture on EPFL, Faculte STI, LMIS1, Doctoral Course-, 13 May, 2004
Recent activities at BJ Kim’s laboratory : Micro components & Systems for nano/molecular engineering, 27th. Assemblee Annuelle by Association des Scientifiques Coreens en France (ASCoF), Grenoble, France, (Journal de l’ASCoF, Vol.28, 24-26 Oct.2003, pp.17-26), 2003
Nanomechanics and measurement, Advanced techniques courses (Graduate school) on Micro Electro Mechanical Systems: from Microfabrication Techniques to Smart Microsystems, 13 May, Universite Catholiquede Louvain, Belgium (Lecture), 2002
16. Micromachined tools for investigation of nanoworld, 在仏韓国科学技術者協会創立25周年記念学術大会, 3 Nov., Paris, France, 2001

Program Committee member

■主学会会員：(正員)IEEE, MRS, 電気学会、応用物理学会、機械学会、電気加工学会、CHEMINAS学会、
l CRS (Controlled Release Society)
■Member of Editorial board:
American Journal of Physical Chemistry, Science Publishing Group (2012~),
Journal of the Korean Society for Precision Engineering (KSPE) (2013~)
International Journal of Precision Engineering and Manufacturing (IJPEM) (2009~)
ELSEVIER, Microelectronic Engineering, Advisory Editor, Asia-Oceania (2016~)
An Editor of International Journal of Precision Engineering and Manufacturing-Green Technology (IJPEM-GT) (from Jan.2017~Dec.2019)
http://www.springer.com/engineering/production+engineering/journal/40684

Member of International Program Committee of MARSS 2016 (International Conference on Manipulation, Automation and Robotics at Small Scales), Paris, France (July 18-22, 2016)
2015 IEEE-NANOMED Conference Technical Program Committees member, Workshop 2 Micro needles for new Transdermal Drug Delivery systems (Workshop organizer and Chair).
一般社団法人　電気学会　（H２７年度）部門役員：E部門　監査　(2015年４月より~)
日本マイクロニードル研究会、理事(2014. 11~)
Member of International Program Committee of MNE2015, Hague (The Micro and Nano Engineering Conference 2015), since 2015.March
Member of editorial board for Journal of Biomaterials Applications, (SAGE publication), since 2014.June 21.
http://www.sciencepublishinggroup.com/journal/news.aspx?journalid=128#　 Since Dec.21.2012.
Member of editorial board for Journal of the Korean Society for Precision Engineering, (KSPE), since 2013. March
Member of editorial board of IJPEM Since March of 2009. (IJPEM Website: http://www.springer.com/12541) (学会運営)
Member of program committee of “The 2^nd. International Conference on Manipulation, Manufacturing and 　Measurement on the Nanoscale (3M-NANO 2012)”, since 2011. Sept.
Member of technical program committee (TPC) of the ICEIC 2012 conference (International conference on Electronics, Information and Communication), 2011.
在日韓国科学技術者協会(KSEAJ)　理事 (2011年より)
3^rd. NAMIS International Autumn School lecture and Organize Committee, LAAS-CNRS, Toulouse, France, 14-18. September, 2009 教育活動
NAMIS International Autumn School lecture and Organize Committee, 29. Sep.-3. Oct., 2008 (2007. 1回目〜)
IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Program committee（プログラム委員）, 2007 Sept. 4-7, Micro and nanotechnology, ETH Zurich, Switzerland, (http://aim2007.ethz.ch/home.html)
NAMIS Autumn School lecture and Organize Committee, 1-5, Oct., 2007
2007 International SoC Design Conference (ISOCC 2007), Oct.15-16, Seoul, Korea, paper reviewer
2006 International SoC Design Conference (ISOCC 2006) Oct. 26-27, Sensors and MEMS session, Program Subcommittee chair and paper reviewer
LIMMS-CNRS scientific committee, 2001〜評価委員
5th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology (IIS-Karuizawa) program 実行委員, 2006
The First Symposium on Complex Medical Engineering (SICE), 第１回　複合医工学シンポジウム, 2006, 19-20 May, Kyoto プログラム委員
The First International Conference on Complex Medical Engineering-CME2005, May 15-18,Takamatsu, Japan (http://biomecha.eng.kagawa-u.ac.jp/CME2005/main.htm)　プログラム委員and, Session chairman, 2005
2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), July 24-28, Monterey, California, USA (http://www.aim2005.org/), プログラム委員2005
The 2nd. International Symposium on Nanomanufacturing (ISNM2004), KAIST, Daejeon, Korea, November 3-5, Publicity committee, 2004
Korea-Japan International symposium of Micro/Nano Mechatronics Technology, Daejeon, Korea, Organizing Committee, May.7, 2003
The Second IIS-EPFL Joint Workshop on Micro- and Nanomechatronics, EPFL, Lausanne, Swiss, Organizing Committee, Oct.20, 2003

ページトップ Page Top